PowerA DualShock Charging Station for PlayStation 4 User Manual

Introduction

The PowerA DualShock Charging Station for PlayStation 4 is designed to conveniently charge up to two DualShock 4 controllers simultaneously. This officially licensed product ensures your controllers are always ready for extended gaming sessions, eliminating interruptions due to low battery.

What's in the Box

• DualShock 4 Charging Station
• AC Adapter

Figure 1: Front view of the PowerA DualShock Charging Station retail packaging.

Figure 2: Back view of the retail packaging, illustrating key features and benefits of the charging station.

Setup Instructions

1. Connect the AC Adapter: Plug the AC adapter into a wall outlet.
2. Connect to Charging Station: Insert the micro-USB cord from the AC adapter into the port located on the bottom of the charging station. Thread the cord through the designated channel for neat cable management.
3. Placement: Place the charging station on a stable, flat surface near your PlayStation 4 console.

Figure 3: Step-by-step diagram for connecting the AC adapter to the charging station and power source.

Operating Instructions

1. Docking Controllers: Align the DualShock 4 controller with the extension port on the charging station. Gently push the controller down until it clicks into place. The spring-loaded design ensures proper alignment.
2. Charging Indication: The light bar on the controller will turn orange to indicate that it is charging.
3. Full Charge Indication: Once the controller is fully charged, the orange light bar will turn off. The charging station automatically stops charging when the battery is full, making it safe to leave controllers docked.
4. Removing Controllers: To remove a controller, gently push down on it once more until it releases from the locked position, then lift it from the charging station.

Figure 4: Two DualShock 4 controllers correctly placed in the charging station.

Figure 5: Controllers displaying the orange light bar, signifying active charging.

Battery Care Information

DualShock 4 controllers use lithium batteries. Unlike older battery types, lithium batteries do not develop a 'memory' and do not need to be fully drained before recharging. It is safe to recharge them after every gaming session and leave them plugged in, as the controller's built-in voltage regulator will stop charging once the battery is full. Avoid fully draining the battery, as this can be detrimental to its lifespan. Charging after each use or when a low battery warning appears is recommended.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the charging station. Do not use abrasive cleaners or chemical solvents.
• Storage: When not in use, store the charging station and controllers in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

• Controller Not Charging:
  • Ensure the AC adapter is securely plugged into both the wall outlet and the charging station.
  • Verify that the controller is properly seated and clicked into the charging port. The orange light bar should illuminate.
  • Try a different wall outlet to rule out power supply issues.
• Charging Light Turns Off Quickly: This typically indicates the controller is already fully charged. The station is designed to stop charging once the battery reaches full capacity.
• Controller is Too Sensitive / Disconnects Easily: Ensure the controller is firmly seated and clicked into the charging port. Avoid placing the station in high-traffic areas where it might be bumped.

Specifications

Warranty Information

For detailed warranty information, please refer to the official PowerA website or the warranty card included with your product. Warranty terms and conditions may vary by region and retailer.

Support

For further assistance, product registration, or to view additional products, please visit the official PowerA store:

Visit the PowerA Store