simplehuman ST3002 20cm Wall Mount Rechargeable Sensor Mirror Instruction Manual

Important Safety Information

Always follow the included instructions for proper installation and use. Keep the mirror away from heat sources and avoid dropping or impacting the mirror to prevent breakage. Do not use the mirror if the frame or glass is damaged. Always supervise children when using the mirror.

Product Overview

The simplehuman ST3002 Wall Mount Rechargeable Sensor Mirror is designed to provide optimal lighting and magnification for personal grooming. It features a Tru-Lux light system that simulates natural sunlight, 5x magnification for detailed viewing, and a telescopic swing arm for adjustable positioning.

Figure 1: Front view of the simplehuman ST3002 mirror.

Figure 2: Angled view of the simplehuman ST3002 mirror, showing its adjustable arm.

Setup

1. Mounting the Mirror

• The mirror is designed for wall mounting. It comes with all necessary hardware for installation.
• For secure installation, it is recommended to mount the mirror directly into a wall stud. Mounting into drywall alone is not advised due to the mirror's weight.
• Use the supplied bracket and screws for attachment.

2. Initial Charging

• Before first use, fully charge the mirror. The mirror is rechargeable and operates wirelessly.
• Locate the charging port on the side of the mirror.
• Plug in the provided charging cable. The indicator light will turn red when charging and blue when fully charged.
• A full charge can last up to 4-5 weeks with typical daily use.

Operating Instructions

1. Power On/Off and Sensor Function

• The mirror features an automatic sensor. It lights up as your face approaches and turns off automatically when you move away.
• To manually control the light, use the touch button on the mirror surface.
• The sensor's sensitivity increases once in use to prevent unexpected shut-off.

2. Adjusting Light Settings and Brightness

• The Tru-Lux light system simulates natural sunlight (600 lux, CRI 90) for accurate color rendering.
• Press the touch button on the mirror surface to cycle through different light settings (e.g., cool light, nature light).
• Long press the touch button to adjust the brightness level.

3. Using Magnification

• The mirror has two sides: one regular view and one 5x magnification side.
• Rotate the mirror head to switch between the regular and magnified views. The 5x magnification provides exceptional detail while allowing you to see your entire face.

4. Adjusting Mirror Position

• The telescopic swing arm allows for smooth and effortless adjustment of the mirror's angle and distance from the wall.
• The arm can extend and retract, and the mirror head can swivel 360 degrees, providing flexibility for various grooming needs.

Maintenance

Cleaning the Mirror

• To clean the mirror surface and sensor, use the provided microfiber cloth.
• For stubborn dust or marks on the finish, use only water and a fine microfiber cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.

Battery Care

• Recharge the mirror when the indicator light turns red.
• Regular charging ensures optimal performance and battery longevity.

Troubleshooting

Light Not Activating

• Ensure the mirror is sufficiently charged. Check the charging indicator light.
• Verify that the sensor area (usually at the bottom of the mirror) is clear and unobstructed.
• Try manually activating the light using the touch button.

Distortion in Mirror View

• The mirror is designed with precise curvature for distortion-free optics. If distortion is observed, ensure you are using the correct side (regular vs. 5x magnification) for your viewing distance.
• Inspect the mirror for any physical damage or impacts that might affect the glass.

Specifications

Warranty and Support

For detailed warranty information and customer support, please refer to the official simplehuman website or contact their customer service directly. Warranty terms may vary and typically cover manufacturing defects.