Introduction
This manual provides instructions for the safe and efficient use of your Braun Household MQ 30 EasyClick MultiQuick Hand Blender Chopper Attachment. Please read these instructions carefully before first use and keep them for future reference.
The Braun MQ 30 Chopper Attachment, with a 500 ml capacity, is designed to simplify daily kitchen tasks such as chopping herbs, nuts, hard cheese, onions, carrots, and even small quantities of meat. It features the EasyClick system for quick attachment and detachment from compatible Braun MultiQuick hand blenders.
Safety Information
- Always ensure the hand blender motor unit is unplugged before attaching or detaching the chopper attachment.
- The blades are very sharp. Handle with extreme care during assembly, disassembly, and cleaning.
- Do not operate the chopper without the lid securely in place.
- Keep hands and utensils out of the chopper bowl during operation to prevent injury.
- This attachment is designed for use with specified Braun MultiQuick hand blender models only. Using it with incompatible devices may cause damage or injury.
- Do not overfill the chopper bowl. Refer to the maximum fill line.
- Ensure all parts are dry before storage.
Package Contents
Verify that all components are present in the package:
- 1 x 500 ml Chopper Bowl
- 1 x Chopper Blade
- 1 x Chopper Lid with Gearbox
Image: Braun MQ 30 Chopper Attachment showing the bowl, blade, and lid.
Setup
- Initial Cleaning: Before first use, wash all parts of the chopper attachment (bowl, blade, lid) in warm soapy water. Rinse thoroughly and dry completely. The lid with gearbox should not be submerged in water; wipe it clean with a damp cloth.
- Assemble the Chopper:
- Place the chopper blade onto the center pin inside the chopper bowl. Ensure it sits securely.
- Add your ingredients to the chopper bowl. Do not exceed the maximum fill line.
- Place the chopper lid onto the bowl, aligning the tabs, and twist clockwise until it locks into place.
- Attach to Hand Blender:
- Ensure your Braun MultiQuick hand blender motor unit is unplugged.
- Align the chopper lid's gearbox with the motor unit.
- Press the motor unit onto the chopper lid until you hear a "click," indicating it is securely locked using the EasyClick system.
Image: Illustration of the Braun EasyClick system for attaching accessories.
Operating Instructions
- Prepare Ingredients: Cut larger ingredients into smaller, uniform pieces (approximately 2-3 cm) before placing them in the chopper bowl.
- Connect Power: Plug the hand blender motor unit into a power outlet.
- Chop: Press and hold the speed button on your hand blender motor unit to begin chopping. Use short pulses for coarse chopping or hold for a longer duration for finer results.
- Monitor Progress: Observe the consistency of the ingredients through the transparent bowl.
- Stop Operation: Release the speed button to stop the motor.
- Remove Ingredients: Unplug the hand blender. Detach the motor unit from the chopper lid. Carefully remove the chopper lid, then carefully remove the blade before emptying the chopped ingredients.
Recommended Usage:
- Herbs: For best results, ensure herbs are dry.
- Nuts: Chop in short pulses to avoid turning them into butter.
- Hard Cheese: Cut into small cubes before chopping.
- Onions/Carrots: Cut into quarters or smaller pieces.
- Meat: Ensure meat is boneless and cut into small cubes. Do not process frozen meat.
Image: The Braun chopper attachment processing ingredients.
Cleaning and Maintenance
Proper cleaning ensures the longevity and hygiene of your chopper attachment.
- Always unplug the hand blender motor unit before cleaning.
- Chopper Bowl and Blade: These parts are dishwasher safe. Alternatively, wash them in warm soapy water, rinse, and dry thoroughly.
- Chopper Lid with Gearbox: This part is not dishwasher safe and should not be submerged in water. Wipe it clean with a damp cloth. Ensure no food particles enter the gearbox mechanism.
- Stubborn Food Residue: For difficult-to-remove food, soak the bowl and blade in warm soapy water before cleaning.
- Storage: Store the chopper attachment disassembled or fully assembled in a dry place, away from direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chopper does not operate. | Motor unit not properly attached to the lid. | Ensure the motor unit is securely clicked into place on the chopper lid. |
| Hand blender not plugged in. | Check power connection. | |
| Ingredients are not chopping evenly. | Too many ingredients or pieces are too large. | Reduce the quantity of ingredients. Cut larger items into smaller, uniform pieces. |
| Ingredients are too soft or wet. | For best results with herbs, ensure they are dry. | |
| Chopper is difficult to assemble/disassemble. | Parts are not aligned correctly. | Ensure the blade is correctly seated on the pin and the lid tabs align with the bowl before twisting. |
Specifications
- Model: MQ 30 WH
- Capacity: 500 ml
- Dimensions (Product): 11 x 16 x 11 cm (L x W x H)
- Weight: 300 grams
- Material: Plastic (bowl, lid), Stainless Steel (blade)
- Color: White
- Compatibility: Braun MultiQuick Hand Blenders (MQ 3, MQ 5, and MQ 7 series models 700-787)
- Special Features: Compact, EasyClick system, Non-slip base, Dishwasher safe parts (bowl, blade)
- BPA Free: Yes
Warranty and Support
Braun products are manufactured to the highest quality standards. This product comes with a manufacturer's warranty. Please refer to the warranty card included with your original hand blender motor unit for specific terms and conditions.
Spare Parts Availability: Spare parts for this product are generally available for up to 2 years from the date of purchase.
For further assistance, product registration, or to find authorized service centers, please visit the official Braun website or contact Braun customer service in your region. Links to official support channels are usually provided in the main hand blender manual.
