1. Introduction
This instruction manual provides detailed information for the installation, operation, and maintenance of your Urmet Atlantico Bibus Intercom, Model 1172/42. This device is designed to provide reliable audio communication and door release functionality for residential and commercial applications. Please read this manual thoroughly before attempting any installation or operation.
2. Product Overview and Features
The Urmet Atlantico Bibus Intercom is a robust and user-friendly indoor station for your intercom system. Key features include:
- Adjustable Volume: Allows users to set the desired audio level for incoming calls.
- Door Release Button: Dedicated button for convenient electric lock release.
- Clear Audio Communication: Ensures crisp and clear two-way communication with the outdoor unit.
- Durable Construction: Designed for long-lasting performance.
Figure 1: Front view of the Urmet Atlantico Bibus Intercom unit. The white unit features a handset, a key-shaped door release button, and three circular control buttons below it. A coiled cord connects the handset to the base.
3. Setup and Installation
Installation should be performed by a qualified technician to ensure proper functionality and safety. Always disconnect power to the system before beginning installation.
3.1 Mounting the Intercom Unit
- Choose a suitable indoor location, typically near the entrance, at an accessible height.
- Mark the drilling points on the wall using the mounting template (if provided) or by holding the unit in place.
- Drill holes and insert appropriate wall plugs.
- Secure the mounting bracket (if separate) or the unit directly to the wall using screws.
3.2 Wiring Connections
Refer to the specific wiring diagram provided with your complete intercom system for precise connections. The Atlantico Bibus intercom uses a 2-wire (Bibus) system for communication and power. Ensure correct polarity and secure all connections.
- Connect the Bibus communication wires to the designated terminals on the intercom unit.
- Connect the door release wires to the appropriate terminals for the electric lock.
- Ensure all wires are properly insulated and secured to prevent short circuits.
3.3 Initial Power-Up
Once all connections are made, restore power to the intercom system. The unit should power on, and you may hear a confirmation tone or see an indicator light.
4. Operating Instructions
4.1 Answering a Call
When a visitor presses the call button on the outdoor unit, your Atlantico Bibus intercom will ring. To answer the call:
- Lift the handset from its cradle.
- Speak into the microphone and listen through the earpiece to communicate with the visitor.
- To end the call, replace the handset in its cradle.
4.2 Opening the Door/Gate
To open the electric lock for a visitor:
- During an active call, press the dedicated door release button (often marked with a key symbol).
- You may hear a click or buzz indicating the lock has been momentarily released.
4.3 Adjusting Volume
The Atlantico Bibus intercom features adjustable volume. Locate the volume control (typically a slider or rotary knob on the side or bottom of the unit) and adjust it to your preferred listening level.
5. Maintenance
The Urmet Atlantico Bibus Intercom requires minimal maintenance to ensure optimal performance.
- Cleaning: Wipe the unit regularly with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the surface.
- Inspection: Periodically check the handset cord for any signs of wear or damage. If damaged, contact a qualified technician for replacement.
- Environment: Ensure the unit is kept in a dry environment, away from direct sunlight, excessive heat, or moisture.
6. Troubleshooting
If you experience issues with your intercom, refer to the following common problems and solutions. For complex issues, contact a qualified technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from intercom (no ring, no voice) |
|
|
| Door release not working |
|
|
| Distorted or unclear audio |
|
|
7. Specifications
| Attribute | Value |
|---|---|
| Manufacturer | URMET |
| Model Number | 1172/42 |
| Package Dimensions | 25 x 10 x 7 cm (9.84 x 3.94 x 2.76 inches) |
| Weight | 200 kg (440.92 lbs) (Note: This weight may refer to shipping weight for bulk, or could be a data entry error for a single unit.) |
| Batteries Included | No |
| Batteries Required | No |
| Discontinued by Manufacturer | No |
| Spare Parts Availability | Information unavailable on spare parts |
| Date First Available on Amazon.com.be | 24 July 2022 |
8. Warranty and Support
Specific warranty information for the Urmet Atlantico Bibus Intercom (Model 1172/42) is not provided in the available product data. Please refer to the documentation included with your purchase or contact Urmet directly for warranty details and technical support.
For further assistance, please visit the official Urmet website or contact their customer service department.
