Instruction Manual

Product Overview

The Hakko CHP TR-5000-R Pro Macro Soft Wire Cutter is a precision hand tool designed for flush-cutting applications on soft wires, primarily copper. Its robust construction and ergonomic design ensure durability, comfort, and precise cuts for various industrial and hobbyist tasks.

Image: The Hakko CHP TR-5000-R Pro Macro Soft Wire Cutter, featuring red ergonomic handles, a black steel body, and a visible spring mechanism for smooth operation. The angled jaws are designed for flush cutting.

Safety Information

Always observe the following safety precautions when using the wire cutter:

• Eye Protection: Always wear safety glasses or goggles to protect against flying wire fragments.
• Proper Use: Use the cutter only for its intended purpose: cutting soft copper wire up to 14 gauge (1.6mm). Do not use for hardened steel wire, screws, or other materials beyond its capacity, as this can damage the blades.
• Handle with Care: Keep fingers clear of the cutting jaws.
• Storage: Store the tool in a dry, safe place, out of reach of children.
• Inspection: Before each use, inspect the tool for any signs of damage, such as chipped blades or loose handles. Do not use a damaged tool.

Setup

The Hakko TR-5000-R wire cutter requires minimal setup. Upon unboxing, perform the following steps:

1. Unpack: Carefully remove the wire cutter from its packaging.
2. Inspect: Examine the cutting jaws for any manufacturing defects or shipping damage. Ensure the spring mechanism operates smoothly, returning the tool to the open position.
3. Clean: Wipe down the tool with a clean, dry cloth to remove any protective oils or debris.

Operating Instructions

Follow these steps for effective and safe operation:

1. Grip: Hold the wire cutter firmly with the dolphin-style nonslip hand grips. The ergonomic design is intended to reduce operator fatigue.
2. Position Wire: Place the wire to be cut as close to the pivot point of the jaws as possible. This provides maximum leverage and a cleaner cut.
3. Align for Flush Cut: The 21-degree angled jaw allows for flush cutting. Position the flat side of the jaw against the surface from which you want to cut the wire flush.
4. Cut: Apply steady, firm pressure to the handles until the wire is completely severed. Avoid twisting the tool during the cut.
5. Capacity: This tool is designed for soft wire up to 14 gauge (1.6mm). Attempting to cut harder or thicker materials may damage the blades.

Maintenance

Proper maintenance will extend the life and performance of your wire cutter:

• Cleaning: After each use, wipe the jaws and pivot area with a clean, dry cloth to remove any wire fragments or debris.
• Lubrication: Periodically apply a small drop of light machine oil to the pivot point to ensure smooth operation and prevent rust.
• Storage: Store the tool in a clean, dry environment to prevent corrosion. The Parkerized surfaces help prevent glare and increase corrosion resistance, but proper storage is still recommended.
• Blade Care: Avoid dropping the tool or using it to pry, as this can damage the precision-ground blades.

Troubleshooting

Specifications

• Model: TR-5000-R
• Construction Material: 5.0mm Heat-Treated Carbon Steel
• Jaw Angle: 21-Degree Angled Jaw for Flush Cut
• Max Cutting Capacity: 14 Gauge (1.6mm) Soft Wire (e.g., Copper)
• Handle Grips: Dolphin-style Nonslip
• Dimensions (Package): 7.36 x 5.12 x 0.55 inches
• Weight: 3.2 ounces
• Manufacturer: Quality Hand Tools (for Hakko)
• Country of Origin: USA

Support Information

For further assistance, technical support, or warranty inquiries regarding your Hakko CHP TR-5000-R Pro Macro Soft Wire Cutter, please contact Hakko customer service.

Visit the official Hakko website for contact details and additional product information: www.hakko.com