Introduction
This manual provides essential information for the safe and effective use of the Blodgett 36429 Circuit Breaker. This genuine OEM replacement part is designed for use in Blodgett commercial ovens and steamers, ensuring safety, reliability, and performance.
Please read this manual thoroughly before installation or operation and retain it for future reference.
Product Overview
Figure 1: Blodgett 36429 Circuit Breaker. This image displays the compact, black circuit breaker unit, highlighting its rocker switch and the label with technical details on its side.
The Blodgett 36429 is a standard circuit breaker designed to protect electrical circuits from damage caused by overcurrent or short circuit. It features a manual reset rocker switch.
Setup and Installation
WARNING: Installation should only be performed by a qualified electrician or authorized service technician. Disconnect all power to the equipment before attempting any installation or maintenance.
- Safety First: Ensure the main power supply to the appliance is completely disconnected and locked out before beginning installation. Verify with a voltage tester.
- Identify Location: Locate the existing circuit breaker or the designated installation point within the appliance's electrical system.
- Remove Old Component (if applicable): Carefully disconnect and remove the old circuit breaker, noting the wiring connections.
- Connect Wiring: Connect the electrical wires to the terminals of the new Blodgett 36429 Circuit Breaker according to the appliance's wiring diagram. Ensure all connections are secure and properly insulated.
- Mounting: Securely mount the circuit breaker in its designated slot or housing.
- Verify Installation: Double-check all connections and ensure the circuit breaker is firmly in place.
- Restore Power: Once installation is complete and verified, restore power to the appliance.
Operating Instructions
The Blodgett 36429 Circuit Breaker operates as an automatic protective device. It is designed to trip and interrupt the electrical circuit when an overcurrent or short circuit condition is detected, preventing damage to the appliance and potential hazards.
- Normal Operation: In normal operating conditions, the circuit breaker's rocker switch will be in the "ON" (I) position, allowing current to flow.
- Tripped State: If an overcurrent or short circuit occurs, the circuit breaker will automatically trip, moving the rocker switch to the "OFF" (O) or a central tripped position. This indicates a fault in the circuit.
- Resetting the Breaker:
- Identify and resolve the cause of the trip (e.g., overloaded circuit, faulty component).
- Once the fault is cleared, firmly push the rocker switch to the "OFF" (O) position, then back to the "ON" (I) position to reset the breaker.
- If the breaker immediately trips again, do not attempt to reset it repeatedly. Consult a qualified technician.
Maintenance
The Blodgett 36429 Circuit Breaker is a low-maintenance component. Regular maintenance should focus on ensuring its operating environment is clean and free from obstructions.
- Visual Inspection: Periodically inspect the circuit breaker for any signs of physical damage, discoloration, or loose connections.
- Cleaning: If necessary, gently clean the exterior of the circuit breaker with a dry, soft cloth. Do not use liquids or abrasive cleaners.
- Professional Check: It is recommended to have the electrical system of your appliance, including circuit breakers, inspected by a qualified technician during routine appliance servicing.
Troubleshooting
If the Blodgett 36429 Circuit Breaker trips, it indicates an electrical fault. Do not ignore repeated tripping.
| Problem | Possible Cause | Solution |
|---|---|---|
| Circuit breaker trips frequently. | Overloaded circuit, short circuit, faulty appliance component, or worn-out breaker. | Reduce load on the circuit. Inspect appliance for faulty components. If problem persists, consult a qualified electrician. |
| Circuit breaker does not reset. | Persistent electrical fault, internal damage to the breaker. | Ensure the fault is cleared. If it still doesn't reset, the breaker may need replacement. Consult a qualified electrician. |
| Breaker feels hot to the touch. | Loose connection, overloaded circuit, or internal fault. | Immediately disconnect power. Do not touch. Consult a qualified electrician. |
Important: Never bypass or tamper with a circuit breaker. It is a critical safety device.
Specifications
| Attribute | Detail |
|---|---|
| Brand: | Blodgett |
| Model Number: | 36429 |
| Part Number: | 36429 |
| Circuit Breaker Type: | Standard |
| Item Weight: | 1.6 ounces |
| Product Dimensions: | 4 x 4 x 6 inches |
| Batteries Required: | No |
| Manufacturer: | Prtst |
| UPC: | 220215010872, 782247839420 |
| ASIN: | B00EN9VFNA |
| Date First Available: | August 15, 2013 |
| OCR Data (from label): |
|
Warranty and Support
As a genuine OEM replacement part, the Blodgett 36429 Circuit Breaker is manufactured to high standards. For specific warranty information, please refer to the warranty policy provided with your original Blodgett appliance or contact Blodgett customer support directly.
For technical assistance or inquiries regarding this product, please contact Blodgett customer service or an authorized service provider.
