Product Overview
The TE 864900-2 is a 6-position circular receptacle connector, designed for panel mounting. It features LGH SKT (socket) terminals and is typically used in medical applications. This connector provides a reliable and secure electrical connection for various industrial and scientific equipment.
A black, square-shaped TE 864900-2 6 Position Receptacle Circular Connector, designed for panel mounting, showing the six internal contact points.
Setup
This section provides instructions for the initial setup and installation of the TE 864900-2 connector.
- Preparation: Ensure all components are present and undamaged. Verify that the mounting surface is clean and free of obstructions.
- Mounting Location: Identify the appropriate panel mounting location on your equipment. The connector is designed for secure integration into a panel.
- Panel Cutout: Prepare a suitable cutout in the panel according to the connector's dimensions. Refer to the product's technical drawing or datasheet for precise measurements to ensure a proper fit.
- Secure Fastening: Insert the connector into the prepared cutout. Secure it firmly using appropriate fasteners (not included) through the four designated mounting holes. Ensure a snug fit to prevent any movement or vibration.
- Terminal Connection: Connect the six terminals to their respective wires. Ensure proper polarity and secure crimping or soldering as per industry standards for LGH SKT connectors. Adhere to all relevant electrical safety guidelines.
- Verification: After all connections are made, visually inspect all terminals for secure and correct wiring. Confirm that the connector is properly seated and stable.
Operating Instructions
The TE 864900-2 connector is a passive component designed for reliable electrical connection. Its operation primarily involves proper mating with a compatible plug.
- Mating: Align the compatible plug connector with the 6-position receptacle. Ensure the keying features (if present) are correctly aligned.
- Insertion: Gently push the plug into the receptacle until it is fully seated and secured. A tactile click or firm resistance may indicate a proper connection. Avoid applying excessive force.
- Disconnection: To disconnect, firmly grasp the body of the plug and pull it straight out from the receptacle. Avoid pulling by the wires, as this can damage the connections.
- Environmental Considerations: Operate the connector within its specified temperature and humidity ranges to ensure optimal performance and longevity. Avoid exposure to corrosive substances or excessive moisture.
Maintenance
Regular maintenance helps ensure the longevity and reliable performance of your TE 864900-2 connector.
- Cleaning: Periodically inspect the connector for dust, dirt, or debris. Use a clean, dry, lint-free cloth to gently wipe the exterior. For internal contacts, use a specialized electronic contact cleaner if necessary, ensuring the system is powered off and disconnected from power sources before cleaning.
- Inspection: Visually inspect the connector for any signs of physical damage, such as cracks, bent pins, corrosion, or discoloration. Pay close attention to the contact areas.
- Connection Integrity: Ensure that the panel mounting remains secure and that all wire connections are tight and free from strain. Loose connections can lead to intermittent performance or failure.
- Storage: If the connector is to be stored for an extended period, keep it in a clean, dry environment, away from extreme temperatures, direct sunlight, and corrosive chemicals. Use protective caps if available.
Troubleshooting
This section provides guidance for common issues that may arise with the TE 864900-2 connector.
| Problem | Possible Cause | Solution |
|---|---|---|
| Intermittent Connection | Loose wiring, dirty contacts, damaged pins. | Check wire connections for tightness. Clean contacts using appropriate cleaner. Inspect for bent or broken pins; replace connector if damaged. |
| Difficulty Mating/Unmating | Misalignment, debris in receptacle, damaged housing or pins. | Ensure proper alignment and keying. Inspect and clean the receptacle for debris. If housing or pins are visibly damaged, replace the connector. |
| No Electrical Continuity | Incorrect wiring, open circuit in cable, faulty mating plug, internal connector damage. | Verify wiring diagram and connections. Test cable continuity. Test with a known good mating plug. If issues persist, the connector itself may be faulty and require replacement. |
If the issue persists after following these steps, or if you encounter problems not listed here, contact a qualified technician or TE Connectivity support for further assistance.
Specifications
Key technical specifications for the TE 864900-2 6 Position Receptacle Circular Connector:
- Model Number: 864900-2
- Type: Circular Receptacle Connector
- Positions: 6
- Mounting Type: Panel Mount
- Terminal Type: LGH SKT (Socket)
- Color: Black
- Application: Medical (as specified in product title)
- Manufacturer: TE Connectivity / AMP Brand
- ASIN: B00FRBYRQ0
- First Available: October 10, 2013
Warranty and Support
For information regarding warranty coverage and technical support for the TE 864900-2 connector, please refer to the official TE Connectivity website or contact their customer service directly. Specific warranty terms may vary based on region, product series, and purchase agreement.
Note: This manual provides general guidance. Always refer to the official manufacturer's documentation, datasheets, and technical drawings for the most accurate and up-to-date information regarding installation, operation, and safety.