Introduction
This manual provides instructions for the safe and effective use of your Tripp Lite P004-005-13A Computer Power Extension Cord. This 5-foot power cord is designed to extend the reach of power connections for various computer equipment and devices. It features an IEC-320-C14 male connector on one end and an IEC-320-C13 female connector on the other, allowing for versatile connectivity to power distribution units (PDUs), uninterruptible power supplies (UPS), and other compatible devices.
Product Features
- Length: 5-foot (1.52 meters) power extension cord.
- Connectors: IEC-320-C14 (male) to IEC-320-C13 (female).
- Gauge: 16AWG (American Wire Gauge) for reliable power delivery.
- Rating: 13 Amps, 100-250 Volts.
- Safety: UL listed for safety and quality assurance.
- Application: Ideal for extending power cords on PCs or devices with a C14 plug, or connecting C14 devices directly to C13 ports on PDUs or UPS systems.
Image showing the Tripp Lite P004-005-13A power extension cord, featuring a male IEC-320-C14 connector on one end and a female IEC-320-C13 connector on the other.
Setup
- Identify Connectors: Locate the IEC-320-C14 (male) connector on your device or existing power cord and the IEC-320-C13 (female) port on your power source (e.g., PDU, UPS, or another power cord).
- Connect Male End: Insert the IEC-320-C14 male end of the Tripp Lite P004-005-13A extension cord into the C13 female port of your power source. Ensure a firm and secure connection.
- Connect Female End: Insert the IEC-320-C13 female end of the extension cord onto the C14 male connector of your device or its power cord. Ensure a firm and secure connection.
- Verify Connection: Gently tug on both ends of the cord to ensure they are properly seated and will not accidentally disconnect.
Safety Note: Always ensure that the power source is disconnected or turned off before making or breaking any power connections to prevent electrical shock or damage to equipment.
Operating
Once properly connected, the Tripp Lite P004-005-13A power extension cord functions as a direct extension or connection for your electrical devices. It is designed for continuous operation within its specified voltage and current ratings. No user interaction is required during operation beyond ensuring secure connections.
- Important: Do not exceed the maximum current rating of 13 Amps or voltage rating of 250 Volts. Overloading the cord can lead to overheating, fire, or equipment damage.
- Important: Ensure the cord is not pinched, bent sharply, or placed under heavy objects, as this can damage the internal wiring.
Maintenance
The Tripp Lite P004-005-13A power extension cord requires minimal maintenance. Follow these guidelines to ensure its longevity and safe operation:
- Regular Inspection: Periodically inspect the cord for any signs of damage, such as cuts, fraying, exposed wires, or discolored insulation. Also check the connectors for bends, corrosion, or loose pins.
- Cleaning: If necessary, gently wipe the cord and connectors with a dry, soft cloth. Do not use liquid cleaners or immerse the cord in water. Ensure the cord is unplugged from all power sources before cleaning.
- Storage: When not in use, store the cord in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cord, which can stress the internal wires.
- Replacement: If any damage is observed, discontinue use immediately and replace the cord with a new, compatible one. Do not attempt to repair damaged power cords.
Troubleshooting
If you experience issues with your power extension cord, consider the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to device | Loose connection | Ensure both ends of the cord are securely plugged into the power source and the device. |
| No power to device | Power source issue | Check if the power source (PDU, UPS, wall outlet) is functioning correctly. Test with another device or power cord if possible. |
| No power to device | Damaged cord | Inspect the cord for visible damage. If damaged, discontinue use and replace. |
| Cord feels warm | Overload or poor ventilation | Ensure the connected device's power draw does not exceed the cord's 13A rating. Ensure the cord is not covered or in an area with poor airflow. Disconnect immediately if excessively hot. |
If troubleshooting steps do not resolve the issue, contact Tripp Lite customer support for further assistance.
Specifications
| Model Number | P004-005-13A |
| Cord Length | 5 feet (60 inches) |
| Connectors | IEC-320-C14 (Male) to IEC-320-C13 (Female) |
| Wire Gauge | 16 AWG |
| Current Rating | 13 Amps |
| Voltage Rating | 100-250 Volts |
| Wattage | 3250 Watts (Max) |
| Color | Black |
| UL Listed | Yes |
| Material | Plastic or Rubber |
| Item Weight | 9.07 g |
Warranty Information
This Tripp Lite P004-005-13A power extension cord is covered by a Limited Lifetime Product Warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to make a warranty claim, please refer to the official Tripp Lite website or contact their customer support.
Proof of purchase may be required for warranty service.
Customer Support
For technical assistance, product information, or warranty inquiries, please contact Tripp Lite customer support:
- Website: www.tripplite.com
- Phone: Refer to the Tripp Lite website for regional contact numbers.
- Email: Refer to the Tripp Lite website for support email addresses.
When contacting support, please have your product model number (P004-005-13A) and proof of purchase readily available.