NexxTech Sports Timer Stopwatch User Manual

Introduction

Thank you for choosing the NexxTech Sports Timer Stopwatch. This multi-functional and water-resistant device is designed for precise timing in various sports and activities. Featuring a clear 3-line display with large digits and an amber LED backlight, it ensures easy viewing in all conditions. Please read this manual carefully to understand its features and operation.

Product Overview

Image: The NexxTech Sports Timer Stopwatch, yellow in color, displayed in its retail packaging. It features a large digital display, multiple control buttons, and comes with a braided neck strap. The packaging highlights its water resistance and backlight feature.

Key Features:

• Water resistant design for durability in various conditions.
• Equipped with a handy neck strap for convenient carrying.
• Amber LED backlight for clear visibility in low-light environments.
• Multi-functional capabilities: split time, lap time, and countdown function.
• 3-line display with large digit size for easy reading.
• 1/100 second chronograph for precise timing.

Setup

Battery Installation:

The stopwatch requires a battery for operation. Locate the battery compartment on the back of the device. Use a small screwdriver to open the compartment cover. Insert the required battery type (refer to specifications for details) ensuring correct polarity. Close the compartment securely.

Initial Power On:

Once the battery is installed, the stopwatch should power on automatically. If not, press any button to activate the display. The default display will typically show the time or be in stopwatch mode.

Operating Instructions

Button Functions:

• MODE: Cycles through different modes (Time, Stopwatch, Alarm, Countdown).
• START/STOP: Starts and stops the stopwatch/timer. Used for setting values in adjustment modes.
• LAP/RESET: Records lap/split times. Resets the stopwatch when stopped. Used for adjusting values in setting modes.
• RECALL: Recalls stored lap/split times from memory.
• LIGHT: Activates the amber LED backlight for a few seconds.

Time Mode:

In Time Mode, the display shows the current time, date, and day of the week. To set the time and date:

1. Press MODE until the time display is shown.
2. Press and hold LAP/RESET until the seconds start flashing.
3. Press START/STOP to advance the flashing digit.
4. Press LAP/RESET to move to the next setting (minutes, hours, date, month, day of week).
5. Repeat steps 3 and 4 until all settings are correct.
6. Press MODE to exit setting mode.

Stopwatch Mode (Chronograph):

This mode is used for measuring elapsed time, lap times, and split times.

1. Press MODE until "STOPWATCH" or "CHRONO" is displayed. The display should show 0:00:00.00.
2. Press START/STOP to begin timing.
3. To record a lap time: Press LAP/RESET. The lap time will be displayed briefly, while the stopwatch continues to run in the background.
4. To record a split time: Press LAP/RESET. The split time will be displayed, and the stopwatch will pause its display but continue timing internally. Press LAP/RESET again to return to the running time.
5. Press START/STOP again to pause the stopwatch.
6. With the stopwatch paused, press LAP/RESET to reset it to 0:00:00.00.

Alarm Mode:

Set an alarm to sound at a specific time.

1. Press MODE until "ALARM" is displayed.
2. Press and hold LAP/RESET until the alarm hour flashes.
3. Use START/STOP to adjust the hour, and LAP/RESET to switch to minutes.
4. Press MODE to exit setting mode.
5. To turn the alarm on/off, press START/STOP while in Alarm Mode (not setting).

Countdown Timer Mode:

Set a specific time for the timer to count down from.

1. Press MODE until "TIMER" or "COUNTDOWN" is displayed.
2. Press and hold LAP/RESET to set the countdown time (hours, minutes, seconds) using START/STOP to adjust and LAP/RESET to move between units.
3. Press MODE to exit setting mode.
4. Press START/STOP to begin the countdown.
5. Press START/STOP again to pause/resume.
6. When paused, press LAP/RESET to reset the countdown to the set time.

Memory Recall (RECALL):

The stopwatch can store multiple lap/split times. To view them:

1. Ensure the stopwatch is stopped.
2. Press RECALL to enter memory mode.
3. Use LAP/RESET or START/STOP to scroll through stored lap/split times.
4. Press MODE to exit memory mode.

Maintenance

• Cleaning: Wipe the stopwatch with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Water Resistance: The stopwatch is water resistant, meaning it can withstand splashes and light rain. It is not designed for submersion in water. Do not press buttons while the stopwatch is wet.
• Storage: Store the stopwatch in a cool, dry place when not in use. Avoid extreme temperatures.
• Battery Replacement: Replace the battery when the display becomes dim or unresponsive. Ensure the battery compartment is sealed properly after replacement to maintain water resistance.

Troubleshooting

Specifications

• Brand: NexxTech
• Model Number: 6315022
• Color: Yellow
• Display: 3-line digital display with large digits
• Backlight: Amber LED
• Functions: Stopwatch (1/100 second chronograph), Lap/Split time, Countdown Timer, Alarm, Time/Date display, Memory Recall
• Water Resistance: Yes (splashes and light rain)
• Power Source: Requires battery (type not specified, typically button cell)
• UPC: 741235135777

Warranty and Support

Specific warranty information is not provided with this manual. Please refer to the product packaging or the retailer's website for details regarding warranty coverage and terms.

For technical support or further assistance, please contact NexxTech customer service through their official website or the contact information provided on the product packaging.