Invacare Tracer SX5 Wheelchair User Manual

1. Introduction

This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your Invacare Tracer SX5 Wheelchair. Please read this manual thoroughly before using the wheelchair to ensure proper function and user safety.

The Invacare Tracer SX5 Wheelchair is designed for adults requiring mobility assistance. It features a lightweight yet durable carbon steel frame, making it suitable for both short-term and long-term use. The design prioritizes user comfort and ease of transport.

2. Key Features

• Durable Carbon Steel Frame: Constructed with 14-gauge cross braces for enhanced durability and strength, supporting up to 300 lbs.
• Comfortable Seating: Features dual-embossed nylon upholstery with heavy-duty inner liners to prevent stretching, ensuring long-lasting comfort.
• "No Flex" Urethane Rear Tires: Mounted on "no flex" wheels for smooth and stable operation.
• Dual-Axle Design: Allows for easy conversion of seat-to-floor height from 19.5 inches to a hemi-height of 17.5 inches.
• Desk-Length Arms: Flip-back armrests provide convenience, allowing users to pull closer to tables or desks.
• Compact Folding Design: Folds to a compact 13-inch width for easy transport and storage.
• Quick-Release Brackets: Facilitates easy addition and removal of Invacare legrests or footrests (sold separately) without tools.

3. Product Overview

Familiarize yourself with the main components of your Invacare Tracer SX5 Wheelchair.

Figure 1: Invacare Tracer SX5 Wheelchair, showing overall design.

Figure 2: Front view illustrating the overall width of 30.5 inches. Please note this width may not fit through all standard doorways.

Figure 3: Side view detailing the desk-length arms (flip-back for convenience), attachment points for footrests/legrests (sold separately), and the smooth urethane rear tires on "no flex" wheels.

Figure 4: Front view highlighting key dimensions: 22-inch seat and back width, adjustable seat height (17.5" or 19.5"), and quick-release brackets for legrests/footrests.

Figure 5: Rear view showcasing the comfortable padded nylon upholstery and the heavy-duty carbon steel frame, designed to support up to 250 lbs.

Figure 6: Top-down view demonstrating the compact 13-inch folded width, ideal for travel and storage.

4. Setup

4.1 Unpacking

Carefully remove the wheelchair from its packaging. Inspect all components for any signs of damage that may have occurred during shipping. If any damage is found, do not use the wheelchair and contact Invacare customer service immediately.

4.2 Opening the Wheelchair

1. Place the wheelchair on a flat, stable surface.
2. Grasp the handgrips and push outwards slightly to begin unfolding the frame.
3. Push down on the seat rails until the seat is fully open and flat. Ensure the cross braces are fully extended and locked into place.

4.3 Attaching Legrests/Footrests (Sold Separately)

The Invacare Tracer SX5 Wheelchair is compatible with various Invacare legrests and footrests (e.g., T94HEP, T94HAP, T94HCP, T93HAP, T93HCP). These attach using quick-release brackets.

1. Align the two pins on the legrest/footrest with the corresponding holes on the quick-release bracket on the wheelchair frame.
2. Push the legrest/footrest firmly into the brackets until it clicks securely into place.
3. To remove, press the release lever on the bracket and pull the legrest/footrest upwards and outwards.

4.4 Adjusting Seat Height (Dual-Axle)

The dual-axle design allows for two seat-to-floor height settings: 19.5 inches (standard) and 17.5 inches (hemi-height).

1. To adjust, locate the axle plate on the rear wheel assembly.
2. Remove the axle bolt and reposition the wheel axle to the desired height setting (upper holes for standard, lower holes for hemi-height).
3. Securely reinsert and tighten the axle bolt. Ensure both sides are adjusted to the same height.

5. Operating Instructions

5.1 Brakes

The wheelchair is equipped with push-to-lock wheel brakes. To engage the brakes, push the brake levers forward until they lock into position against the tires. To release, pull the levers backward. Always engage the brakes when transferring in or out of the wheelchair, or when stationary.

5.2 Propulsion

Users can self-propel by grasping the handrims on the large rear wheels and pushing forward. For assisted propulsion, a caregiver can push the wheelchair using the handgrips on the back of the chair.

5.3 Folding for Transport/Storage

1. Ensure the brakes are engaged.
2. Remove any legrests or footrests.
3. Lift the center of the seat upholstery upwards by the front and rear edges. The wheelchair frame will begin to fold inwards.
4. Continue lifting until the wheelchair is fully folded.
5. For compact storage, the rear wheels can often be removed by pressing the quick-release button on the axle (if applicable to your specific model).

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your wheelchair.

• Cleaning: Clean the frame and upholstery regularly with a mild soap and water solution. Avoid abrasive cleaners.
• Wheel Inspection: Periodically check the tires for wear and tear. Ensure all wheel spokes are intact and tight.
• Brake Check: Test the brakes regularly to ensure they engage firmly and hold the wheels securely. Adjust if necessary.
• Fasteners: Check all nuts, bolts, and screws for tightness. Tighten any loose fasteners.
• Moving Parts: Lubricate moving parts, such as axle bearings and folding mechanisms, with a silicone-based lubricant as needed.
• Storage: Store the wheelchair in a dry, clean environment away from extreme temperatures.

7. Troubleshooting

If you encounter problems not listed here or if solutions do not resolve the issue, please contact Invacare customer support.

8. Specifications

9. Warranty and Support

For warranty information, service, or technical support, please contact Invacare directly.

Manufacturer: Invacare

Contact Information: 1 (800) 333-6900

Please have your model number (TRSX52FBP) and date of purchase available when contacting support.