Saxby Lighting Atlantis Outdoor Wall Lamp User Manual

1. Introduction

Thank you for purchasing the Saxby Lighting Atlantis Outdoor Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

The Atlantis wall lamp is a durable, marine-grade fixture designed for outdoor use, featuring a brushed stainless steel finish and clear glass. It provides both up and down lighting, making it ideal for illuminating entrances, pathways, and garden areas.

Figure 1: Front view of the Saxby Lighting Atlantis Outdoor Wall Lamp.

2. Safety Information

WARNING: Electrical installation should only be carried out by a qualified electrician in accordance with all local and national wiring regulations.

• Always switch off the electricity supply at the mains before commencing any work.
• Ensure the product is securely mounted to a suitable surface.
• This product is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is suitable for outdoor use, including coastal areas.
• Do not connect this fitting to an earth wire if your supply does not have one.
• Use only GU10 LED bulbs as specified.
• Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities.

3. Package Contents

Please check the contents of the box carefully to ensure all parts are present and undamaged.

• 1 x Atlantis Outdoor Wall Lamp Fixture
• Mounting Hardware (screws, wall plugs)
• Instruction Manual

Note: GU10 bulbs are not included and must be purchased separately.

4. Setup and Installation

Follow these general steps for installation. For detailed wiring, consult a qualified electrician.

1. Preparation: Ensure the electricity supply is switched off at the fuse board. Choose a suitable mounting location on an exterior wall, ensuring it is structurally sound.
2. Mounting: Mark the drilling points for the mounting bracket. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the wall using the provided screws.
3. Wiring: Connect the mains electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth if applicable). Refer to the wiring diagram provided with the product packaging for specific connections.
4. Secure Fixture: Attach the main lamp body to the mounting bracket, ensuring all connections are secure and the fixture is firmly in place.
5. Install Bulbs: Insert two GU10 LED bulbs (max 7W each) into the lamp holders.
6. Test: Restore power at the mains and test the lamp's functionality.

Figure 2: Atlantis wall lamps installed on a house exterior, providing up and down illumination.

Figure 3: Close-up of the installed lamp showing light output.

5. Operating Instructions

The Saxby Lighting Atlantis wall lamp operates via your standard household light switch. Once installed and wired correctly, simply use the wall switch to turn the light on or off.

This fixture is designed to be dimmable when paired with compatible dimmable GU10 LED bulbs and a suitable dimmer switch. If you wish to utilize the dimming function, ensure both your bulbs and switch are rated for dimming.

Figure 4: The Atlantis lamp is dimmable with compatible bulbs and switches.

6. Maintenance

To ensure the longevity and appearance of your Atlantis wall lamp, follow these maintenance guidelines:

• Cleaning: Regularly wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the brushed stainless steel finish and glass.
• Bulb Replacement: Before replacing bulbs, ensure the power supply to the fixture is switched off at the mains. Allow bulbs to cool completely before handling. Twist the GU10 bulb counter-clockwise to remove and clockwise to insert a new one. Use only GU10 LED bulbs, maximum 7W.
• Inspection: Periodically check the fixture for any signs of wear, damage, or loose connections. If any issues are found, consult a qualified electrician.

7. Troubleshooting

If you encounter issues with your Atlantis wall lamp, refer to the following common problems and solutions:

• Light Does Not Turn On:
  • Check if the mains power supply is on.
  • Ensure the light switch is in the 'ON' position.
  • Verify that the bulbs are correctly inserted and not faulty. Try replacing them with known working bulbs.
  • Check wiring connections (only by a qualified electrician).
• Light Flickers or Dims Incorrectly:
  • Ensure you are using dimmable GU10 LED bulbs.
  • Verify that your dimmer switch is compatible with LED lighting.
  • Check for loose connections (only by a qualified electrician).
• Water Inside Fixture:
  • Although IP65 rated, improper installation or damage can compromise the seal. Immediately switch off power and consult a qualified electrician for inspection and repair.

If the problem persists after attempting these solutions, please contact Saxby Lighting customer support or a qualified electrician.

8. Specifications

Figure 5: Dimensions and material specifications.

Figure 6: The IP65 rating ensures suitability for various outdoor environments.

9. Warranty and Support

This product comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Saxby Lighting website for detailed warranty terms and conditions.

For technical support, replacement parts, or any inquiries regarding your Atlantis wall lamp, please contact Saxby Lighting customer service through their official channels. When contacting support, please have your model number (14015) and purchase details ready.

For more information, visit: www.saxbylighting.com