1. Product Overview
This document provides instructions for the Genuine Honda 73152-SHJ-A02 Garnish, a windshield-pillar side molding trim surround designed for specific Honda Odyssey models. This component is an original equipment manufacturer (OEM) part, ensuring precise fit and function as intended by Honda.
The garnish is a direct replacement part, specifically for the right side of the vehicle's windshield pillar. It is categorized as body hardware and reveal molding.
2. Compatibility
The Honda 73152-SHJ-A02 Garnish is compatible with various Honda Odyssey models. It is crucial to verify compatibility with your specific vehicle's year, make, and model before installation. Refer to the detailed compatibility list and diagrams provided.
Figure 2.1: Detailed compatibility list showing applicable Honda Odyssey models and years for the 73152-SHJ-A02 Garnish.
3. Installation Instructions
This garnish is designed for direct replacement. Professional installation is recommended. Ensure the vehicle is parked on a level surface with the engine off and parking brake engaged before beginning any work.
3.1. Required Tools (Typical)
- Plastic trim removal tools
- Screwdriver set (Phillips and flathead, as needed)
- Clean cloth
3.2. Installation Steps
- Preparation: Carefully inspect the new garnish for any damage. Ensure the installation area on the vehicle is clean and free of debris.
- Removal of Old Garnish:
- Using a plastic trim removal tool, carefully pry off the existing garnish from the windshield pillar. Start from one end and work your way along, releasing any clips or fasteners.
- Be gentle to avoid damaging the surrounding paint or other trim pieces.
- Once all clips are disengaged, remove the old garnish.
- Inspect Mounting Points: Examine the vehicle's mounting points for any broken clips or debris. Clean the area thoroughly.
- Install New Garnish:
- Align the new Honda 73152-SHJ-A02 Garnish with the mounting points on the right windshield pillar.
- Press firmly along the length of the garnish until all clips engage securely. You should hear a series of clicks as the clips lock into place.
- Ensure the garnish sits flush with the vehicle's body and there are no gaps.
- Final Check: Verify that the garnish is securely attached and properly aligned.
Figure 3.1: Exploded view diagram indicating the position of the side molding (labeled as 13) on the vehicle's windshield area. This diagram helps identify the correct placement for the garnish.
Figure 3.2: Detailed view of the specific garnish part, identified as item #13, for clear identification during installation.
4. Maintenance
The Honda 73152-SHJ-A02 Garnish requires minimal maintenance. Regular cleaning will help preserve its appearance and integrity.
- Clean the garnish regularly with mild automotive soap and water.
- Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
- Rinse thoroughly and dry with a soft, clean cloth to prevent water spots.
- Inspect the garnish periodically for any signs of looseness or damage.
5. Troubleshooting
If you encounter issues with the garnish, consider the following:
- Garnish is loose: Ensure all clips are fully engaged. Gently press along the length of the garnish to re-seat it. If clips are broken, replacement may be necessary.
- Gaps or improper fit: Double-check that the garnish is correctly aligned with the vehicle's body. Remove and re-install, ensuring proper alignment before pressing clips into place. Verify that the part number matches your vehicle's requirements.
- Damage to garnish: If the garnish is cracked, bent, or otherwise damaged, it should be replaced to maintain vehicle aesthetics and functionality.
6. Specifications
| Specification | Detail |
|---|---|
| Part Number | 73152-SHJ-A02 |
| Brand | Honda (Genuine OEM) |
| Vehicle Placement | Right Windshield Pillar |
| Fitment Type | Direct Replacement |
| Item Name | Side Molding |
| Category | Body Hardware, Reveal Moldings |
| Item Weight | Approximately 3 pounds |
| Package Dimensions | Approximately 44 x 8 x 8 inches |
| Exterior Finish | Smooth |
| Superseded Part Number | 73152-SHJ-A01 (if applicable) |
7. Customer Support
For further assistance, questions regarding the product, or order inquiries, please contact your authorized Honda parts dealer or the seller from whom the part was purchased. When contacting support, please have your vehicle's VIN and the part number (73152-SHJ-A02) readily available.
Business Hours: Typically 9 am to 5:30 pm EST (refer to seller's specific hours).
