Homelegance Rowe Twin/Twin Bunk Bed with Storage Instruction Manual

1. Product Overview

This manual provides instructions for the assembly, safe operation, and maintenance of your Homelegance Rowe Twin/Twin Bunk Bed. This bunk bed features a durable wood construction with a dark cherry finish and includes options for either a trundle bed or integrated storage drawers, designed for children's bedrooms.

Please read all instructions carefully before assembly and use to ensure safety and proper function.

2. Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Always use the recommended mattress size for both the upper and lower bunks to prevent entrapment or falls.
• Ensure all connections are tight before use and periodically check and tighten hardware.
• The upper bunk is not suitable for children under 6 years of age.
• Prohibit more than one person on the upper bunk.
• Always use the ladder for entering and exiting the upper bunk. Do not use substitute parts.
• Ensure guardrails are always in place on the upper bunk.
• Do not attach or hang items to any part of the bunk bed that are not designed for use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
• This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm (Proposition 65 warning).

3. Package Contents

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact Homelegance customer support for assistance.

• Bunk Bed Frame Components (Headboards, Footboards, Side Rails, Ladder)
• Slats for both upper and lower bunks
• Hardware Pack (screws, bolts, nuts, washers, Allen wrench)
• Trundle Bed or Storage Drawer Components (depending on model purchased)

Note: Mattresses are not included and must be purchased separately.

4. Setup and Assembly Instructions

Assembly is required for this bunk bed. It is recommended that two adults assemble the unit. Clear a spacious area for assembly and keep children and pets away from the assembly area.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratching.
2. Assemble Headboards/Footboards: Attach the side rails to the headboards and footboards for both the upper and lower bunks using the provided hardware. Do not fully tighten bolts until the entire frame is assembled.
3. Install Slats: Place the slats onto the support ledges of both bunk frames. Secure them with the provided screws.
4. Attach Ladder: Securely attach the ladder to the designated side of the bunk bed frame.
5. Assemble Trundle/Storage: If applicable, assemble the trundle bed or storage drawers according to their specific instructions and slide them into place under the lower bunk.
6. Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws. Do not overtighten.

Refer to the detailed diagrams included in your physical assembly guide for step-by-step visual instructions.

Figure 1: Assembled Homelegance Rowe Twin/Twin Bunk Bed with Trundle in Dark Cherry finish.

Figure 2: Assembled Homelegance Rowe Twin/Twin Bunk Bed with integrated storage drawers in Dark Cherry finish.

5. Operating Instructions

This bunk bed is designed for sleeping. Adhere to the following guidelines for safe operation:

• Weight Limits: The maximum weight capacity for the upper bunk is typically 175 lbs (79 kg). The lower bunk and trundle (if applicable) generally support up to 200 lbs (90 kg). Refer to the specific weight limits provided in your physical assembly guide.
• Ladder Use: Always use the ladder to access and exit the upper bunk. Ensure the ladder is securely attached before use.
• Guardrails: The upper bunk is equipped with guardrails. Ensure they are properly installed and maintained to prevent falls.
• Trundle/Storage: The trundle bed can be pulled out for an additional sleeping surface. Storage drawers can be used to store bedding, toys, or other items. Do not overload drawers.

6. Maintenance

Regular maintenance will prolong the life and safety of your bunk bed.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Hardware Check: Periodically (e.g., every 3-6 months) check all bolts, screws, and connections to ensure they are tight. Retighten as necessary.
• Structural Integrity: Inspect the bed frame for any signs of damage, cracks, or loose joints. Discontinue use if significant damage is found and contact customer support.
• Environmental Conditions: Avoid placing the bed in direct sunlight or near heat sources, which can cause wood to dry out or warp. Maintain a stable room temperature and humidity.

7. Troubleshooting

Here are solutions to common issues you might encounter:

• Squeaking Noises: Squeaking often indicates loose hardware. Check and tighten all bolts and screws. Applying a small amount of furniture wax or silicone spray to joints can also help.
• Wobbly Frame: A wobbly frame is usually due to uneven assembly or loose connections. Ensure the bed is on a level surface and all hardware is securely tightened.
• Drawers/Trundle Sticking: Check for obstructions in the tracks. Ensure the tracks are clean and free of debris. A silicone-based lubricant can be applied to the tracks if needed.
• Missing Parts: If you discover missing parts during assembly, do not attempt to substitute with other hardware. Contact Homelegance customer support immediately for replacement parts.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official Homelegance website. Homelegance typically offers a limited warranty against manufacturing defects.

If you have any questions, require replacement parts, or need assistance with assembly or troubleshooting, please contact Homelegance customer support:

• Website: Visit the Homelegance official website for contact details.
• Phone: Refer to your purchase documentation for customer service phone numbers.

Please have your model number (B2013DC-1) and proof of purchase ready when contacting support.