RAB Lighting Sledr5 Steplight User Manual

1. Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your RAB Lighting Sledr5 Steplight. Please read these instructions thoroughly before installation and retain them for future reference.

The Sledr5 Steplight is a durable, energy-efficient LED fixture designed for illuminating steps, pathways, and other exterior areas, providing reliable and long-lasting performance.

2. Safety Information

• WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
• Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
• Ensure the supply voltage is compatible with the fixture's requirements (100V - 240V).
• Do not modify or alter the fixture. Any modifications may void the warranty and create a safety hazard.
• Handle the fixture with care to avoid damage. Do not install if the product is damaged.
• This fixture is designed for outdoor use. Ensure all connections are properly sealed to prevent water ingress.

3. Product Features

• High Output LED: Equipped with a 5-watt LED for efficient illumination.
• Long Lifespan: Designed for a 50,000-hour life, reducing maintenance needs.
• Durable Construction: Features superior heat sinking with a die-cast aluminum housing.
• ADA Compliant: Meets Americans with Disabilities Act requirements for projection from walls.
• Robust Finish: Chip and fade resistant polyester powder coat finish for lasting appearance.
• Versatile Voltage: Operates on 100V - 240V AC.
• Exterior Use: Specifically designed and rated for outdoor applications.

4. Package Contents

Please verify that all components are present and undamaged before proceeding with installation.

• RAB Lighting Sledr5 Steplight Unit (1)
• Installation Hardware (screws, wire nuts)
• User Manual (this document)

5. Setup and Installation

Important: Ensure power is disconnected at the circuit breaker before beginning installation.

The image displays the RAB Lighting Sledr5 Steplight, a compact, round fixture in a bronze finish. It features an integrated LED light source positioned behind a horizontal louvered opening, designed to direct light downwards for step illumination. The housing is robust, indicating suitability for outdoor environments.

1. Prepare Wiring: Turn off power at the main electrical panel. Use a voltage tester to confirm power is off.
2. Mounting Location: Identify a suitable junction box or recessed opening for the steplight. The fixture is designed to be mounted into a standard electrical junction box (junction box not included).
3. Wire Connections:
   • Connect the black fixture wire to the black (live) supply wire.
   • Connect the white fixture wire to the white (neutral) supply wire.
   • Connect the green or bare copper fixture wire to the green or bare copper (ground) supply wire.
   • Secure all connections with appropriate wire nuts and ensure they are tight.
4. Secure Fixture: Carefully tuck all wires into the junction box. Align the fixture with the mounting holes of the junction box and secure it using the provided screws. Ensure the fixture is flush and stable.
5. Seal (if applicable): For outdoor installations, apply a weather-resistant sealant around the edges of the fixture where it meets the mounting surface to prevent water intrusion.
6. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.

6. Operating Instructions

The RAB Lighting Sledr5 Steplight does not feature an integrated switch. Once properly installed and wired, the steplight will illuminate when power is supplied to its circuit. It is typically controlled by an external wall switch, timer, or a compatible lighting control system.

To operate, simply activate the external switch or control system connected to the steplight's circuit.

7. Maintenance

The Sledr5 Steplight is designed for minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Cleaning: Periodically clean the fixture with a soft, damp cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
• Inspection: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure the mounting is secure.
• LED Module: The LED light source is integrated and non-replaceable. Do not attempt to open or service the LED module.

8. Troubleshooting

If your Sledr5 Steplight is not functioning as expected, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, contact a qualified electrician or RAB Lighting customer support.

9. Specifications

10. Warranty and Support

RAB Lighting products are manufactured to the highest quality standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official RAB Lighting website.

For technical support, replacement parts, or any inquiries regarding your Sledr5 Steplight, please contact RAB Lighting customer service directly. Have your model number (SLEDR5) and purchase information ready when contacting support.

RAB Lighting Contact Information:
Please refer to the product packaging or RAB Lighting's official website for the most current contact details.