Introduction
This manual provides essential instructions for the safe and efficient use of your ONKYO RC-1000M Audio Remote Control. Please read this manual thoroughly before using the product and retain it for future reference.

Image: The ONKYO RC-1000M Audio Remote Control, a black rectangular device with various control buttons.
Setup
1. Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch to open it.
- Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align with the indicators inside the compartment.
- Replace the battery compartment cover, ensuring it clicks securely into place.
Note: Always use new batteries and replace both batteries at the same time. Do not mix old and new batteries or different types of batteries.
2. Initial Pairing (If Applicable)
The ONKYO RC-1000M is typically pre-programmed for compatible ONKYO audio devices. No manual pairing is usually required. If the remote does not respond, ensure your audio device is powered on and within range. Refer to your ONKYO audio component's manual for specific remote control compatibility and setup instructions if issues persist.
Operating Instructions
The RC-1000M remote control provides comprehensive control over your ONKYO audio system. Point the remote control directly at the main unit's remote sensor.
- POWER: Press to turn the audio component on or off.
- INPUT SELECTOR: Use dedicated buttons (e.g., CD, TUNER, DVD) to switch between audio input sources.
- VOLUME +/-: Adjusts the master volume level.
- MUTE: Temporarily silences the audio output. Press again to restore sound.
- PLAY/PAUSE/STOP/SKIP: Control playback functions for compatible media players (e.g., CD player, network player).
- MENU/ENTER/NAVIGATION: Access and navigate on-screen menus of your ONKYO audio component.
For detailed functions of specific buttons, refer to the instruction manual of the ONKYO audio component you are controlling.
Maintenance
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid spraying liquids directly onto the remote control.
Battery Replacement
If the remote control's range decreases or it becomes unresponsive, replace the batteries as described in the "Battery Installation" section. Dispose of used batteries according to local regulations.
Storage
When storing the remote control for extended periods, remove the batteries to prevent leakage and potential damage to the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control does not operate. |
|
|
| Remote control operates intermittently. |
|
|
Specifications
- Model: RC-1000M
- Brand: ONKYO
- Power Supply: DC 3V (AAA batteries x 2)
- Operating Range: Approximately 7 meters (23 feet) under normal conditions.
- Dimensions (Approx.): Not specified in product data.
- Weight (Approx.): Not specified in product data.
Specifications are subject to change without notice for improvement.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation included with your ONKYO audio component or visit the official ONKYO website. Keep your purchase receipt as proof of purchase for warranty claims.
Official ONKYO Website: www.onkyo.com





