Product Overview
The Ice-O-Matic ICEU150HA is a high-capacity, air-cooled undercounter ice machine designed for commercial use. It produces up to 185 pounds of half-cube ice daily and features a built-in storage bin. This self-contained unit is ideal for restaurants, bars, and other small businesses requiring a reliable and efficient ice supply.
Figure 1: Front view of the Ice-O-Matic ICEU150HA Undercounter Ice Machine.
Figure 2: Example of the half-cube ice produced by the machine, suitable for various beverages.
Key Features
- High Production Capacity: Produces up to 185 pounds of ice per day, ensuring a consistent supply for commercial needs.
- Built-in Storage Bin: Integrated bin for convenient ice storage, reducing the need for external bins.
- Half-Cube Ice: Ideal ice shape for various applications, including beverages and food displays.
- Air-Cooled System: Efficient cooling mechanism that uses ambient air. Proper ventilation is crucial for optimal performance.
- Durable Construction: Designed for commercial environments, ensuring longevity and reliability.
185 Lbs Daily Production
Durable Stainless Steel
Clear Half-Cube Ice
Compact 24" Width
Setup and Installation
Proper installation is critical for the safe and efficient operation of your Ice-O-Matic ice machine. Professional installation of commercial equipment is highly recommended.
Unpacking
- Carefully remove the unit from its packaging.
- Inspect for any shipping damage. Report any damage to the carrier immediately.
- Ensure all components listed in the packing list are present. The unit typically includes the ice maker with a built-in bin.
Location Requirements
- Place the unit on a level, sturdy surface capable of supporting its weight (approximately 160 pounds when empty, plus ice).
- Ensure adequate air circulation around the machine, especially for the air-cooled condenser. Do not block the air intake or exhaust vents.
- Maintain proper clearances as specified in the full installation manual to prevent overheating and ensure efficient operation.
- Avoid locations exposed to direct sunlight, heat sources, or extreme temperatures.
Utility Connections
- Electrical: Connect to a dedicated 115 Volt, 60 Hz, single-phase electrical supply as per local electrical codes. Refer to the unit's data plate for specific amperage requirements.
- Water Supply: Connect to a potable water supply with appropriate pressure and filtration. Ensure all water line connections are secure and properly sealed to prevent leaks.
- Drainage: Connect the unit to an open, indirect drain. Ensure proper slope for gravity drainage and prevent backflow.
Operating Instructions
Once properly installed and connected, the Ice-O-Matic ICEU150HA is designed for straightforward operation.
Initial Startup
- Ensure all water and electrical connections are secure and the drain line is properly routed.
- Turn on the water supply to the machine.
- Plug in the unit or turn on the dedicated circuit breaker.
- The machine will typically begin its ice-making cycle automatically. The first batch of ice may take longer to produce and should be discarded to flush the system.
Ice Production
- The machine will continuously produce half-cube ice until the storage bin is full.
- When the bin is full, a sensor will detect the ice level and temporarily halt production. Production will resume automatically as ice is removed from the bin.
- Use a clean ice scoop to retrieve ice from the bin. Do not use hands or other objects that may contaminate the ice.
Shutdown
- For temporary shutdown, simply turn off the power switch on the unit or unplug it.
- For extended shutdown or cleaning, turn off the power, shut off the water supply, and drain the unit completely.
Maintenance
Regular maintenance ensures optimal performance, ice quality, and extends the lifespan of your Ice-O-Matic ice machine.
Daily/Weekly Maintenance
- Keep the exterior of the machine clean with a damp cloth.
- Ensure the air filter (if accessible) is free of dust and debris to maintain proper airflow for the air-cooled condenser. Clean as needed.
- Regularly clean the ice scoop and the interior of the ice storage bin.
Monthly/Quarterly Maintenance
- Cleaning Cycle: Perform a full cleaning and sanitizing cycle using an approved ice machine cleaner and sanitizer. Follow the instructions provided with the cleaning solution.
- Water Filter Replacement: If an external water filter is installed, replace it according to the manufacturer's recommendations (typically every 3-6 months, depending on water quality and usage).
- Inspect water lines and drain lines for any signs of wear, kinks, or blockages.
For detailed cleaning procedures and recommended cleaning agents, refer to the comprehensive cleaning guide provided with your unit or consult the Ice-O-Matic website.
Troubleshooting
Before contacting service, review the following common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No ice production | No power; water supply off; clogged water filter; high ambient temperature. | Check power connection/breaker; ensure water supply is on; replace water filter; ensure proper ventilation. |
| Low ice production | Dirty condenser coil; restricted airflow; low water pressure; high water temperature. | Clean condenser coil/air filter; ensure proper clearances; check water supply pressure; ensure water supply temperature is within specifications. |
| Ice is soft or cloudy | Poor water quality; dirty evaporator; improper water level. | Install/replace water filter; perform cleaning cycle; verify water level settings. |
| Water leaks from unit | Loose water connections; clogged drain line; faulty float switch. | Tighten water line connections; clear drain line; contact service for float switch issues. |
| Unusual noises | Loose components; motor issues; fan obstruction. | Inspect for loose parts; contact service if noise persists. |
If the problem persists after attempting these solutions, or if you suspect a major component failure, contact a qualified service technician. Do not attempt repairs beyond your technical capabilities.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | ICEU150HA |
| Brand | Ice-O-Matic |
| Ice Type | Half Cube |
| Cooling Type | Air Cooled |
| Daily Ice Production Capacity | 185 Lb (under optimal conditions) |
| Product Dimensions (W x D x H) | 27 x 29 x 40 inches |
| Item Weight | 160 Pounds |
| Voltage | 115 Volts |
| Wattage | 1164 watts |
| Manufacturer | Ice-O-Matic |
| First Available Date | May 9, 2008 |
Warranty and Support
The Ice-O-Matic ICEU150HA comes with a manufacturer's warranty. Please note the following important information regarding warranty coverage:
- The manufacturer warranty only covers commercial use of this product.
- Use of this item in non-commercial or residential environments will void the warranty.
For specific warranty terms, service requests, or additional information, please contact Ice-O-Matic customer support or your authorized dealer. You may also call for more information at (714) 665-2433.
