1. Introduction
This manual provides essential information for the safe and effective use of your NRS Healthcare M78366 Bathtub Board. Please read these instructions carefully before installation and use, and retain them for future reference. The bathtub board is designed to provide a stable seating surface over a bathtub, assisting individuals who require support while showering or bathing.
2. Safety Information
Important: Failure to follow these safety instructions could result in injury or damage to the product.
- Always ensure the bathtub board is securely clamped to the bathtub before use.
- Do not exceed the maximum user weight limit of 190 kg (418 lbs).
- Regularly inspect the board and clamps for any signs of wear, damage, or corrosion. Discontinue use immediately if any damage is found.
- Ensure the bathtub board is clean and dry before and after each use to prevent slipping and maintain hygiene.
- Use caution when transferring onto and off the board. Seek assistance if necessary.
- Do not stand on the bathtub board. It is designed for seated use only.
- Keep children away from the bathtub board unless supervised by an adult.
3. Package Contents
Your NRS Healthcare M78366 Bathtub Board package should contain the following items:
- 1 x NRS Healthcare M78366 Bathtub Board (711 mm length)
- Integrated non-slip clamps with rubber pads
4. Setup and Installation
Follow these steps to correctly install your bathtub board:
- Inspect the Bathtub Board: Before installation, visually inspect the board for any manufacturing defects or transit damage. Ensure all components are present and intact.
- Prepare the Bathtub: Ensure the bathtub edges are clean and dry where the board will be placed.
- Position the Board: Place the bathtub board across the width of your bathtub. The board should rest evenly on both edges of the tub.
- Adjust the Clamps: The board features adjustable non-slip clamps on the underside. These clamps are designed to secure the board to the inner rim of the bathtub.
Image 1: Underside of the bathtub board with adjustable clamps. This view highlights the mechanism used to secure the board to the bathtub rim, featuring grey adjustable clamps and white circular rubber pads for grip and protection.
Loosen the adjustment screws on each clamp. Slide the clamps inwards or outwards until they firmly grip the inner edge of your bathtub. The distance between the board edge and the clamps is adjustable from 25 mm to 90 mm.
- Secure the Clamps: Once positioned correctly, tighten the adjustment screws on both clamps firmly by hand. Do not overtighten. The rubber pads on the clamps prevent scratching and ensure a secure fit.
- Test Stability: Before first use, gently apply downward pressure to the center of the board to ensure it is stable and does not wobble or slide. If it moves, re-adjust and re-tighten the clamps.
Image 2: The bathtub board securely installed across a white bathtub. This image demonstrates the board's intended placement and how it provides a stable surface over the tub.
5. Operating Instructions
The NRS Healthcare M78366 Bathtub Board is designed for simple and safe operation:
- Transferring: Carefully transfer onto the center of the bathtub board. Use grab bars or other stable supports if available, especially if you have limited mobility.
- Seated Showering: Once seated, you can comfortably shower. The board's slatted design with small holes allows water to drain quickly, preventing pooling.
- Stability: The reinforced PVC construction provides maximum durability and comfort. The non-slip rubber pads and arcs under the board prevent slipping.
- Exiting: When finished, carefully transfer off the board. Ensure you have stable footing before standing fully.
Image 3: Top view of the NRS Healthcare Bathtub Board. This image showcases the slatted surface, designed for quick water drainage and user comfort.
6. Maintenance and Care
Proper maintenance ensures the longevity and safety of your bathtub board:
- Cleaning: Clean the board regularly with a mild soap and water solution. Rinse thoroughly and allow it to air dry completely. Avoid abrasive cleaners or harsh chemicals, as these can damage the PVC material.
- Inspection: Periodically check all parts for wear, cracks, or damage. Pay close attention to the clamps and rubber pads. Ensure all screws remain tight.
- Storage: When not in use for extended periods, store the bathtub board in a clean, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter any issues with your bathtub board, refer to the following common problems and solutions:
- Board feels unstable or wobbly:
- Ensure the clamps are correctly positioned and firmly tightened against the inner rim of the bathtub.
- Verify that the bathtub edges are clean and dry, providing good grip for the rubber pads.
- Check if the bathtub width is within the adjustable range of the clamps (25-90mm from board edge to clamp).
- Water is not draining quickly:
- Check if the drainage holes in the slats are obstructed. Clean any debris or soap residue.
- Board appears damaged:
- If you notice any cracks, breaks, or significant wear on the PVC or clamps, discontinue use immediately and contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | M78366 |
| Brand | NRS Healthcare |
| Material | PVC |
| Color | White |
| Product Dimensions (L x W x H) | 71 cm x 23 cm x 2 cm (710 mm x 230 mm x 20 mm) |
| Length (approx.) | 711 mm (28 inches) Image 4: Visual representation of the board's length, approximately 28 inches. |
| Item Weight | 2 Kilograms |
| Maximum User Weight Recommendation | 190 Kilograms (418 lbs) |
| Clamp Adjustment Range | 25 mm to 90 mm (distance from board edge to clamp) |
9. Warranty and Support
For warranty information or customer support regarding your NRS Healthcare M78366 Bathtub Board, please refer to the documentation provided at the time of purchase or contact NRS Healthcare directly through their official website or customer service channels. Keep your proof of purchase for any warranty claims.
