Chamberlain 128REV

Chamberlain 128REV Wireless Wall Button User Manual

Model: 128REV

1. Introduction

Thank you for choosing the Chamberlain 128REV Wireless Wall Button. This device is designed to provide convenient, wireless control for up to two separate garage door or gate openers from inside your garage. Its two-channel functionality allows for versatile operation without the need for complex wiring.

Chamberlain 128REV Wireless Wall Button, front view

Image: Front view of the Chamberlain 128REV Wireless Wall Button.

2. Product Overview

2.1 Components

  • Chamberlain 128REV Wireless Wall Button
  • 1 x Lithium Ion Battery (pre-installed or included)
  • Fastening Screws (for mounting)

2.2 Features

  • Wireless wall transmitter for convenient indoor use.
  • Two-channel operation to control up to two separate garage doors or gates.
  • Operates on 433 MHz frequency.
  • Surface-mounted design for easy installation.
  • No wiring necessary, simplifying installation.
  • Compatible with a wide range of Chamberlain Evolution series garage door openers including ML510EV, ML700EV, ML1000EV, ML550EV, ML800EV, ML800EV-SMART, ML1000EV-S, ML1000EV-F, ML580EV, ML810EV, ML1040EV, ML810EV-SMART, ML1040EV-SMART.
  • Also compatible with Chamberlain gate openers: CHLA250EVC, CHAA250EVC, CHSL400EVC.
Back of Chamberlain 128REV packaging showing compatibility and features

Image: Back of the product packaging detailing compatibility and features.

3. Setup

3.1 Battery Installation

The Chamberlain 128REV typically comes with a Lithium Ion battery pre-installed. If not, or if replacement is needed, carefully open the battery compartment (usually on the back or side) and insert the 3V Lithium Ion battery, ensuring correct polarity.

3.2 Mounting the Wall Button

Choose a convenient indoor location within range of your garage door or gate opener. Use the provided fastening screws to securely mount the wall button to a flat surface. Since it is wireless, no electrical wiring is required.

3.3 Programming the Wall Button

To program the wall button to your opener, follow the specific programming instructions for your Chamberlain garage door or gate opener model. Generally, this involves:

  1. Locating the 'Learn' button on your opener's motor unit.
  2. Pressing and releasing the 'Learn' button. The LED indicator on the opener will illuminate.
  3. Within 30 seconds, press and hold the desired button on your 128REV wall button until the opener's light flashes or you hear a click, indicating successful programming.
  4. Repeat the process for the second channel if you wish to control another opener.

Refer to your opener's manual for detailed programming steps, as procedures may vary slightly between models.

4. Operating Instructions

Once programmed, operating the Chamberlain 128REV Wireless Wall Button is straightforward:

  • To open or close the first programmed garage door/gate, press the upper button.
  • To open or close the second programmed garage door/gate, press the lower button.

The button sends a signal to your opener, initiating the open or close cycle. Ensure the path of the door/gate is clear before activation.

Person pressing the Chamberlain 128REV Wireless Wall Button

Image: A user demonstrating the operation of the wall button.

5. Maintenance

The Chamberlain 128REV Wireless Wall Button requires minimal maintenance.

  • Battery Replacement: When the button's range decreases or it becomes unresponsive, it may be time to replace the 3V Lithium Ion battery. Refer to section 3.1 for battery installation.
  • Cleaning: Wipe the surface of the button with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.

6. Troubleshooting

If you encounter issues with your Chamberlain 128REV Wireless Wall Button, consider the following:

ProblemPossible CauseSolution
Button does not activate opener.Low or dead battery.
Button not programmed correctly.
Out of range.
Replace battery.
Reprogram the button (see Section 3.3).
Move closer to the opener's motor unit.
Reduced operating range.Low battery.
Interference from other devices.
Replace battery.
Identify and remove sources of interference (e.g., other wireless devices).
Button activates wrong opener.Incorrect programming.Clear all codes from the opener and reprogram the button (see Section 3.3).

7. Specifications

AttributeValue
ManufacturerChamberlain
Model Number128REV
Part Number128REV
Item Weight10 grams
Product Dimensions19.5 x 8.5 x 4.5 cm
Battery Type1 x Lithium Ion (3V)
Batteries IncludedYes
Frequency433 MHz
Mounting TypeSurface Mounted

8. Warranty and Support

For detailed warranty information and customer support, please visit the official Chamberlain website. You can find comprehensive resources, FAQs, and contact information there.

Visit Chamberlain Official Website

For any technical assistance or inquiries not covered in this manual, please contact Chamberlain customer service.

Related Documents - 128REV

PreviewChamberlain LED Belt Drive Garage Door Opener Installation Manual
Comprehensive installation guide for Chamberlain LED Belt Drive Garage Door Openers, covering models B4603TC, B4643TC, B4613TC, B6713TC, and B6753TC. Includes operation, maintenance, troubleshooting, and warranty information.
PreviewChamberlain RJO101 Wall Mount Wi-Fi Garage Door Opener Manual
Comprehensive guide for the Chamberlain RJO101 Wall Mount Wi-Fi Garage Door Opener. Learn about installation, setup, programming, safety features, and troubleshooting for residential use. Compatible with myQ and Security+ 2.0 accessories.
PreviewChamberlain Wi-Fi Garage Door Opener User's Guide
Comprehensive user's guide for Chamberlain Wi-Fi Chain Drive and Belt Drive Garage Door Openers, covering installation, programming, operation, safety, maintenance, and troubleshooting for models C2102, C2202T, C2212T, C2405T, D2101, D2405T, B2202T, B2210T, B2211T, B2212T, B2215T, B2401T, B2405T, and B4505T.
PreviewChamberlain C870 Smart Garage Door Opener Owner's Manual
This owner's manual provides detailed instructions for the Chamberlain C870 Chain Drive Smart Garage Door Opener, covering installation, operation, maintenance, and troubleshooting. Features MyQ® compatibility and battery backup for residential use.
PreviewChamberlain C2102 Installation Manual - Easy Setup Guide
Comprehensive installation manual for the Chamberlain C2102 Chain Drive Garage Door Opener. Includes step-by-step instructions, safety warnings, and troubleshooting tips for a smooth setup.
PreviewChamberlain RJO101 Wall Mount Wi-Fi Garage Door Opener Manual
Comprehensive owner's manual and installation guide for the Chamberlain RJO101 Wall Mount Wi-Fi Garage Door Opener, covering setup, operation, maintenance, and troubleshooting.