simplehuman 5" Round Rechargeable Mini Travel Sensor Makeup Mirror Instruction Manual

Introduction

Welcome to the simplehuman 5" Round Rechargeable Mini Travel Sensor Makeup Mirror. This manual provides essential information for setting up, operating, and maintaining your new mirror. Designed for precision and convenience, it features a Tru-Lux light system and 10x magnification to ensure a clear and accurate reflection for all your grooming needs.

Key Features

• Tru-Lux Light System: Simulates natural sunlight (550 lux, CRI 90) for full color spectrum visibility.
• Sensor On/Off: Automatically illuminates as your face approaches, no buttons needed.
• Long-lasting LEDs: Rated for 40,000 hours of performance, eliminating bulb replacement.
• 10x Magnification: Provides an extremely close-up view for detailed tasks like tweezing and eye makeup application.
• Folds Down Flat: Easy storage and portability with an included padded travel case.
• Rechargeable: A single charge lasts up to 5 weeks.
• Distortion-Free Mirror: Precise curvature ensures a clear view without distortion, even at the edges.
• Maximum Adjustability: Offers two height options and swivels to your preferred angle.
• High Reflectivity: Ultra-clear, high-quality glass with high-purity aluminum coating for superior clarity.
• Cordless and Clutter-Free: No messy cords, ideal for any countertop or vanity.

What's Included

• simplehuman Sensor Mirror
• USB Charging Cord
• Cleaning Cloth
• Padded Travel Case

Setup

1. Initial Charge

Before first use, fully charge your simplehuman sensor mirror. Locate the USB charging port on the back of the mirror head. Connect the provided USB cable to the mirror and a compatible USB power adapter (not included). The indicator light on the base will illuminate green when charging and turn off when fully charged. A full charge can last up to 5 weeks with typical use.

Image: USB charging port on the back of the mirror.

2. Assembly and Positioning

The mirror is designed for easy setup. Simply unfold the mirror from its compact travel position. It offers two height options and the mirror head swivels to allow for optimal viewing angles. Place the mirror on a stable, flat surface.

Image: simplehuman mirror in upright position.

Operating Instructions

1. Sensor Activation

The mirror features a motion sensor that automatically turns on the Tru-Lux light system when your face approaches the mirror. The light will turn off automatically after a few seconds of inactivity.

2. Adjusting Brightness

To manually adjust the brightness of the light, touch and hold the sensor area on the mirror. The light will cycle through different brightness levels. Release your finger when the desired brightness is achieved.

3. Magnification

The mirror provides 10x magnification, ideal for precise tasks such as applying eyeliner, mascara, or tweezing eyebrows. Position your face close to the mirror for the clearest magnified view.

Image: A close-up view demonstrating the 10x magnification for eye makeup application.

4. Travel and Storage

For travel or storage, the mirror folds down flat. Gently push the mirror head down towards the base until it locks into a flat position. Store it in the provided padded travel case to protect it from damage.

Image: The simplehuman mirror folded flat, ready for storage in its travel case.

Maintenance

To clean your simplehuman sensor mirror, use the provided cleaning cloth or a soft, lint-free cloth. Gently wipe the mirror surface and the stainless steel body. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the mirror's finish or optical coating.

Troubleshooting

Light Not Turning On Automatically

• Ensure the mirror is sufficiently charged. Connect it to a USB power source and allow it to charge.
• Check that the sensor area (located at the top of the mirror) is clean and unobstructed.
• Verify that you are within the sensor's detection range (typically a few inches from the mirror).

Light Appears Dim or Flickering

• The battery may be low. Recharge the mirror fully.
• Adjust the brightness manually by touching and holding the sensor area.

Mirror Not Holding a Charge

• Ensure the USB cable and power adapter are functioning correctly. Try a different cable or adapter if available.
• If the issue persists, contact simplehuman customer support for assistance.

Specifications

Warranty & Support

This simplehuman product comes with a 5-year warranty. For warranty claims, technical support, or any product-related inquiries, please visit the official simplehuman website or contact their customer service directly.

Official simplehuman website: www.simplehuman.com

Safety Information

• Handle with care.
• Keep out of reach of children.