1. Introduction
This manual provides comprehensive instructions for the Fossil Rhett Analog Watch, model BQ1009. This timepiece features a gold-tone stainless steel case, a white dial, and a brown leather strap. It is equipped with a chronograph movement for precise timekeeping and additional functions. Please read this manual carefully to ensure proper use and maintenance of your watch.
2. Watch Components
Familiarize yourself with the main components of your Fossil Rhett watch:
- Case: The main body of the watch, housing the movement and dial.
- Dial: The face of the watch displaying time and other indicators.
- Hands: Hour, minute, and second hands for time indication.
- Crown: Used for setting time and date.
- Pushers: Buttons used to operate the chronograph functions.
- Strap: The brown leather band for wearing the watch.
Image 1: Front view of the Fossil Rhett Analog Watch BQ1009, showcasing the white dial, gold-tone case, and brown leather strap.
Image 2: Side view of the Fossil Rhett Analog Watch BQ1009, highlighting the crown and chronograph pushers on the right side of the gold-tone case.
Image 3: Diagram illustrating the dial features of the Fossil Rhett Analog Watch BQ1009, including the 24-hour dial, seconds in digits, hours in Roman numerals, minute dial, and second dial.
3. Initial Setup
3.1 Setting the Time
- Pull the crown out to position 2.
- Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
- Push the crown back into position 1 to start the watch.
3.2 Setting the Date
- Pull the crown out to position 1 (first click).
- Turn the crown clockwise to advance the date until the correct date is displayed.
- Push the crown back into its original position.
3.3 Adjusting the Strap
The leather strap features a standard buckle closure. Adjust the strap by selecting the appropriate hole for a comfortable and secure fit on your wrist.
4. Operating Instructions
4.1 Timekeeping
Once the time is set, the watch will continuously display the current time. The main hands indicate hours and minutes, while a sub-dial typically shows the running seconds.
4.2 Chronograph Function
The Fossil Rhett BQ1009 features a chronograph for measuring elapsed time:
- Start: Press the top pusher (A) to start the chronograph. The chronograph second hand will begin to move.
- Stop: Press the top pusher (A) again to stop the chronograph. The elapsed time will be indicated by the chronograph hands.
- Reset: After stopping, press the bottom pusher (B) to reset the chronograph hands to their zero positions.
5. Care and Maintenance
5.1 Water Resistance
Your Fossil Rhett BQ1009 watch has a water resistance rating of 5 ATM (50 meters). This means it is suitable for short periods of recreational swimming, but not for diving or snorkeling. Avoid operating the crown or pushers when the watch is wet to prevent water intrusion.
5.2 Cleaning
To clean your watch, wipe the case with a soft, damp cloth. For the leather strap, use a dry, soft cloth. Avoid using chemical cleaners, as they can damage the watch's finish or the leather.
5.3 Battery Replacement
The watch is powered by a product-specific battery. When the watch stops running, it indicates that the battery needs replacement. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance.
5.4 Strap Care
The brown leather strap is durable but can be affected by moisture, sweat, and direct sunlight. To prolong its life, avoid prolonged exposure to water and extreme temperatures. Clean with a dry cloth and allow it to air dry if it gets wet.
Image 4: A selection of interchangeable watch bands, demonstrating that the 20mm strap on the Fossil Rhett BQ1009 can be replaced with various styles.
6. Troubleshooting
- Watch not running: Check if the crown is pushed in completely. If it is, the battery may need replacement.
- Incorrect time: Reset the time as described in section 3.1.
- Date not changing: Ensure the date is set correctly and that the crown is fully pushed in. If the date changes at noon instead of midnight, advance the time by 12 hours.
- Chronograph hands not resetting to zero: This may require a chronograph reset procedure, which typically involves pulling the crown out and using the pushers to align the hands. Refer to a specialized watch repair guide or contact customer support if this issue persists.
7. Specifications
Image 5: Diagram detailing the dimensions and materials of the Fossil Rhett Analog Watch BQ1009, including a 42mm case size, 20mm strap/lug width, 12mm case thickness, stainless steel case material, and leather strap material.
| Feature | Detail |
|---|---|
| Model Number | BQ1009 |
| Movement Type | Quartz Chronograph |
| Case Material | Stainless Steel |
| Case Diameter | 42 mm |
| Case Thickness | 12 mm |
| Strap Material | Leather |
| Strap Color | Brown |
| Strap Width | 20 mm |
| Dial Color | White |
| Water Resistance | 5 ATM (50 meters) |
| Included Components | Chronograph, Water Resistance Feature |
8. Warranty Information
This Fossil watch is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration of coverage. The warranty typically covers manufacturing defects under normal use.
9. Customer Support
For further assistance, service, or inquiries regarding your Fossil Rhett Analog Watch BQ1009, please contact Fossil customer support. Contact details can usually be found on the official Fossil website or on the warranty documentation provided with your watch.
Manufacturer: Fossil India Pvt Ltd
Address: Fossil India Pvt Ltd Khata Khatoni No-147/150 Min, Village-Tipra Barotiwala Teh- Nalagarh Distt.-Solan (H.P) - 174103
