Cooper-Atkins 50337-K

Download PDF
Contents

Cooper-Atkins 50337-K DuraNeedle Probe Type K Thermocouple Instruction Manual

This manual provides essential instructions for the proper setup, operation, and maintenance of your Cooper-Atkins 50337-K DuraNeedle Probe.

Product Overview

The Cooper-Atkins 50337-K DuraNeedle Probe is a robust, direct-connect Type K thermocouple designed for accurate temperature measurement. Its direct connection feature allows for easy one-handed operation by plugging directly into a compatible instrument without the need for an additional cable.

Key Features

  • Accessory/Replacement Probe for Blue2 Instrument and Kit part numbers 20100-K and 92010-K
  • Temperature Range: -100°F to 500°F (-73°C to 260°C)
  • Response Time: 1 second in liquid
  • Shaft Length: 4" (102 mm)
  • Shaft Diameter: 0.125" (3 mm)
  • Reduced Tip Diameter: 0.085" (2 mm)
  • Maximum Tip Temperature: 500°F (260°C)
Cooper-Atkins 50337-K DuraNeedle Probe

Image: The Cooper-Atkins 50337-K DuraNeedle Probe, featuring a stainless steel needle and a yellow direct-connect Type K thermocouple plug.

Setup

Unpacking

Carefully remove the DuraNeedle Probe from its packaging. Verify that the included components match the product description. The box should contain: 1 DuraNeedle Probe.

Connecting the Probe

The 50337-K DuraNeedle Probe is designed for direct connection. Align the yellow Type K thermocouple plug with the corresponding input port on your compatible temperature measuring instrument (e.g., Blue2 Instrument, part numbers 20100-K or 92010-K). Gently push the probe into the port until it is securely seated. No additional cables are required for connection.

Operating Instructions

Temperature Measurement

Once connected to a compatible instrument, the probe is ready for use. Insert the stainless steel needle tip into the substance or area where temperature measurement is required. Ensure the tip is fully immersed or in firm contact for accurate readings. The instrument will display the temperature. The probe has a fast response time of 1 second in liquid.

Temperature Range

The probe is designed to measure temperatures within the range of -100°F to 500°F (-73°C to 260°C). Do not expose the probe to temperatures outside this range, as it may cause damage or inaccurate readings.

Maintenance

Cleaning

After each use, especially when measuring food or other substances, clean the stainless steel probe shaft thoroughly. Wipe clean with a damp cloth and a mild detergent. Rinse with clean water and dry completely before storage. Do not immerse the yellow connector portion in liquid.

Storage

Store the probe in a clean, dry place, protected from extreme temperatures and physical damage. Avoid bending the needle tip.

Troubleshooting

Inaccurate Readings

  • Ensure the probe tip is properly inserted into the substance being measured.
  • Verify that the probe is securely connected to the instrument.
  • Check if the instrument itself is functioning correctly.
  • Confirm that the measured temperature is within the probe's specified range (-100°F to 500°F).

No Reading

  • Ensure the probe is fully and correctly plugged into the instrument.
  • Check for any visible damage to the probe or its connector.
  • Consult your instrument's manual for specific error codes or connection issues.

Specifications

FeatureDetail
Model Number50337-K
Probe TypeType K Thermocouple
Connection TypeDirect Connect
Temperature Range-100°F to 500°F (-73°C to 260°C)
Response Time1 second (in liquid)
Shaft Length4" (102 mm)
Shaft Diameter0.125" (3 mm)
Reduced Tip Diameter0.085" (2 mm)
Maximum Tip Temperature500°F (260°C)
MaterialStainless Steel (Outer Material)
Product Dimensions2.02 x 0.39 x 0.39 inches; 1.5 ounces
ManufacturerCooper-Atkins Corporation
Included ComponentsDuraNeedle Probe
Product CareWipe Clean

Warranty and Support

Warranty Information

The Cooper-Atkins 50337-K DuraNeedle Probe comes with a 1-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Cooper-Atkins customer support. Refer to the official Cooper-Atkins website or product packaging for the most current contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.