Ingenuity 27270
Ingenuity Thruway 72XW Series Extra-Wide Safety Gate
Model: 27270 | Brand: Ingenuity

Image: The Ingenuity Thruway 72XW Series Extra-Wide Safety Gate, shown fully assembled in its bronze finish.
1. Product Overview
The Ingenuity Thruway 72XW Series Metal Expansion Extra-Wide Safety Gate is designed to provide a secure barrier for children and pets in wide openings. Measuring 36 inches tall, this bronze metal gate is suitable for spaces between 44 inches and 72 inches wide. It can be installed using the included hardware kit, making it ideal for hallways, doorways, or large open areas. The gate features a 19-inch wide door that swings open in either direction and can be operated with one hand.
Key Features:
- Fits openings from 44 inches to 72 inches wide and is 36 inches tall.
- Hardware-mounted installation for enhanced security.
- 19-inch wide door for easy parent passage.
- Door swings open in either direction.
- One-hand operation for adults.
- Secure locking mechanism to contain children and pets.
- Narrowly spaced bars to prevent squeezing through.
2. Important Safety Information
WARNING: Read all instructions before assembly and use of gate. Keep instructions for future use.
- This gate is intended for use with children from 6 months to 24 months.
- This gate is not suitable for use at the top of stairs. Use only at the bottom of stairs or in doorways/hallways.
- Never use this gate to keep a child from reaching a pool or other body of water.
- Always ensure the gate is securely latched when not in use.
- Periodically check all fasteners to ensure they are tight and secure.
- Do not use if any components are missing or damaged.
- Never leave children unattended.
- Adult assembly required.
3. Setup and Installation
Required Tools (Not Included):
- Drill
- Screwdriver
- Pencil
- Measuring Tape
Before Installation:
Measure your opening carefully to ensure the gate will fit. The gate is designed for openings between 44 inches and 72 inches wide.

Image: A woman using a drill to prepare a wall for hardware-mounted gate installation. This illustrates the need for tools during setup.
Hardware Mounting:
This gate is designed for hardware-mounted installation, which provides extra security, especially when used at the bottom of stairs or in high-traffic areas. Follow the detailed instructions provided in the physical manual for precise drilling and mounting of the hardware.

Image: A woman holding a baby near a securely installed hardware-mounted gate, demonstrating its use in a home setting.
Initial Appearance During Installation:
During the initial stages of assembly, it is normal for the gate to appear slightly off-center or misaligned. This is part of the design and will correct itself as the gate is properly installed and secured to the wall using the hardware.

Image: A diagram illustrating how the gate may appear off-center before proper installation and aligned after installation, reassuring users about the assembly process.
4. Operating the Gate
Opening and Closing:
To open the gate, adults can easily slide the trigger and lift the door panel up with one hand. The gate is designed to lock securely, keeping children and pets contained.

Image: A close-up of a hand pressing the trigger and lifting the gate latch, demonstrating the one-hand opening mechanism.
Gate Swing and Auto-Close Feature:
The gate door allows for a swing of over 180 degrees. If the door is opened less than 90 degrees, it will auto-close. If opened beyond 90 degrees, it will stay open, providing convenience for continuous passage.

Image: A diagram showing the gate's swing capabilities, indicating that it auto-closes when opened less than 90 degrees and stays open when pushed beyond 90 degrees.
5. Care and Maintenance
To clean the gate, wipe its surface with a damp cloth using a mild detergent and warm water. Do not use abrasive cleaners or harsh chemicals, as these may damage the finish or material. Ensure the gate is dry before continued use.
6. Product Specifications

Image: A diagram clearly indicating the gate's dimensions: 36 inches (91.4 cm) in height (with arch) and an adjustable width of 44-72 inches (111.76-182.88 cm).
| Feature | Detail |
|---|---|
| Model Number | 27270 |
| Mounting Type | Hardware Mounted |
| Gate Height | 36 inches (91.4 cm) |
| Gate Width | Adjustable from 44 inches to 72 inches (111.76 - 182.88 cm) |
| Material | Metal |
| Color | Bronze |
| Item Weight | 24.7 pounds |
| Manufacturer | Kids2, Inc. |
| Target Gender | Unisex |
7. Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the documentation included with your purchase or visit the official Ingenuity website. You may also contact Ingenuity customer service directly for assistance with any product-related inquiries.
Visit the Ingenuity Store: Ingenuity Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.


