Ideal Standard Idealrain S3 Shower Head User Manual

1. Introduction

Thank you for choosing the Ideal Standard Idealrain S3 Shower Head. This manual provides essential information for the safe installation, operation, and maintenance of your new shower system. Please read these instructions carefully before installation and retain them for future reference.

2. Product Overview

The Idealrain S3 Shower Head system is designed for comfort and functionality, offering three distinct spray functions and a durable chrome-plated finish. It includes a handheld shower head, a 1750mm hose, and a wall-mounted slide bar with an adjustable holder and soap dish.

2.1 Components

• Idealrain S3 Handheld Shower Head (3 Functions)
• Shower Hose (1750 mm length)
• Wall-Mounted Slide Bar
• Adjustable Shower Head Holder
• Soap Dish
• Mounting Hardware

2.2 Product Illustration

2.3 Technical Drawing and Dimensions

3. Safety Information

• Always turn off the main water supply before beginning any installation or maintenance.
• Ensure all connections are watertight to prevent leaks.
• Do not use abrasive cleaners or harsh chemicals on the chrome finish, as this may cause damage.
• If you are unsure about any part of the installation, consult a qualified plumber.
• Keep small parts out of reach of children.

4. Setup and Installation

The Idealrain S3 Shower Head system is designed for wall-mounted installation. Refer to Figure 2 for detailed dimensions and mounting points.

1. Prepare the Installation Area: Ensure the wall surface is clean, dry, and capable of supporting the unit. Mark the desired height for the slide bar, considering user comfort.
2. Mount the Slide Bar: Using the provided mounting hardware, securely attach the wall brackets for the slide bar. Ensure the bar is level before tightening.
3. Connect the Hose: Attach one end of the 1750mm shower hose to your existing shower mixer outlet (G1/2 connection) and the other end to the Idealrain S3 handheld shower head. Ensure rubber washers are correctly seated to prevent leaks.
4. Install Shower Head and Soap Dish: Slide the adjustable shower head holder onto the bar. Place the handheld shower head into the holder. Position the soap dish as desired on the bar.
5. Test for Leaks: Slowly turn on the main water supply and check all connections for any signs of leakage. Tighten connections if necessary.

5. Operating Instructions

The Idealrain S3 Shower Head features three distinct spray functions for a personalized showering experience.

• Changing Spray Functions: Rotate the spray plate on the shower head to cycle through the available spray patterns.
• Adjusting Shower Head Height: Press the button or lever on the adjustable holder to slide the shower head up or down the bar. Release to lock it in place.
• Adjusting Shower Head Angle: The holder allows for tilting the shower head to direct the water flow as desired.

6. Maintenance and Cleaning

Regular cleaning will help maintain the appearance and functionality of your Idealrain S3 Shower Head system.

• Chrome Finish: Clean the chrome-plated surfaces with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with water and dry with a soft cloth to prevent water spots.
• Nozzle Cleaning: The shower head nozzles are designed for easy cleaning. Periodically rub the silicone nozzles to dislodge any limescale buildup. For stubborn deposits, a solution of white vinegar and water can be used. Soak the shower head (if detachable) or apply the solution to the nozzles, then rinse thoroughly.
• Hose Cleaning: Wipe down the shower hose with a damp cloth and mild soap. Avoid harsh scrubbing that could damage the hose material.

7. Troubleshooting

If you encounter issues with your Idealrain S3 Shower Head, refer to the following common solutions:

• Low Water Pressure:
  • Check if the main water supply valve is fully open.
  • Clean the shower head nozzles for limescale buildup (see Maintenance).
  • Inspect the shower hose for kinks or damage.
• Leaking Connections:
  • Ensure all connections are tightened securely.
  • Check that rubber washers are correctly seated and not damaged. Replace if necessary.
• Irregular Spray Pattern:
  • Clean the shower head nozzles to remove any blockages (see Maintenance).

If problems persist, contact Ideal Standard customer support or a qualified plumber.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official Ideal Standard website. Keep your proof of purchase for any warranty claims.

For technical assistance or inquiries, please contact Ideal Standard customer service.