Beautyrest Heated Blanket User Manual

Introduction

Welcome to enhanced comfort with your new Beautyrest Heated Blanket. This oversized 60 in x 70 in electric throw blanket is designed to provide consistent warmth and coziness. Featuring soft microlight plush fabric reversing to billowy berber, it includes state-of-the-art Secure Comfort technology for temperature regulation and virtually no electromagnetic field emissions. With 3 heat settings and a 2-hour auto shut-off, this machine-washable blanket offers both convenience and peace of mind.

Important Safety Information

Please read all instructions carefully before using your heated blanket. Failure to follow these instructions may result in fire, electric shock, or injury.

Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
Do not use if the blanket is wet.
Do not use with pointed objects.
Do not use if the power cord or controller is damaged.
Always ensure the controller is uncovered when in use to avoid overheating.
Do not lay on top of the blanket to prevent damage to internal coils.
Do not ball up or fold your blanket while it is turned on.
This blanket is UL Certified and features virtually zero EMF emissions for your safety.

Diagram showing dos and don'ts for using the heated blanket, including keeping the controller uncovered, spreading the blanket evenly, and not folding or balling it up while on.

Figure 1: Important Dos and Don'ts for safe blanket usage.

Setup

Before first use, ensure the blanket is fully unrolled and laid flat. Connect the controller to the blanket by aligning the coupler and pushing firmly until it clicks into place. Then, plug the power cord into a standard 110-120V AC electrical outlet.

Folded blue heated blanket with the controller resting on top.

Figure 2: The Beautyrest Heated Blanket with its detachable controller.

Operating Instructions

Powering On/Off

To turn the blanket on, press the power button on the controller. The display will illuminate, showing the current heat setting. To turn it off, press the power button again.

Adjusting Heat Settings

Your Beautyrest Heated Blanket features 3 heat settings: Low, Medium, and High. Use the up and down arrow buttons on the controller to cycle through these settings and select your desired warmth level. The temperature ranges from 85°F to 105°F, depending on the surrounding temperature.

Auto Shut-Off

For added safety and convenience, the blanket is equipped with a 2-hour automatic shut-off feature. This ensures the blanket will turn off after two hours of continuous use, preventing overheating and conserving energy.

Close-up of the heated blanket's controller with buttons for power, heat settings (High, Med, Low), and a digital display.

Figure 3: Detailed view of the blanket's control unit.

Maintenance and Care

The Beautyrest Heated Blanket is machine washable for easy care. Always ensure the controller is unplugged and detached from the blanket before washing.

Washing Instructions

Disconnect: Unplug the power cord from the wall outlet, then detach the controller from the blanket.
Pre-soak (Optional): For best results, pre-soak the blanket in cold water for 15 minutes.
Wash: Machine wash on a gentle or delicate cycle in cold water with minimal detergent. Do not bleach.
Rinse: Rinse in cold water.
Spin Dry: Remove immediately after the spin cycle to prevent wrinkles.

Drying Instructions

Tumble Dry: Tumble dry on a low or medium heat setting for 5 minutes.
Air Dry: Gently stretch the blanket to its original size and shape, then hang to finish drying. Ensure it is completely dry before reconnecting the controller or storing.
Do Not: Do not hang with clothespins, do not iron, and do not dry clean.

A heated blanket being placed into a washing machine, illustrating the machine washable feature.

Figure 4: The blanket is conveniently machine washable.

Diagram illustrating the washing and drying process for the heated blanket, including hand wash/delicate cycle, cold water rinse, immediate removal after spin, tumble dry for 5 minutes, and air drying methods.

Figure 5: Step-by-step guide for washing and drying your blanket.

Troubleshooting

If you encounter any issues with your Beautyrest Heated Blanket, please refer to the table below for common problems and their solutions.

Problem	Possible Cause / Solution
Light blinking on controller.	Unplug and reconnect the controller, ensuring it is properly connected. If the issue persists, contact customer support.
Blanket does not heat well.	Ensure the blanket is powered on and set to the maximum level. Allow time for it to heat up.
Only parts of the blanket are getting warm.	This is usually caused by a bunched or pinched heating element. Lay the blanket flat, untucked, and free from heavy objects. Straighten the heating wires as needed to restore function. Lay the blanket flat and run your fingers along the wire, paying special attention to the top and bottom of the blanket where the wire bends. If any portion of the wire is twisted on itself, manually twist it back.

Specifications

Model Name: Auto Shut Off, Virtually Zero EMF, Multi Heat Setting, UL Certified, Machine Washable
Model Number: BR54-0308
Material: 100% Polyester (200gsm plush & 220gsm sherpa)
Color: Blue
Size: 60 inches (L) x 70 inches (W)
Heat Settings: 3 (Low, Medium, High)
Auto Shut-Off: 2 hours
Power: 110-120V @ 60Hz (Max 160W)
Item Weight: 4.41 pounds
Special Features: Reversible, Auto Shut Off, Adjustable Heat Setting, Flexible Wire, OEKO-TEX certified

Diagram showing the dimensions of the blanket as 60 inches by 70 inches.

Figure 6: Blanket dimensions.

Warranty and Support

Your Beautyrest Heated Blanket comes with a 5-year limited warranty, ensuring quality and reliability. For detailed warranty information, troubleshooting beyond this manual, or any other support needs, please refer to the official user guide or contact Beautyrest customer service.

You can access the full User Guide (PDF) here.

Beautyrest BR54-0308