FilterQueen Majestic Premium Replacement Filter Kit Instruction Manual

Introduction

This manual provides essential instructions for the proper installation, operation, and maintenance of your FilterQueen Majestic Premium Replacement Filter Kit. This kit is designed to maintain the optimal performance and filtration efficiency of your FilterQueen Majestic Surface Cleaner. Please read these instructions carefully before use to ensure safe and effective operation.

Product Overview

The FilterQueen Majestic Premium Replacement Filter Kit is a 6-month supply designed for all FilterQueen Majestic Surface Cleaners. It includes the following genuine components:

• 6 Primary Filter BioCones: These are the main filtration components, designed for regular replacement.
• 1 Premium Medipure Cone: This specialized filter provides enhanced odor control and advanced filtration for allergens, pollen, and pet dander.
• 1 Motor Guard Filter: Protects the motor from debris, ensuring longevity of your unit.

This image displays the complete FilterQueen Majestic Premium Replacement Filter Kit components, including BioCones, a Medipure cone, and a motor guard filter.

A close-up view of the individual filter components: the BioCone, the Medipure cone, and the motor guard filter, positioned next to a FilterQueen Majestic surface cleaner.

Setup Instructions

To ensure proper function and to protect your FilterQueen Majestic unit, always use genuine FilterQueen filters. Using non-genuine filters may void your warranty and potentially damage your unit.

Replacing the Primary Filter BioCone:

1. Ensure your FilterQueen Majestic unit is unplugged from the power outlet.
2. Open the unit to access the filter compartment. Refer to your Majestic Surface Cleaner's user manual for specific instructions on opening the unit.
3. Carefully remove the used BioCone filter. Dispose of it properly.
4. Unfold a new Primary Filter BioCone. Ensure the three small tabs are aligned correctly with the corresponding slots in the filter housing.
5. Insert the new BioCone firmly into place.
6. Close the unit securely.

A detailed view of a single FilterQueen BioCone filter, highlighting its construction and the 'Genuine FilterQueen Product' seal.

Replacing the Medipure Cone and Motor Guard Filter:

1. Follow steps 1 and 2 from the BioCone replacement instructions.
2. Locate the Medipure cone and motor guard filter. These are typically found beneath the primary BioCone or in a designated compartment.
3. Remove the old Medipure cone and motor guard filter.
4. Place the new Medipure cone and motor guard filter into their respective positions. Ensure they are seated correctly to prevent air leakage.
5. Close the unit securely.

A detailed view of a single FilterQueen Medipure filter cone, designed for odor control and advanced filtration.

Operating Instructions

After replacing the filters, your FilterQueen Majestic Surface Cleaner is ready for operation. Always ensure all filters are correctly installed and the unit is properly assembled before turning it on.

• Plug the unit into a suitable power outlet.
• Turn on the unit using the power switch.
• The cyclonic action of the FilterQueen Majestic, combined with the BioCone and Medipure filters, will effectively capture dirt, dust, and allergens, releasing clean air.

This diagram illustrates the bagless cyclonic action of the FilterQueen Majestic, showing how air is drawn in and filtered through the BioCone and Medipure filters.

Maintenance

Regular filter replacement is crucial for maintaining the performance and longevity of your FilterQueen Majestic unit. Adhere to the following schedule:

• Primary Filter BioCones: Change every month for best performance.
• Medipure Cone: Replace every 6 months.
• Motor Guard Filter: Replace every 6 months.

Always use genuine FilterQueen replacement parts to ensure optimal filtration and to protect your unit's warranty.

Troubleshooting

If you experience issues with your FilterQueen Majestic after filter replacement, consider the following:

• Reduced Suction: Check if the filters are correctly seated. Ensure no gaps allow air to bypass the filters. A clogged filter can also reduce suction; replace if necessary.
• Unusual Odors: Replace the Medipure cone if persistent odors are detected, as it is designed for odor control.
• Unit Not Turning On: Verify the unit is properly plugged in. Check if the power switch is functioning. Ensure all compartments are securely closed, as some units have safety interlocks.

For further assistance, please contact Filter Queen customer support.

Specifications

Warranty and Support

This FilterQueen product includes Health-Mor's Manufacturer Warranty, Guarantee & Benefits. For specific warranty details, claims, or technical support, please refer to the documentation provided with your original FilterQueen Majestic unit or contact Health-Mor directly.

Contact Information:

• Email: service@filterqueen.com
• Website: www.filterqueen.com

The Health-Mor manufacturing facility in Brooklyn, Ohio, where genuine FilterQueen products are made.