Rommelsbacher MS 650

Rommelsbacher MS 650 Milk Frother Instruction Manual

Model: MS 650

1. Introduction

Thank you for choosing the Rommelsbacher MS 650 Milk Frother. This appliance is designed to prepare perfect milk froth, hot milk, or various milk beverages with ease. Please read this instruction manual carefully before first use to ensure safe operation and optimal performance.

Key Features:

  • 6 Functions: Hot, cold, or warm frothing; hot, cold, or warm stirring.
  • Removable Glass Jug: Heat-resistant, perfect for serving, and easy to clean.
  • Electronic Heating: No pre-heating of milk required.
  • Easy Operation: Sensor button with illuminated display.
  • Automatic Switch-off: For safety and convenience.
  • Large Capacity: 300 ml for frothing, 400 ml for stirring.
  • Included Accessories: 3 removable stirring units (2 serrated whisks for frothing, 1 whisking disc for stirring).

2. Safety Instructions

Always observe the following safety precautions to prevent personal injury or damage to the appliance.

  • Read all instructions thoroughly before using the appliance.
  • Keep the appliance out of reach of children.
  • Do not immerse the base unit in water or other liquids. Only the glass jug and stirring units are washable.
  • Ensure the voltage indicated on the rating label matches your mains voltage.
  • Do not operate the appliance with a damaged cord or plug, or if it has been dropped or damaged in any way.
  • Place the appliance on a stable, heat-resistant, and dry surface.
  • Do not operate the appliance near hot surfaces or open flames.
  • Always unplug the appliance from the power outlet when not in use and before cleaning.
  • Avoid contact with moving parts.
  • Do not overfill the jug beyond the maximum fill lines to prevent overflow.
  • Use only original Rommelsbacher accessories and spare parts.

3. Setup and First Use

Before using your milk frother for the first time, follow these steps:

  1. Unpack: Carefully remove all packaging materials and check for any damage during transit. Keep packaging for future storage or disposal.
  2. Clean: Wash the glass jug, lid, and stirring units with warm soapy water. Rinse thoroughly and dry completely. Wipe the base unit with a damp cloth.
  3. Place Stirring Unit: Select the desired stirring unit (serrated whisk for frothing, whisking disc for stirring) and place it onto the pin at the bottom of the glass jug. The stirring units are magnetic and will securely attach.
  4. Position: Place the base unit on a flat, stable, and dry surface. Ensure the power cord is not tangled or obstructing.
  5. Connect Power: Plug the power cord into a suitable electrical outlet.
Rommelsbacher MS 650 Milk Frother assembled on a kitchen counter next to a cup of frothed coffee and a croissant.
Figure 1: The Rommelsbacher MS 650 Milk Frother ready for use.

4. Operating Instructions

The Rommelsbacher MS 650 offers versatile functions for various milk preparations.

General Operation:

  1. Ensure the desired stirring unit is correctly placed in the glass jug.
  2. Pour milk into the glass jug. Observe the maximum fill lines: 300 ml for frothing and 400 ml for stirring. Do not exceed these limits.
  3. Place the glass jug onto the base unit and secure the lid.
  4. Press the sensor button on the base unit to select the desired function. The illuminated display will indicate the selected mode (e.g., cold frothing, hot stirring).
  5. The appliance will automatically start and switch off once the process is complete.
  6. Carefully remove the glass jug from the base unit. The ergonomic handle ensures safe handling.
A hand lifting the glass jug of the Rommelsbacher MS 650 Milk Frother from its base unit, showing frothed milk inside.
Figure 2: Removing the glass jug from the base unit after preparation.

Frothing Milk:

Use one of the serrated whisks for frothing. The appliance can create fine-pored, firm milk froth.

  • Cold Frothing: Ideal for iced coffees or cold desserts.
  • Warm Frothing: For lattes and cappuccinos with a pleasant temperature.
  • Hot Frothing: For very hot beverages requiring dense, warm foam.

Stirring Milk:

Use the whisking disc for stirring. This function is suitable for heating milk or preparing milk-based drinks without froth.

  • Cold Stirring: For mixing cold milk beverages.
  • Warm Stirring: For gently warming milk.
  • Hot Stirring: For heating milk to a higher temperature, suitable for hot chocolate.
A hand pouring frothed milk from the Rommelsbacher MS 650 Milk Frother's glass jug into a coffee cup.
Figure 3: Pouring frothed milk from the jug.

5. Maintenance and Cleaning

Regular cleaning ensures the longevity and hygiene of your milk frother. Always unplug the appliance before cleaning.

  1. Glass Jug and Lid: The removable glass jug and lid are dishwasher safe or can be hand washed with warm soapy water. Rinse thoroughly and dry immediately.
  2. Stirring Units: Remove the stirring unit from the jug and wash it under running water or with warm soapy water. Ensure no milk residue remains.
  3. Base Unit: Wipe the exterior of the base unit with a soft, damp cloth. Do not immerse the base unit in water or any other liquid. Do not use abrasive cleaners or scouring pads, as these can damage the surface.
  4. Storage: Store the appliance in a dry place. The integrated cord storage helps keep the counter tidy. The extra stirring units can be stored in the integrated compartment at the bottom of the base unit.

6. Troubleshooting

If you encounter any issues with your Rommelsbacher MS 650, please refer to the following common problems and solutions:

  • Appliance does not turn on:
    • Check if the power cord is securely plugged into a working electrical outlet.
    • Ensure the glass jug is correctly placed on the base unit.
  • Milk not frothing properly:
    • Ensure you are using the correct serrated whisk for frothing.
    • Check the milk level; do not exceed the maximum fill line for frothing (300 ml).
    • Ensure the milk is fresh and cold (for best frothing results).
    • Different types of milk (e.g., skim, whole, plant-based) may produce varying froth quality.
  • Milk is not heating:
    • Verify that you have selected a 'warm' or 'hot' function.
    • Ensure the stirring disc is correctly installed for stirring functions.
  • Unusual noise during operation:
    • Check if the stirring unit is properly seated on the pin at the bottom of the jug.
    • Ensure the jug is correctly placed on the base unit.

If the problem persists after checking these points, please contact customer support.

7. Specifications

FeatureSpecification
BrandRommelsbacher
Model NameMS 650
MaterialGlass, Stainless Steel
Capacity (Frothing)300 Milliliters
Capacity (Stirring)400 Milliliters
Wattage600 watts
Voltage230.00 V
Item Weight1.22 Kilograms
Special FeaturesAuto Shut-Off, Ergonomic Handle
Included Components1 x Milk Frother (Base Unit, Glass Jug, Lid, 3 Stirring Units)

8. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Rommelsbacher website. Keep your proof of purchase for any warranty claims.

© 2023 Rommelsbacher. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.