Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Brinks 2114-105 Tulip Style Door Knob. This passage knob is designed for use on hall and closet doors where no locking function is required. Please read all instructions carefully before beginning installation.
Safety Information
- Always wear appropriate personal protective equipment, such as safety glasses, during installation.
- Keep small parts away from children to prevent choking hazards.
- Use only the tools specified in this manual.
- Ensure the door is stable and properly supported during installation.
Package Contents
Verify that all components are present before beginning installation:
- Exterior Knob Assembly
- Interior Knob
- Latch Mechanism
- Strike Plate
- Mounting Screws
- Spindle
This image displays the disassembled components of the Brinks 2114-105 Tulip Style Door Knob. It includes the polished brass exterior knob, the interior knob, and the latch mechanism with its faceplate, ready for installation. The design is a classic tulip shape.
Installation Instructions
Required Tools
- Phillips Head Screwdriver
- Tape Measure
- Pencil
Door Preparation
Ensure your door meets the following specifications:
- Door Thickness: 1-3/8 inches to 1-3/4 inches (35mm to 44mm)
- Backset: Adjustable 2-3/8 inches or 2-3/4 inches (60mm or 70mm)
Step-by-Step Installation
- Install the Latch: Insert the latch mechanism into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with the provided screws. Adjust the latch to the correct backset (2-3/8" or 2-3/4") if necessary, by rotating the latch housing.
- Install the Exterior Knob: Insert the exterior knob assembly through the door, ensuring the spindle passes through the latch mechanism.
- Install the Interior Knob: Place the interior knob over the spindle, aligning the mounting posts with the holes on the exterior knob assembly.
- Secure the Knobs: Insert the long mounting screws through the interior knob's mounting posts and tighten them into the exterior knob assembly. Do not overtighten.
- Install the Strike Plate: Align the strike plate with the latch bolt on the door frame. Mark and chisel out the area if needed, then secure the strike plate with the provided screws.
- Test Operation: Close the door and test the knob's operation to ensure the latch retracts smoothly and the door closes properly.
Operation
The Brinks 2114-105 Tulip Style Door Knob is a passage function knob. It does not include a locking mechanism. To open the door, simply turn either the interior or exterior knob to retract the latch bolt. The knob will return to its original position when released.
Maintenance
- Cleaning: Clean the knob's surface with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Lubrication: If the knob mechanism becomes stiff over time, a small amount of graphite lubricant can be applied to the latch bolt and spindle mechanism. Do not use oil-based lubricants, as they can attract dust and debris.
- Tightening: Periodically check and tighten any loose mounting screws to ensure proper function and security.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Knob is loose or wobbly. | Mounting screws are loose. | Tighten the mounting screws on the interior knob. |
| Latch bolt does not retract smoothly. | Mechanism is dirty or dry. | Clean the mechanism and apply graphite lubricant. |
| Door does not close properly. | Strike plate misalignment or latch bolt not fully extending. | Adjust the strike plate position. Check for obstructions around the latch bolt. Ensure the latch is set to the correct backset. |
| Knob is difficult to turn. | Internal components are binding. | Disassemble, clean, and reassemble the knob, ensuring all parts are correctly aligned. Lubricate if necessary. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 2114-105 |
| Brand | BRINKS |
| Material | Metal (Brass, Bronze) |
| Finish | Polished Brass |
| Door Thickness | 1-3/8" to 1-3/4" (35mm to 44mm) |
| Backset | Adjustable 2-3/8" or 2-3/4" (60mm or 70mm) |
| Function | Passage (Hall/Closet) |
| Dimensions | 3.25 x 4.25 x 7.75 inches (Product) |
| Item Weight | 1.29 pounds |
Warranty Information
The Brinks 2114-105 Tulip Style Door Knob includes a Lifetime Warranty. For specific details regarding warranty coverage and claims, please refer to the official Brinks website or contact customer support.
Customer Support
If you encounter any issues not covered in this manual or require further assistance, please visit the official BRINKS website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
