OOK 50085 Eyelet Picture Hangers Instruction Manual

1. Introduction

This manual provides instructions for the proper installation and use of OOK 50085 Eyelet Picture Hangers. These hangers are designed for securely mounting lightweight objects, such as pictures and small decorative items, up to 5 pounds. Please read these instructions carefully before installation to ensure safe and effective use.

2. Safety Information

• Do not exceed the maximum weight capacity of 5 pounds per hanger.
• Ensure the hanger is firmly secured to the wall material before hanging any object.
• Keep out of reach of children.
• Wear appropriate safety gear, such as eye protection, if using tools for installation.
• Inspect the hanger and the hung item periodically for signs of wear or instability.

3. Package Contents

Your OOK 50085 Eyelet Picture Hangers package typically includes:

• Multiple OOK 50085 Eyelet Picture Hangers (e.g., 12 count, as per product information).

Note: The exact quantity may vary based on the specific product packaging.

4. Setup and Installation

The OOK 50085 Eyelet Picture Hangers are designed for self-adhesive installation on various surfaces including concrete, drywall, and wood. Follow these steps for proper installation:

1. Prepare the Surface: Ensure the wall surface is clean, dry, and free from dust or debris.
2. Mark the Location: Determine the desired hanging location for your item. Lightly mark the spot on the wall where the hanger will be placed.
3. Remove Protective Backing: Carefully peel off the protective backing from the adhesive side of the eyelet hanger.
4. Apply Hanger: Align the hanger with your marked spot and firmly press it against the wall for at least 30 seconds. Apply even pressure across the entire adhesive surface.
5. Allow Adhesion Time: For optimal adhesion, allow the hanger to set for a recommended period (e.g., 24 hours) before hanging any object. This allows the adhesive to fully bond with the wall surface.

5. Operating Instructions

Once the hanger is securely installed and the adhesive has fully bonded:

1. Prepare Item: Ensure the item you wish to hang has a suitable hanging mechanism (e.g., wire, D-ring, or another eyelet) that can engage with the OOK hanger's eyelet.
2. Hang Item: Carefully lift your picture or object and place its hanging mechanism onto the eyelet of the OOK hanger.
3. Verify Stability: Gently test the stability of the hung item to ensure it is securely seated on the hanger and the hanger remains firmly attached to the wall.

Remember not to exceed the 5-pound weight limit for each hanger.

6. Maintenance

OOK 50085 Eyelet Picture Hangers require minimal maintenance. To ensure continued performance:

• Periodically check the hanger and the hung item to ensure the adhesive bond is still strong and the item is securely in place.
• If the hanger shows signs of loosening or damage, remove the item and replace the hanger with a new one. Do not attempt to re-use a hanger that has lost its adhesive strength.
• Clean the hanger with a dry, soft cloth if necessary. Avoid using harsh chemicals.

7. Troubleshooting

• Item falls off the wall:
  • Ensure the weight of the item does not exceed 5 pounds.
  • Verify that the wall surface was clean and dry before installation.
  • Confirm sufficient adhesion time was allowed before hanging the item.
  • Ensure the hanger was pressed firmly against the wall during installation.
  • If the hanger is damaged or the adhesive has failed, replace it with a new one.
• Hanger does not stick to the wall:
  • Check if the surface is suitable (Concrete, Drywall, Wood).
  • Ensure the surface is clean, dry, and smooth.
  • Apply firm, even pressure during installation.
  • Avoid touching the adhesive surface with fingers before application.

8. Specifications

9. Warranty and Support

Warranty information for the OOK 50085 Eyelet Picture Hangers is not provided in the available product data. For specific warranty details or customer support, please refer to the product packaging or contact the manufacturer, Hillman Group Rsc, directly.

Manufacturer: Hillman Group Rsc