1. Introduction
This manual provides instructions for the safe and efficient installation, operation, and maintenance of your Philips Celestial Ceiling Lamp. The Philips Celestial ceiling lamp is designed to provide warm white light, suitable for various indoor environments, including bathrooms due to its IP21 rating.
2. Safety Information
- Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
- Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
- This product is rated IP21, meaning it is protected against solid objects over 12.5mm and vertically falling water drops. It is suitable for bathroom zone 3 applications.
- Do not exceed the maximum wattage specified for the bulb (60W E27).
- Ensure proper grounding during installation.
- Do not modify the product in any way.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x Philips Celestial Ceiling Lamp fixture
- 1 x E27 Bulb (Philips bulb included)
- Mounting hardware (screws, wall plugs)
- Instruction Manual
4. Setup and Installation
Tools Required: Screwdriver, drill, pencil, measuring tape.
- Step 1: Prepare the Installation Area
Turn off the main power supply to the installation area at the circuit breaker. Use a voltage tester to confirm the power is off. Mark the drilling points on the ceiling using the lamp base as a template. - Step 2: Mount the Fixture Base
Drill holes at the marked points. Insert appropriate wall plugs if necessary. Secure the lamp base to the ceiling using the provided screws. - Step 3: Electrical Connection
Connect the live (L), neutral (N), and ground (earth) wires from the ceiling to the corresponding terminals on the lamp fixture. Ensure all connections are secure and properly insulated. - Step 4: Install the Bulb
Carefully screw the E27 bulb into the lamp holder. Do not overtighten. - Step 5: Attach the Diffuser
Carefully attach the lamp diffuser to the base, ensuring it is securely fastened according to the fixture design. - Step 6: Restore Power
Turn on the main power supply at the circuit breaker. Test the lamp to ensure it functions correctly.
Figure 1: Philips Celestial Ceiling Lamp, front view. A white, dome-shaped Philips Celestial ceiling lamp with a translucent diffuser, designed for even light distribution.
Figure 2: Dimensions diagram for Philips Celestial Ceiling Lamp. Technical drawing illustrating the dimensions of the Philips Celestial ceiling lamp. The lamp has a diameter of 287mm and a height of 127mm.
5. Operating Instructions
The Philips Celestial Ceiling Lamp operates via a standard wall switch connected to its power supply.
- To turn the lamp ON or OFF, use the connected wall switch.
- This lamp is compatible with dimmers for adjustable light intensity. Ensure any dimmer used is compatible with the installed E27 bulb type (dimmer not included).
6. Maintenance
- Cleaning: Disconnect power before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, chemical solvents, or harsh detergents, as these may damage the finish.
- Bulb Replacement: Ensure power is off and the lamp has cooled down completely. Unscrew the old E27 bulb and replace it with a new E27 bulb of the specified wattage (maximum 60W).
7. Troubleshooting
If you encounter issues with your Philips Celestial Ceiling Lamp, refer to the following common problems and solutions:
- Lamp does not light up:
- Check if the main power supply to the lamp is switched on.
- Verify that the bulb is correctly installed and not faulty. Replace the bulb if necessary.
- Ensure all electrical connections are secure and properly wired.
- Light flickers:
- Check the bulb for a loose connection or damage.
- If a dimmer is used, ensure it is compatible with the bulb type and properly installed.
If issues persist after performing these checks, consult a qualified electrician for further assistance.
8. Specifications
| Brand | Philips |
| Model Number | 915002575702 |
| Dimensions (L x W x H) | 28.7 x 28.7 x 12.7 cm |
| Weight | 1.27 kg |
| Material | Resin (Fixture), Aluminum (Shade) |
| Color | White |
| Style | Contemporary |
| Bulb Type | Halogen (E27 socket) |
| Number of Bulbs | 1 |
| Max Wattage | 60 Watts |
| Voltage | 230 Volts |
| IP Rating | IP21 |
| Color Temperature | 2800 Kelvin (Warm White) |
| Special Feature | Water-resistant (due to IP21 rating) |
| Installation Type | Ceiling Mount |
| Specific Uses | Living room, Bathroom (Zone 3) |
9. Warranty Information
This Philips Celestial Ceiling Lamp comes with a 15-year warranty from the date of purchase. The warranty covers manufacturing defects under normal use conditions. Please retain your proof of purchase for any warranty claims.
10. Support
For further assistance, technical support, or warranty claims, please visit the official Philips website or contact Philips customer service. You can find more information and contact details on the Philips website: www.philips.com/support
