Trust Tytan 2.1 Speaker Set User Manual

1. Introduction

Thank you for purchasing the Trust Tytan 2.1 Speaker Set. This powerful 2.1 subwoofer speaker system is designed to deliver high-quality audio with deep bass, suitable for various devices including PCs, laptops, TVs, smartphones, and tablets. It offers both wired and wireless Bluetooth connectivity for versatile use. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the best experience from your speaker system.

2. Safety Information

Please read all safety instructions carefully before using the product. Keep this manual for future reference.

• Do not expose the device to rain, moisture, or extreme temperatures.
• Avoid placing the speakers near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3. Package Contents

Ensure all the following items are present in your package:

• Trust Tytan 2.1 Bluetooth Speaker System (1x Subwoofer, 2x Satellite Speakers)
• Audio Cables (RCA to 3.5mm jack)
• Wired Remote Control
• Instruction Manual

4. Setup

Follow these steps to set up your Trust Tytan 2.1 Speaker System:

1. Positioning: Place the subwoofer on the floor, ideally in a corner for enhanced bass. Position the two satellite speakers on either side of your listening area, facing you.
2. Connect Satellite Speakers: Connect the cables from the two satellite speakers to the corresponding output ports on the back of the subwoofer. These are typically RCA connectors.
3. Connect Wired Remote Control: Plug the wired remote control cable into the dedicated port on the back of the subwoofer. This remote allows for easy volume adjustment and provides headphone and auxiliary input jacks.
4. Connect to Audio Source:
   • Wired Connection: Use the provided audio cable (RCA to 3.5mm jack) to connect the subwoofer's input to the audio output (headphone jack) of your PC, laptop, TV, or other audio device.
   • Bluetooth Connection: For wireless connection, refer to the "Operating Instructions" section for Bluetooth pairing.
5. Power Connection: Plug the power cable from the subwoofer into a wall socket.

Image: The Trust Tytan 2.1 Speaker Set, illustrating the subwoofer, two satellite speakers, and the wired remote control. The back of the subwoofer shows the various connection ports for satellite speakers, audio input, and power.

5. Operating Instructions

5.1 Power On/Off

Once connected to power, the speaker system will automatically power on. The system features intelligent power management and will switch to standby mode when not in use.

5.2 Volume Control

Adjust the master volume using the large rotary knob on the wired remote control. Turn clockwise to increase volume and counter-clockwise to decrease.

5.3 Bluetooth Pairing

To connect your device via Bluetooth:

1. Ensure the speaker system is powered on.
2. Activate Bluetooth on your smartphone, tablet, or other Bluetooth-enabled device.
3. Search for available Bluetooth devices. The speaker system will appear as "Trust Tytan 2.1" or similar.
4. Select the speaker system from the list to pair. Once paired, a confirmation sound may be heard, and the indicator light on the remote control may change.
5. You can now play audio wirelessly through the speakers.

Note: The speaker system will automatically try to reconnect to the last paired device when powered on.

5.4 Wired Audio Input (AUX)

For wired audio input, connect your device's 3.5mm audio output to the AUX input jack located on the wired remote control. This will override the Bluetooth connection if both are active.

5.5 Headphone Output

A 3.5mm headphone jack is available on the wired remote control. Plugging in headphones will mute the speakers, allowing for private listening.

6. Maintenance

Proper care will ensure the longevity of your speaker system:

• Cleaning: Use a soft, dry cloth to clean the surfaces of the speakers and subwoofer. Do not use liquid cleaners or aerosol sprays directly on the units.
• Dust: Regularly dust the speaker grilles and vents to prevent accumulation, which can affect sound quality and ventilation.
• Placement: Avoid placing the speakers in direct sunlight or in areas with high humidity.
• Cables: Ensure cables are not kinked or pinched, as this can damage them over time.

7. Troubleshooting

If you encounter issues with your Trust Tytan 2.1 Speaker Set, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Trust website. You can typically find support resources, FAQs, and contact information for customer service there.

Trust Official Website: www.trust.com

Please have your model number (19367) and purchase details ready when contacting support.