Beurer BM 45
Contents
Beurer BM 45 Automatic Blood Pressure Monitor User Manual
Model: BM 45
1. Introduction and Overview
The Beurer BM 45 Automatic Blood Pressure Monitor is designed for non-invasive measurement and monitoring of arterial blood pressure in adults. It features touch sensor buttons and a white illuminated XL display for convenient operation. This device is clinically validated and includes arrhythmia detection and a colour-coded risk indicator according to WHO standards.

Figure 1.1: The Beurer BM 45 Automatic Blood Pressure Monitor with its large, illuminated display and touch buttons.
2. Safety Information
Please read this instruction manual carefully before use and keep it for later reference. This device is intended for self-measurement of arterial blood pressure and pulse rate. It is not a substitute for medical examination or treatment. Consult your doctor if you have any health concerns.
- Do not use the device on infants, small children, or patients with pre-eclampsia.
- Do not use the device in the presence of high-frequency surgical equipment.
- Avoid strong electromagnetic fields or mobile phones near the device during measurement.
- Measurements should only be taken on the upper arm.
- If you experience discomfort during inflation, press the START/STOP button to immediately release the pressure.
3. Product Components
The Beurer BM 45 Blood Pressure Monitor typically includes the following components:
- Blood Pressure Monitor Unit (main display and controls)
- Upper Arm Cuff (standard size, suitable for arm circumferences 22-36 cm)
- 4 x AAA Batteries
- Storage Bag
- Instruction Manual

Figure 3.1: The main unit of the Beurer BM 45 Blood Pressure Monitor alongside its upper arm cuff.
4. Setup
4.1. Battery Installation
The device requires 4 AAA batteries, which are included. To install or replace batteries:
- Open the battery compartment cover on the back of the device.
- Insert the 4 AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.

Figure 4.1: View of the battery compartment on the back of the Beurer BM 45, showing where to insert the 4 AAA batteries.
4.2. Connecting the Cuff
Connect the air tube from the cuff to the air connector on the left side of the blood pressure monitor unit.
Video 4.1: A demonstration of setting up the Beurer BM 45, including connecting the cuff and preparing for a measurement. This video highlights the ease of use and the smooth-fit cuff design.
5. Operation
5.1. Preparing for Measurement
- Rest for at least 5 minutes before taking a measurement.
- Avoid eating, drinking, smoking, or exercising immediately before measurement.
- Sit upright with your back supported and feet flat on the floor.
- Place your arm on a table so the cuff is at heart level.
5.2. Applying the Cuff
Follow these steps to correctly apply the upper arm cuff:
- Slide your arm through the cuff loop.
- Position the cuff on your bare upper arm, 2-3 cm above the elbow joint. The air tube should run along the inside of your arm.
- Fasten the cuff snugly using the hook-and-loop closure. Ensure two fingers can fit comfortably under the cuff.
- Verify the index mark on the cuff is within the "OK" range after fitting.

Figure 5.1: Step-by-step guide on how to correctly position and secure the cuff on the upper arm for accurate blood pressure measurements.
5.3. Taking a Measurement
Once the cuff is correctly applied and you are in a relaxed position:
- Press the START/STOP button. The display will illuminate, and all segments will briefly appear.
- The cuff will automatically inflate. Remain still and do not talk during the measurement.
- Once the measurement is complete, the cuff will deflate, and your systolic pressure, diastolic pressure, and pulse rate will be displayed.
- The measurement will be automatically saved to the selected user memory (M1 or M2).
- To turn off the device, press the START/STOP button again, or it will automatically shut off after approximately 3 minutes of inactivity.
6. Measurement Interpretation
The Beurer BM 45 features a colour-coded risk indicator on the left side of the display, which classifies your blood pressure readings according to WHO (World Health Organization) standards:
| Indicator Colour | Classification | Systolic (mmHg) | Diastolic (mmHg) |
|---|---|---|---|
| Green | Optimal/Normal | < 120 / 120-129 | < 80 / 80-84 |
| Yellow | High Normal | 130-139 | 85-89 |
| Orange | Grade 1 Hypertension | 140-159 | 90-99 |
| Red | Grade 2/3 Hypertension | ≥ 160 | ≥ 100 |
The device also features arrhythmia detection. If an irregular heartbeat is detected during measurement, a symbol will appear on the display. If this symbol appears frequently, consult your doctor.
7. Memory Functions
The Beurer BM 45 offers 2 user memory spaces (M1 and M2), each capable of storing up to 60 measurements. This allows for long-term monitoring of your blood pressure values.
- Accessing Memory: With the device off, press the M1 or M2 button to view the stored measurements for that user.
- Average Values: The device can display the average value of all stored measurements, as well as separate averages for morning and evening measurements over the past 7 days.
- Deleting Memory: Refer to the full instruction manual for steps on how to delete stored data, if necessary.
8. Troubleshooting
If you encounter issues with your Beurer BM 45, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on | Batteries are dead or incorrectly inserted. | Check battery polarity or replace with new AAA batteries. |
| "E2" or other error message displayed | Cuff not correctly applied, movement during measurement, or air leakage. | Re-apply cuff correctly, remain still and silent, check cuff connection. Repeat measurement after a few minutes. |
| Inaccurate readings | Incorrect cuff placement, insufficient rest before measurement, talking/moving during measurement. | Ensure proper cuff placement, rest for 5 minutes before measuring, avoid movement and talking. |
| Arrhythmia symbol appears frequently | Possible irregular heartbeat. | Consult your doctor for medical advice. |
9. Maintenance and Care
- Clean the device and cuff with a slightly damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Store the device in its storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Remove batteries if the device will not be used for an extended period.
- Do not attempt to repair the device yourself. Contact authorized service personnel for any repairs.
10. Specifications
Key technical specifications for the Beurer BM 45 Automatic Blood Pressure Monitor:
- Model: BM 45 (Item model number: 658.06)
- Measurement Method: Oscillometric, non-invasive blood pressure measurement on the upper arm
- Measurement Range:
- Systolic: 50 - 250 mmHg
- Diastolic: 30 - 200 mmHg
- Pulse: 40 - 180 beats/minute
- Accuracy:
- Pressure: ±3 mmHg
- Pulse: ±5% of reading
- Memory: 2 x 60 memory spaces
- Cuff Size: Standard upper arm cuff (22-36 cm)
- Power Source: 4 x 1.5V AAA batteries (included) or mains adapter (not included)
- Product Dimensions: 16.5 x 5 x 10.5 cm
- Product Weight: Approximately 530 g (without batteries)
- Display Type: LCD, illuminated XL display
- Features: Arrhythmia detection, risk indicator, automatic switch-off

Figure 10.1: Visual representation of the Beurer BM 45 monitor's dimensions, highlighting its compact size.
11. Warranty and Support
Beurer GmbH provides a warranty for this product. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Beurer website. In case of technical issues or questions regarding the device, please contact Beurer customer support or your local distributor.
For further assistance, you may visit the Beurer Store on Amazon.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.