STARK BOARDS Disposable & Reusable Cutting Boards User Manual

1. Introduction

This manual provides instructions for the proper setup, operation, and maintenance of STARK BOARDS Disposable & Reusable Cutting Boards. Please read this manual thoroughly before using the product to ensure safe and effective use.

STARK BOARDS are designed to provide a hygienic and convenient surface for food preparation, reducing the risk of cross-contamination. They are cut-resistant, FDA & USDA Food Grade, and BPA-free.

2. Product Overview

STARK BOARDS are supplied on a perforated roll, allowing users to easily tear off individual sheets as needed. Each sheet measures approximately 20 inches by 24 inches.

Figure 1: STARK BOARDS roll with a single sheet unrolled, demonstrating the product's form factor.

3. Setup

STARK BOARDS are available in rolls of 25, 50, or 100 sheets. The dispensing method varies based on the roll size:

• 25 and 50-sheet rolls: These come in a kraft box with "pad plugs" for easy dispensing directly from the box.
• 100-sheet rolls: These come with "core plugs" designed for use with a dedicated dispenser (such as the STARK BOARDS Dispenser) or a custom rig setup. The core plugs insert into the cardboard core of the roll and have a 1-inch diameter hole for smooth dispensing.

To set up your STARK BOARD:

1. Remove the roll from its packaging.
2. If using a 100-sheet roll, insert the core plugs into the ends of the roll's cardboard core and place it onto your dispenser.
3. Pull the desired length of board from the roll.
4. Tear along the perforation to separate a single sheet.
5. Before use, rinse the board with water to remove any debris that may have accumulated during shipping.
6. If you intend to use the STARK BOARD on a wet surface, ensure the surface is clean and free of debris. A small amount of water on the surface can help the board adhere securely.

Figure 2: STARK BOARDS roll in its packaging, highlighting the instruction label for initial preparation.

4. Operating Instructions

STARK BOARDS are designed for safe and hygienic food preparation. Follow these guidelines for optimal use:

• Placement: Lay the STARK BOARD flat on a clean, stable work surface.
• Cutting: Use the board for chopping vegetables, slicing meats, and other food preparation tasks. The material is cut-resistant to withstand typical kitchen knife use.
• Preventing Cross-Contamination: Utilize a fresh STARK BOARD for different food types, especially when switching between raw meats, poultry, seafood, and ready-to-eat foods. This practice significantly reduces the risk of cross-contamination.
• Food Safety: The boards are FDA & USDA Food Grade and BPA-free, ensuring they are safe for direct contact with food.

Figure 3: Demonstrating the use of a STARK BOARD for cutting fruit.

Figure 4: A STARK BOARD providing a clean surface for seasoning meat.

5. Maintenance

STARK BOARDS are designed for both disposable and reusable applications, offering flexibility based on your needs.

• Disposable Use: For maximum hygiene and convenience, dispose of the used STARK BOARD after each task, especially after preparing raw meats or highly allergenic foods. This eliminates the need for washing and prevents potential cross-contamination.
• Reusable Use: If you choose to reuse a board for similar food items (e.g., only vegetables), it can be cleaned. The product care instructions recommend Hand Wash. Wash thoroughly with soap and water, rinse, and allow to air dry completely before reuse. Inspect the board for deep cuts or damage before reusing; discard if significantly compromised.

6. Troubleshooting

• Board not adhering to surface: Ensure the work surface is clean and free of debris. A small amount of water on the surface can help the board adhere more securely.
• Difficulty tearing along perforation: Ensure you are tearing firmly and evenly along the perforated line. If the board is tearing unevenly, try starting the tear from a different point on the perforation.
• Excessive knife marks: While STARK BOARDS are cut-resistant, very aggressive cutting or serrated knives can leave marks. For extended board life when reusing, use smooth-edged knives and moderate pressure.

7. Specifications

8. Warranty and Support

Warranty information for STARK BOARDS is not provided within this manual. For details regarding product warranty, returns, or customer support, please refer to the product packaging or contact the manufacturer directly through their official channels.