Weiser Augusta Handleset User Manual

Product Overview

The Weiser Augusta GA9771A15B is a single cylinder sectional handleset outer trim package designed for residential and light commercial applications. This handleset features a satin nickel finish and includes the complete upper and lower outside trim components. It is engineered for durability and ease of installation, meeting ANSI Grade 2 rating requirements.

Image: Weiser Augusta Handleset in Satin Nickel. This image displays the complete outer trim assembly, including the upper deadbolt cylinder and the lower handleset with its curved lever, all in a satin nickel finish.

Setup and Installation

This section provides general guidelines for installing the Weiser Augusta Handleset. For detailed instructions, refer to the installation template included with your product. Professional installation is recommended if you are unfamiliar with door hardware installation.

Before You Begin:

• Ensure all components are present: upper and lower outside trim, adjustable backset latch, and strike plate.
• Verify door thickness and backset measurement. The adjustable backset latch supports 2 3/8 inches to 2 3/4 inches.
• Gather necessary tools: screwdriver, tape measure, pencil, drill (if new holes are required).

Installation Steps (General):

1. Prepare the door: Ensure existing holes are clean and correctly sized. If installing on a new door, mark and drill holes according to the provided template.
2. Install the latch: Insert the adjustable backset latch into the door edge. Ensure the latch bolt faces the correct direction for door swing. Secure with screws.
3. Install the strike plate: Attach the standard full lip strike plate to the door frame, aligning it with the latch bolt.
4. Assemble the handleset: Connect the upper and lower outside trim components to the interior mechanisms. Ensure proper alignment and secure all fasteners.
5. Test operation: Verify that the deadbolt and handleset operate smoothly and latch securely.

Operating Instructions

The Weiser Augusta Handleset is designed for straightforward operation.

Locking the Handleset:

• From the Exterior: Insert the key into the upper deadbolt cylinder and turn to extend the deadbolt. Remove the key.
• From the Interior: Rotate the thumbturn on the interior side of the deadbolt to extend the deadbolt.

Unlocking the Handleset:

• From the Exterior: Insert the key into the upper deadbolt cylinder and turn to retract the deadbolt.
• From the Interior: Rotate the thumbturn on the interior side of the deadbolt to retract the deadbolt.

Opening the Door:

Once unlocked, depress the handleset lever to retract the latch bolt and open the door.

Maintenance

Proper maintenance will ensure the longevity and smooth operation of your Weiser Augusta Handleset.

• Cleaning: Clean the satin nickel finish with a soft, damp cloth. Avoid abrasive cleaners, solvents, or polishing agents, as these can damage the finish.
• Lubrication: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and the latch mechanism to ensure smooth operation. Do not use oil-based lubricants as they can attract dust and debris.
• Fastener Check: Annually check all mounting screws and fasteners to ensure they are tight. Loose screws can affect the handleset's performance and security.
• Environmental Exposure: While designed for outdoor use, extreme weather conditions may require more frequent cleaning and inspection.

Troubleshooting

This section addresses common issues you might encounter with your handleset.

Specifications

Warranty and Support

Weiser products are manufactured to the highest standards of quality and durability. For specific warranty information and customer support, please refer to the documentation included with your purchase or visit the official Weiser website. Keep your proof of purchase for warranty claims.

For technical assistance or to inquire about replacement parts, please contact Weiser customer service directly. Contact information can typically be found on the manufacturer's website or on the product packaging.