Introduction
This manual provides detailed instructions for the use and maintenance of your Technics EAH-AZ60-K True Wireless Earbuds. These earbuds feature advanced noise cancelling technology, high-fidelity audio, and multipoint Bluetooth connectivity for seamless audio experiences.
Image: Technics EAH-AZ60-K True Wireless Earbuds and their charging case. The earbuds are black with a metallic finish on the outer surface, displaying the Technics logo. The charging case is also black with a matte finish.
Package Contents
Verify that all items are present in the package:
- Technics EAH-AZ60-K Earbuds (Left and Right)
- Charging Case
- USB Charging Cable
- Multiple Sizes of Ear Cushions (7 pairs)
Image: A flat lay of the Technics EAH-AZ60-K earbuds, their charging case, a USB-C charging cable, and seven pairs of silicone ear tips in various sizes.
Setup
1. Charging the Earbuds and Case
Before initial use, fully charge the earbuds and the charging case. Place the earbuds into the charging case and connect the USB charging cable to the case and a power source. The indicator light on the case will show charging status.
- Charging Time: Approximately 24 hours for a full charge of the case and earbuds.
- Quick Charge: A 15-minute charge provides approximately 70 minutes of playback.
Image: The Technics EAH-AZ60-K earbuds in their open charging case, illustrating battery life: 7 hours of listening time per earbud and 24 hours total with the charging case (with noise-cancelling on).
2. Selecting the Correct Ear Tips
Proper ear tip selection is crucial for optimal sound quality, noise cancellation, and comfort. Experiment with the seven included ear tip sizes to find the best fit for your ears. A snug fit ensures effective noise isolation and audio performance.
Image: A close-up of a Technics EAH-AZ60-K earbud being inserted into an ear, alongside an array of seven different sized ear tips, emphasizing comfort and fit.
3. Pairing with a Bluetooth Device
- Open the charging case with the earbuds inside.
- The earbuds will automatically enter pairing mode (indicator lights will flash).
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "Technics EAH-AZ60-K" from the list.
- Once connected, the earbuds will confirm pairing.
4. Technics Audio Connect App
Download the "Technics Audio Connect" app from your device's app store. This app provides advanced control over sound settings, noise cancellation levels, touch controls, and firmware updates.
Image: Screenshots of the Technics Audio Connect app interface on a smartphone, showing options for sound enhancement, noise cancelling percentage, and ambient sound control. The app logo is also visible.
Operating Instructions
Touch Controls
The earbuds feature touch-sensitive surfaces for controlling playback, calls, and noise cancellation modes. Customize these controls via the Technics Audio Connect app.
- Single Tap: Play/Pause, Answer/End Call
- Double Tap: Skip Track Forward, Reject Call
- Triple Tap: Skip Track Backward
- Long Press: Activate Noise Cancelling/Ambient Sound Mode, Voice Assistant
Noise Cancelling and Ambient Sound Modes
The EAH-AZ60-K earbuds offer active noise cancellation to reduce ambient sounds and an ambient sound mode to allow external sounds to pass through. Switch between these modes using the touch controls or the Technics Audio Connect app.
Call Quality with JustMyVoice Technology
Equipped with JustMyVoice Technology, these earbuds utilize 8 individual microphones and advanced wind noise reduction to ensure clear voice transmission during calls, even in noisy environments.
Image: An X-ray diagram of a Technics EAH-AZ60-K earbud highlighting the internal components, specifically the JustMyVoice™ Processor and the placement of the Feed-Forward Mic, Talk Mic, Voice Detection Mic, and Feed-Back Mic, illustrating the 8 individual mics and advanced wind/noise reduction technology.
Multipoint Connectivity
The earbuds support multipoint connectivity, allowing them to be simultaneously connected to two Bluetooth devices. This enables seamless switching between audio sources, such as a laptop for music and a smartphone for calls.
Image: The Technics EAH-AZ60-K earbuds and charging case positioned near a laptop and a smartphone, illustrating the "Smart Device Switching" feature where earbuds auto-switch to pick up phone or video calls from two paired devices.
Maintenance
Cleaning
Regularly clean the earbuds and charging case to maintain optimal performance and hygiene. Use a soft, dry cloth to wipe the surfaces. For ear tips, remove them from the earbuds and clean with a mild soap solution, then rinse and dry thoroughly before reattaching.
Caution: Do not use abrasive cleaners or immerse the earbuds or case in liquid.
Water Resistance
The EAH-AZ60-K earbuds are IPX4 water resistant, meaning they are protected against splashing water from any direction. This makes them suitable for use during workouts or in light rain. The charging case is not water resistant.
Battery Care
To prolong battery life, avoid fully discharging the earbuds and case frequently. Store them in a cool, dry place when not in use.
Troubleshooting
No Sound or Poor Sound Quality
- Ensure the earbuds are properly seated in your ears.
- Verify that the correct ear tip size is used for a snug fit. An improper fit can significantly affect sound quality and noise cancellation.
- Check the volume level on both your connected device and the earbuds.
- Ensure the earbuds are charged.
- Confirm that the earbuds are correctly paired with your device.
Bluetooth Connectivity Issues
- Turn off the Bluetooth function on your device for a few minutes, then turn it back on and attempt to reconnect.
- Ensure the earbuds are within the Bluetooth range (up to 10 meters) of your device.
- Clear the pairing history on your device and re-pair the earbuds.
- Ensure there are no obstructions or strong interference sources between the earbuds and your device.
Poor Call Quality
- Ensure the microphones are not obstructed.
- Check for strong wind noise in your environment; JustMyVoice technology helps but extreme conditions can still affect clarity.
- Confirm a stable Bluetooth connection.
Specifications
| Feature | Detail |
|---|---|
| Model Number | EAH-AZ60-K |
| Brand | Technics |
| Connectivity Technology | Bluetooth 5.2 |
| Bluetooth Range | Up to 10 meters (33 feet) |
| Noise Control | Active Noise Cancellation |
| Microphones | 8 individual mics with JustMyVoice Technology |
| Battery Life (Earbuds) | Up to 7 hours (with Noise Cancelling) |
| Total Battery Life (with Case) | Up to 24 hours |
| Water Resistance Level | IPX4 (Earbuds only) |
| Frequency Response | 20 Hz - 40 kHz |
| Control Type | Touch, App, Voice (Alexa Built-in, Siri) |
| Included Components | Charging Case, USB Cable, Ear Cushions (7 sizes) |
| Material | Plastic |
| Item Weight | 7.4 ounces (total package) |
| Product Dimensions | 7.1 x 9.4 x 5.5 inches (package) |
Warranty and Support
For warranty information and technical support, please refer to the official Technics website or contact their customer service. You can also visit the Technics Brand Store for additional product information and resources.
