Introduction
This manual provides detailed instructions for the safe and efficient use of your OttLite 823WG4 24W Extended Reach Floor Lamp. Designed to illuminate large workspaces, this versatile lamp features a wide shade, a sturdy yet lightweight base, and an adjustable flex neck, allowing you to position the wide area illumination precisely where needed. OttLite technology helps you see details clearly and colors accurately, enhancing your visual experience.
This graphic demonstrates the benefits of OttLite technology compared to standard lighting. It illustrates how OttLite accurately shows colors, allows for clear viewing of fine print and details, and reduces glare and eyestrain, enhancing visual comfort and precision.
Setup
Follow these steps to assemble and set up your OttLite 823WG4 Floor Lamp:
- Unpack Components: Carefully remove all parts from the packaging. Ensure all components, including the lamp head, flexible neck, pole sections, base, and AC/DC power adapter, are present and undamaged.
- Assemble the Base: Attach the main pole section to the lamp base. Twist clockwise until securely tightened.
- Attach Lamp Head: Connect the flexible neck and lamp head assembly to the top of the main pole section. Ensure the connection is firm.
- Position the Lamp: Place the lamp on a flat, stable surface. The sturdy base provides stability, but avoid placing it in high-traffic areas where it might be easily knocked over.
- Connect Power: Plug the AC/DC power adapter into the lamp's power input, then plug the adapter into a standard electrical outlet.
- Adjust Height and Angle: The lamp's height is adjustable, and the flexible neck allows for precise positioning of the light. Adjust the lamp to your desired height and angle for optimal illumination.
This image illustrates the adjustable height feature of the OttLite 823WG4 floor lamp, which can be set between 44 inches (111.8 cm) and 54 inches (137.2 cm). It also shows the base size of 12 x 9 inches (30.1 x 22.9 cm), providing stability for the lamp.
Operating Instructions
Operating your OttLite 823WG4 Floor Lamp is straightforward:
- Power On/Off: The lamp features a touch-sensitive switch. Gently touch the designated area on the lamp to turn it on or off.
- Adjusting Light Position: Utilize the flexible neck to direct the light precisely where you need it. The lamp is designed to provide wide-area illumination, making it ideal for various tasks.
- Optimal Use: For best results, position the lamp so that the light falls directly onto your workspace without creating shadows or glare.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your lamp:
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe down the lamp's surfaces. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Bulb Replacement: The lamp uses a 24W fluorescent bulb (Type C), rated to last up to 10,000 hours. When replacement is needed, ensure the lamp is unplugged and cool. Carefully remove the old bulb and insert a new OttLite Type C replacement bulb.
This image provides a close-up view of the lamp head, revealing the two 24W fluorescent bulbs inside their compartment. This area is where bulb replacement would occur.
Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to the lamp; bulb is loose or faulty. | Check if the power adapter is securely plugged into both the lamp and the wall outlet. Ensure the outlet is functional. Check if the bulb is correctly seated or needs replacement. |
| Light flickers. | Loose bulb; unstable power supply. | Ensure the bulb is securely tightened. Try plugging the lamp into a different outlet to rule out power supply issues. |
| Lamp is unstable. | Base not securely attached; uneven surface. | Ensure the pole is firmly screwed into the base. Place the lamp on a flat, level surface. |
Specifications
Detailed technical specifications for the OttLite 823WG4 Floor Lamp:
| Feature | Detail |
|---|---|
| Model Number | 823WG4 |
| Brand | OttLite |
| Lamp Type | Floor Lamp |
| Light Source Type | Fluorescent |
| Wattage | 24 watts |
| Switch Type | Touch |
| Control Method | Touch |
| Product Dimensions (D x W x H) | 6.06"D x 9.1"W x 44.79"H |
| Adjustable Height | From 44 inches (111.8 cm) to 54 inches (137.2 cm) |
| Base Material | Plastic |
| Shade Material | Plastic |
| Color | White |
| Item Weight | 13.7 Pounds |
| Power Source | Corded Electric |
| Included Components | Lamp, AC/DC Power Adapter |
| Indoor/Outdoor Usage | Indoor |
| Connectivity Technology | USB (Note: This lamp is not cordless) |
Warranty Information
OttLite Technologies provides the following warranty for this product:
- Bulbs: OttLite bulbs are covered for 1 year from the date of purchase.
- Lamps and Accessories: OttLite lamps and accessories (excluding batteries) are covered for 2 years from the date of purchase.
This warranty does not cover damages resulting from the use of the product for any purpose other than its intended use. Additionally, warranty coverage excludes OttLite items purchased "as is" or from unauthorized retailers.
Please retain your proof of purchase for warranty claims.
Support
For further assistance, technical support, or to inquire about replacement parts, please visit the official OttLite website or contact their customer service department. Refer to the product packaging or the OttLite website for the most current contact information.
When contacting support, please have your model number (823WG4) and purchase date readily available.
