Introduction
Thank you for choosing the Mr. Coffee Flintshire 1.75-Quart Stainless Steel Whistling Tea Kettle. This manual provides important information for the safe and efficient use, maintenance, and care of your new tea kettle. Please read all instructions carefully before first use and retain for future reference.
Image: Mr. Coffee Flintshire 1.75-Quart Stainless Steel Whistling Tea Kettle with brushed satin finish.
Setup
- Unpacking: Carefully remove the tea kettle and all packaging materials. Inspect the kettle for any signs of damage.
- Initial Cleaning: Before first use, wash the inside of the kettle with warm, soapy water. Rinse thoroughly with clean water.
- Filling: Remove the lid by lifting the handle. Fill the kettle with fresh water. Do not overfill; fill no higher than just the spout opening to prevent boiling over. The kettle has a 1.75-quart capacity.
- Lid Placement: Securely place the lid back on the kettle.
Image: Mr. Coffee Flintshire Tea Kettle with its lid removed, showing the wide opening for easy filling.
Operating
- Placement: Place the filled tea kettle on a stovetop burner. Ensure the kettle is centered on the burner.
- Heating: Turn the burner to a medium-high setting. Avoid using excessively high heat, which can damage the kettle's finish or handle.
- Whistling Feature: The whistling teakettle alerts you when water is boiling. For safety, it is recommended to move the kettle from the heat source after the whistle has been blown.
- Pouring: The kettle features a flip-up spout cover for safe and easy pouring. Use the Bakelite stay-cool handle and trigger to open the spout.
Image: Mr. Coffee Flintshire Tea Kettle placed on a gas stove burner with a blue flame.
Video: Demonstrates the flip-up spout feature of the Mr. Coffee Flintshire Whistling Tea Kettle for easy pouring.
Maintenance
- Cleaning: Hand wash is recommended for this tea kettle. Use warm, soapy water and a soft cloth or sponge. Avoid abrasive cleaners or scouring pads that could scratch the brushed satin finish.
- Drying: Thoroughly dry the kettle after each use to prevent water spots and potential mineral buildup.
- Descaling: Over time, mineral deposits (limescale) may build up inside the kettle, especially in hard water areas. To descale, fill the kettle with a solution of equal parts water and white vinegar. Bring to a boil, then let it sit for 15-30 minutes. Empty and rinse thoroughly. Repeat if necessary.
Video: Shows the Mr. Coffee Flintshire Whistling Tea Kettle and highlights its easy-to-clean design.
Troubleshooting
- Whistle is not loud enough: Ensure the lid is securely closed and the spout cover is fully engaged. A loose lid or partially open spout can reduce whistle volume.
- Rusting or Discoloration: While made of stainless steel, prolonged exposure to moisture or certain minerals can cause discoloration or surface rust. Always dry the kettle thoroughly after use. For existing spots, try a stainless steel cleaner or a paste of baking soda and water.
- Handle gets hot: The kettle is designed with a Bakelite stay-cool handle. However, prolonged exposure to high heat, especially if flames extend up the sides of the kettle, can cause the handle to heat up. Always use a medium-high heat setting and ensure the flame does not extend beyond the base of the kettle. Use oven mitts if necessary.
- Water boils over: Ensure the kettle is not overfilled. Water should be filled no higher than the spout opening.
Specifications
| Feature | Detail |
|---|---|
| Brand | Mr. Coffee |
| Model Number | 91407.02 |
| Capacity | 1.75 Quarts (1.8 Quarts listed as Size) |
| Material | Stainless Steel (Kettle), Nylon (Handle) |
| Color | Brushed Satin |
| Product Dimensions (D x W x H) | 8.75"D x 8"W x 8.5"H |
| Whistling Feature | Yes |
| Dishwasher Safe | No (Hand wash recommended) |
Warranty
This product is covered by the manufacturer's standard warranty. Please refer to the warranty card included with your purchase or visit the official Mr. Coffee website for detailed information regarding warranty terms and conditions.
Support
For customer support, product inquiries, or to purchase replacement parts, please visit the official Mr. Coffee website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's official website.
