Classic Cantabile X Keyboard Stand (Model 00032735) Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your Classic Cantabile X Keyboard Stand. Please read these instructions carefully before assembly and operation, and retain them for future reference. This sturdy X-shaped stand is designed to provide secure support for various keyboards, master keyboards, portable keyboards, and synthesizers, suitable for both home and stage environments.

Figure 1: Fully assembled Classic Cantabile X Keyboard Stand in silver finish.

2. Safety Instructions

• Ensure all components are securely fastened before placing any instrument on the stand.
• Do not exceed the maximum load capacity of 30 kg (6.6 pounds).
• Place the stand on a stable, level surface to prevent tipping.
• Keep fingers clear of moving parts during height adjustment to avoid pinching.
• Regularly inspect the stand for any signs of wear or damage. Do not use if damaged.
• Keep the Allen key and small parts out of reach of children.

3. Package Contents

Verify that all the following items are included in your package:

• 1 x Classic Cantabile X Keyboard Stand (main frame)
• 4 x Non-slip rubber sleeves (pre-installed on feet and support arms)
• 1 x Allen key (for initial assembly/disassembly)
• Cable ties (for integrated cable management)

Figure 2: Key features of the stand, including space-saving storage, quick setup, easy transport, low weight, and height adjustability.

4. Assembly Instructions

The Classic Cantabile X Keyboard Stand is designed for quick and easy assembly. The main X-frame is largely pre-assembled. The included Allen key is primarily for initial setup or disassembly for compact storage.

1. Unfold the Stand: Carefully unfold the X-shaped frame until it forms a stable base.
2. Adjust Height: Locate the quick-release mechanism at the center joint of the X-frame. Pull the lever or knob to disengage the locking pin.
3. Set Desired Height: Adjust the stand to one of the five available height positions. Ensure the locking pin fully engages into a hole for secure positioning.
4. Verify Stability: Gently rock the stand to ensure it is stable and all connections are secure before placing your instrument.
5. Cable Management: Utilize the integrated cable management feature and included cable ties to organize instrument cables, preventing clutter and trip hazards.

Figure 3: Close-up of the quick release mechanism for height adjustment, 5-way height adjustment points, intelligent cable management, and anti-slip pads.

Figure 4: Detailed views showing the 5-way height adjustment mechanism, the stable X-frame design, and the integrated cable management system.

5. Operation

The Classic Cantabile X Keyboard Stand offers simple and reliable operation for various playing positions.

5.1 Height Adjustment

The stand features a 5-position height adjustment system. To change the height:

1. Ensure no instrument is on the stand.
2. Locate the quick-release lever/knob at the central pivot point.
3. Pull the lever/knob outwards to disengage the locking pin.
4. Adjust the stand to the desired height by moving the upper arms up or down.
5. Release the lever/knob, ensuring the locking pin fully engages into one of the five adjustment holes. A distinct click indicates proper engagement.
6. Confirm the stand is stable before placing your keyboard.

5.2 Ergonomic Positioning

With a height adjustment range from 62 cm to 100 cm, the stand allows for an ergonomic and comfortable playing position, whether seated or standing. The non-slip rubber sleeves on both the feet and the instrument support arms ensure stability and prevent scratches to your instrument and floor.

Figure 5: The keyboard stand shown in its folded state for transport and storage, and in use at various adjustable heights.

6. Maintenance

To ensure the longevity and optimal performance of your keyboard stand, follow these simple maintenance guidelines:

• Cleaning: Wipe the stand with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the powder coating.
• Inspection: Periodically check all bolts, screws, and the quick-release mechanism for tightness and proper function. Tighten any loose fasteners with the provided Allen key if necessary.
• Rubber Components: Inspect the non-slip rubber sleeves for wear or damage. Replace if they show signs of deterioration to maintain stability and protection.
• Storage: For space-saving storage, the stand can be folded. Store in a dry environment away from extreme temperatures.

7. Troubleshooting

If you encounter any issues with your keyboard stand, refer to the following common problems and solutions:

8. Specifications

• Model Number: 00032735
• Brand: Classic Cantabile
• Shape: X-Shape
• Color: Silver
• Material: Metal with durable powder coating, Rubber (sleeves)
• Finish Type: Painted
• Height Adjustment: 5 positions, from 62 cm (24.4 inches) to 100 cm (39.4 inches)
• Seat Depth (Support Arm Length): 33.5 cm (13.2 inches)
• Base Width (Adjustable): Approximately 30 cm to 80 cm (11.8 inches to 31.5 inches)
• Item Weight: 3 kg (6.6 pounds)
• Load Capacity: Up to 30 kg (66 pounds)
• Special Features: Lightweight, Non-slip rubber cuffs, Quick release mechanism, Foldable for space-saving transport/storage, Integrated cable management.
• Assembly Required: Yes (minor assembly/adjustment)

Figure 6: Dimensional overview of the keyboard stand, showing height adjustment from 62-100 cm and base width from 30-80 cm.

9. Warranty and Support

For warranty information or technical support regarding your Classic Cantabile X Keyboard Stand, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.