METAFORM 59288002
METAFORM LINEA White Coat Hanger Instruction Manual
Model: 59288002 | Brand: METAFORM
Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your METAFORM LINEA White Coat Hanger. Please read this manual carefully before installation and retain it for future reference.
Product Overview
Figure 1: METAFORM LINEA White Coat Hanger. This image shows the METAFORM LINEA coat hanger, a white, rectangular-shaped unit designed for wall mounting. It features two rounded hooks extending downwards, providing space for hanging items.
Setup and Installation
The METAFORM LINEA coat hanger is designed for wall mounting. Proper installation is crucial for stability and safety.
Tools Required:
- Drill
- Drill bits appropriate for wall material (e.g., masonry, wood)
- Pencil
- Measuring tape
- Level
- Screwdriver (if screws are included or required)
- Wall plugs/anchors (if not included, and required for your wall type)
Installation Steps:
- Choose Location: Select a suitable wall location, ensuring it is free from electrical wires or water pipes.
- Mark Drilling Points: Hold the coat hanger against the wall at the desired height. Use a pencil to mark the positions for the mounting holes. Use a level to ensure the marks are perfectly horizontal.
- Drill Holes: Using the appropriate drill bit for your wall type, drill holes at the marked points. Ensure the depth is sufficient for the wall plugs/anchors.
- Insert Wall Plugs: Insert wall plugs or anchors into the drilled holes.
- Mount Hanger: Align the coat hanger with the installed wall plugs. Insert screws through the hanger's mounting holes and into the wall plugs.
- Secure Hanger: Tighten the screws firmly until the coat hanger is securely fastened to the wall. Do not overtighten.
- Test Stability: Gently pull on the installed hanger to ensure it is stable and properly secured before hanging items.
Operating Instructions
The METAFORM LINEA coat hanger is designed for simple and effective use.
- Hanging Items: Use the two integrated hooks to hang coats, jackets, hats, scarves, or other lightweight garments and accessories.
- Weight Capacity: While the hanger is wear-resistant, avoid overloading it with excessively heavy items to prevent damage to the hanger or the wall.
Maintenance and Care
To ensure the longevity and appearance of your METAFORM LINEA coat hanger, follow these simple maintenance guidelines:
- Cleaning: Wipe the surface with a soft, damp cloth. For stubborn marks, a mild, non-abrasive cleaner can be used, followed by wiping with a clean, dry cloth.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Regular Inspection: Periodically check the mounting screws to ensure they remain tight. Retighten if necessary.
- Wear Resistance: The product is designed to be wear-resistant, ensuring durability under normal use.
Troubleshooting
Most issues with a coat hanger are related to installation. If you encounter problems, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hanger feels loose or wobbly after installation. | Screws are not tight enough, or wall plugs are not properly seated/compatible with wall material. | Retighten screws. If still loose, consider using different wall plugs/anchors suitable for your wall type. Ensure holes are not oversized. |
| Hanger falls off the wall. | Improper installation, overloaded, or wall material cannot support weight. | Re-install following all steps carefully. Use appropriate wall anchors for the load and wall type. Do not exceed recommended weight capacity. |
| Surface appears dull or stained. | Accumulation of dirt or use of inappropriate cleaning agents. | Clean with a soft, damp cloth and mild soap. Avoid abrasive cleaners. |
Specifications
| Brand | METAFORM |
| Model Number | 59288002 |
| Color | White |
| Material | Leather (Note: This might be a data error, as coat hangers are typically not made of leather. Assuming it refers to a durable synthetic material or a misclassification in the source data. User should verify product material.) |
| Mounting Type | Wall Mount |
| Style | Classic |
| Dimensions (Package) | 20 x 20 x 20 cm |
| Item Weight | 500 grams |
| Special Features | Wear-resistant |
| Number of Items | 1 |
| ASIN | B00FEJMM58 |
Warranty and Support
Specific warranty details are not provided in the product information. For any questions regarding product defects, installation assistance, or general inquiries, please contact the manufacturer, METAFORM, or your point of purchase.
Please refer to the seller's return policy for information on returns or exchanges.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.