Adams Rite eForce-150 Keyless Entry Electric Lock User Manual

1. Introduction

The Adams Rite eForce-150 is a sophisticated, battery-operated keyless entry control system designed for enhanced security and convenience. It is compatible with Adams Rite deadbolts, dead latches, and exit devices, making it suitable for various door applications including aluminum stile, steel, and wood doors. This manual provides essential information for the proper setup, operation, and maintenance of your eForce-150 lock.

2. Safety Information

Please read and understand all safety instructions before installing or operating the eForce-150 lock. Failure to follow these instructions may result in damage to the product, property, or personal injury.

• Ensure all power sources are disconnected before installation or maintenance.
• Use only the specified battery type and replace all batteries simultaneously.
• Do not expose the lock to extreme temperatures or moisture.
• Keep programming codes confidential and change them regularly.
• Professional installation is recommended to ensure proper functionality and security.

3. Product Features

The Adams Rite eForce-150 offers a range of features designed for robust and flexible access control:

• User Capacity: Supports up to 150 unique users, including master, supervisor, and emergency users, plus two one-time codes.
• Operating Modes: Functions in three distinct modes: Standard, Passage, and Lockout.
• Keypad Programming: All programming and code management are performed directly via the integrated keypad.
• Feedback Indicators: Device operation is confirmed by both a visual LED light indicator and an audible sound from a piezo horn.
• Adjustable Hold Open Time: The duration the door remains unlocked after a valid entry can be adjusted from 1 to 9 seconds.
• Mechanical Key Override: Features a mortise cylinder for traditional key access (cylinder by others).
• Remote Activation: Achievable with an optional cable kit for hard-wired switch integration.
• Vandalism Prevention: Equipped with a free-wheeling lever and clutch mechanism.
• Installation: Surface mounted design with concealed fasteners for a clean appearance.
• Handing: Field selectable handing for versatile installation.

Image: Adams Rite eForce-150 Keyless Entry Electric Lock, showing the keypad, lever, and key cylinder on a satin chrome finish.

4. Setup and Installation

The eForce-150 is designed for surface mounting with concealed fasteners. It is compatible with various Adams Rite door hardware. For detailed, step-by-step installation instructions, please refer to the comprehensive installation guide included with your product or consult a qualified locksmith or installer.

4.1. Pre-Installation Considerations

• Verify door type and compatibility with existing Adams Rite hardware.
• Ensure proper handing (left or right) is selected before final installation.
• Prepare the door for surface mounting, ensuring all necessary wiring (if using remote activation kit) is in place.

4.2. Initial Programming

Upon initial power-up, the lock will require programming of a master code. This master code is essential for adding, deleting, and managing user codes, as well as configuring lock settings. Refer to the full programming manual for detailed steps on setting up the master code and subsequent user codes.

5. Operating Instructions

5.1. Standard Mode Operation

In Standard mode, the lock requires a valid user code for each entry. To unlock:

1. Enter your programmed 2 to 7 digit user code on the keypad.
2. Press the * (star) key.
3. The lock will emit an audible sound and the LED will illuminate, indicating successful code entry.
4. Turn the lever to open the door. The lock will automatically re-lock after the adjustable hold open time expires.

5.2. Passage Mode

Passage mode allows the door to remain unlocked for continuous access without requiring a code. This mode is typically activated and deactivated via a specific master or supervisor code sequence on the keypad. Consult your full manual for instructions on enabling and disabling Passage mode.

5.3. Lockout Mode

Lockout mode disables all user code access, allowing entry only via mechanical key override or specific emergency codes. This mode is used for enhanced security when access needs to be restricted. Activation and deactivation procedures are detailed in the comprehensive programming manual.

6. Maintenance

6.1. Battery Replacement

The eForce-150 is battery-operated. When the batteries are low, the lock will provide an indication (e.g., specific LED flash pattern or audible alert). Replace all batteries simultaneously with new, high-quality alkaline batteries of the specified type. Refer to the installation guide for instructions on accessing the battery compartment.

6.2. Cleaning

Clean the exterior of the lock with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components. Avoid spraying liquids directly onto the keypad or lock mechanism.

6.3. General Care

Periodically check the mounting screws for tightness. Ensure the door and frame are properly aligned to prevent undue stress on the lock mechanism. The free-wheeling lever is designed to prevent vandalism and should not require lubrication.

7. Troubleshooting

This section addresses common issues you might encounter with your eForce-150 lock. For more complex problems, consult the full product manual or contact Adams Rite technical support.

8. Specifications

9. Warranty and Support

For specific warranty information regarding your Adams Rite eForce-150 lock, please refer to the warranty documentation provided at the time of purchase. Warranty terms and conditions may vary.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Adams Rite customer support. Contact details are typically available on the manufacturer's official website or in the product packaging.