1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Genuine Chrysler 55277191AB Body Side Seal. This component is an Original Equipment Manufacturer (OEM) part designed to ensure a precise fit and optimal performance for specific vehicle models. Its primary function is to create a tight seal along the vehicle's body side, preventing water ingress, reducing wind noise, and providing cushioning for doors.
Please read these instructions carefully before proceeding with installation to ensure safety and product longevity.
2. Product Features
- Vehicle Specific Design: Engineered to fit specific Chrysler and Dodge vehicle models, ensuring compatibility and optimal sealing performance.
- OEM Quality: This is a genuine Original Equipment Manufacturer (OEM) part, guaranteeing adherence to Chrysler's stringent quality standards and specifications.
- Enhanced Sealing: Designed to effectively seal gaps, reducing wind noise, preventing water leaks, and keeping dust out of the vehicle cabin.
- Durable Construction: Made from high-quality materials for long-lasting performance and resistance to environmental factors.
3. Setup and Installation
The Genuine Chrysler 55277191AB Body Side Seal is designed for straightforward installation. It typically snaps onto the upper rail attached to the vehicle's cab or frame. While installation can often be completed in approximately 30 minutes, proper preparation and attention to detail are crucial.
3.1. Before You Begin
- Verify Part Number: Ensure you have the correct body side seal for the specific side of your vehicle (driver or passenger). The 55277191AB part number is typically for a specific side.
- Gather Tools: You may need basic hand tools for removing the old seal and cleaning the surface.
- Review Resources: Several instructional videos demonstrating removal and installation procedures for similar seals on Dodge Ram vehicles are available online (e.g., YouTube). Reviewing these can provide helpful visual guidance.
3.2. Installation Steps
- Remove Old Seal: Carefully pull off the existing body side seal. It is usually held in place by clips or a friction fit.
- Clean Surface: Thoroughly clean the mounting surface on the vehicle's body where the new seal will be installed. Remove any old adhesive residue, dirt, or debris to ensure a secure fit.
- Align New Seal: Begin by aligning one end of the new 55277191AB seal with the corresponding starting point on the vehicle's body rail.
- Press into Place: Gently but firmly press the new seal onto the rail, working your way along the entire length. Ensure the seal snaps securely into place and sits flush against the vehicle body. Do not use excessive force, as the seal is designed to fit without modification.
- Inspect Fit: Once installed, inspect the entire length of the seal to confirm it is properly seated and there are no gaps or loose sections. Close and open the door several times to check for proper door closure and seal compression.
Note: The correct part should not require any cutting or extensive adjustments to the vehicle's doors. If you encounter significant resistance or an improper fit, re-check the part number and installation alignment.
4. Operation
Once correctly installed, the Genuine Chrysler 55277191AB Body Side Seal operates passively to enhance your vehicle's comfort and protection. Its primary functions include:
- Noise Reduction: Minimizes wind noise and road sounds entering the cabin, contributing to a quieter driving experience.
- Weather Protection: Forms a barrier against water, dust, and debris, protecting the interior of your vehicle from environmental elements.
- Door Cushioning: Provides a soft contact surface for the door when closed, reducing impact and wear on the door and body frame.
No active operation is required from the user after installation. The seal performs its function continuously.
5. Maintenance
To ensure the longevity and effectiveness of your Genuine Chrysler 55277191AB Body Side Seal, follow these simple maintenance guidelines:
- Regular Cleaning: Periodically clean the seal with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the rubber material.
- Inspection: Regularly inspect the seal for any signs of wear, cracking, tearing, or deterioration. Pay attention to areas where the door makes contact.
- Lubrication (Optional): In dry climates or if the seal appears stiff, a silicone-based lubricant designed for rubber seals can be applied to maintain flexibility and prevent sticking.
- Prompt Replacement: If the seal shows significant damage or is no longer providing an effective barrier against water or noise, it should be replaced promptly to maintain vehicle integrity.
6. Troubleshooting
If you experience issues after installing your body side seal, consider the following:
6.1. Water Leaks or Excessive Wind Noise
- Improper Seating: Re-inspect the entire length of the seal to ensure it is fully seated and snapped into the body rail. Press firmly along the seal to secure any loose sections.
- Incorrect Part: Verify that the 55277191AB part number is indeed the correct seal for the specific side and model of your vehicle. Using the wrong part can lead to poor sealing.
- Damaged Seal: Check for any tears, cuts, or deformities in the new seal that might compromise its integrity.
- Door Alignment: In rare cases, door alignment issues might prevent the seal from compressing correctly. Consult a professional if you suspect door alignment is the problem.
6.2. Difficulty Installing
- Surface Obstructions: Ensure the mounting surface is completely clean and free of old adhesive or debris.
- Incorrect Orientation: Double-check that the seal is being installed in the correct orientation.
- Cold Weather: In very cold temperatures, rubber seals can become less flexible. Warming the seal slightly (e.g., indoors) before installation may help.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | Chrysler |
| Model Number | 55277191AB |
| Color | Black |
| Recommended Uses | Vehicle Body Side Sealing |
| Number of Items | 1 |
| Item Weight | 1.5 pounds |
| Product Dimensions | 19.3 x 13.5 x 2.8 inches |
| Manufacturer Part Number | 55277191AB |
| Exterior Finish | Painted |
8. Warranty and Support
This Genuine Chrysler 55277191AB Body Side Seal comes with a manufacturer's warranty, assuring its quality and performance. For specific details regarding the warranty period, coverage, and claims process, please refer to the documentation included with your purchase or contact Chrysler's official customer support.
For technical assistance, installation queries, or warranty claims, it is recommended to contact Chrysler customer service directly or visit their official website. When contacting support, please have your vehicle's VIN and the part number (55277191AB) readily available.
9. Product Media
9.1. Product Images
Image 1: The Genuine Chrysler 55277191AB Body Side Seal, coiled for packaging. This image displays the overall appearance and material of the seal.
9.2. Official Product Videos
Video 1: This video demonstrates the features of an automotive door weather stripping, including its sealing capabilities, length, and internal structure with EPDM side balls and a built-in metal buckle for strong grip.
Video 2: This video highlights the ease of installation, fast rebound, strong toughness, and internal metal clips of a durable EPDM foam rubber seal. It also illustrates its application in various vehicles like boats, RVs, SUVs, and cars, emphasizing its dustproof, waterproof, sound insulation, and windproof properties.
