1. Introduction
The SEVERIN FS 3604 Vacuum Sealer is designed to preserve food by removing air from specially designed bags and then sealing them. This process extends the freshness of food, reduces waste, and is ideal for portioning, freezing, and preparing food for sous-vide cooking. The appliance features automatic vacuuming and sealing, making food preservation simple and efficient.
The SEVERIN FS 3604 vacuum sealer in white, showcasing its compact design and automatic operation for vacuuming and sealing food.
2. Safety Instructions
Please read these safety instructions carefully before using the appliance and keep them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- This appliance is intended for domestic use only.
- Do not immerse the appliance, power cord, or plug in water or any other liquids.
- Ensure the voltage indicated on the rating label matches your mains voltage.
- Keep the appliance out of reach of children and pets.
- Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Always unplug the appliance from the power outlet when not in use, before cleaning, or in case of a malfunction.
- Do not use the appliance outdoors.
- Avoid touching hot surfaces, especially the sealing bar, during and immediately after operation.
- Use only original accessories and bags recommended by the manufacturer.
3. Product Components
Familiarize yourself with the main parts of your SEVERIN FS 3604 Vacuum Sealer:
- Main Unit: The primary housing of the appliance.
- Lid: Covers the vacuum chamber and sealing bar.
- Sealing Bar: Heats up to create an airtight seal on the bag.
- Vacuum Chamber: Area where air is extracted from the bag.
- Film Roll Holder: Internal compartment for storing the film roll.
- Cutting Wire: Used to cut film rolls to the desired bag length.
- Viewing Window: Allows monitoring of the film roll supply.
- Indicator Lights: Display the status of the vacuuming and sealing process.
- Power Cord: Connects the appliance to the electrical outlet.
A detailed view of the SEVERIN FS 3604 vacuum sealer, pointing out its integrated film roll, cutting wire, and a transparent window to monitor the film supply.
4. Setup
Before first use, follow these steps to set up your vacuum sealer:
- Unpack the Appliance: Carefully remove all packaging materials and ensure all components are present.
- Placement: Place the vacuum sealer on a clean, dry, and stable surface. Ensure there is enough space around the appliance for proper ventilation.
- Power Connection: Plug the power cord into a suitable electrical outlet (230V).
- Loading the Film Roll: The appliance comes with a 28.5 cm wide film roll. Open the lid and insert the film roll into the designated holder. Pull out a sufficient length of film to create a bag, then use the integrated cutting wire to cut it to size. Seal one end of the film to form a bag before vacuuming.
5. Operating Instructions
5.1. Vacuum Sealing Food
This function automatically vacuums air from the bag and then seals it.
- Prepare the Bag: Place the food item inside a vacuum sealer bag, leaving at least 6-8 cm of space between the food and the open end of the bag. Ensure the open end is clean and dry.
- Position the Bag: Open the lid of the vacuum sealer. Place the open end of the bag flat into the vacuum chamber, ensuring it lies smoothly over the sealing bar and within the drip tray.
- Close the Lid: Firmly press down on both sides of the lid until it clicks into place.
- Automatic Operation: The appliance will automatically begin the vacuuming process. The indicator lights will show the status (vacuuming, then sealing).
- Release: Once the sealing process is complete and the indicator lights turn off, press the release buttons (if present) or lift the lid to open. Carefully remove the sealed bag.
A clear plastic bag containing fresh strawberries being processed by the SEVERIN FS 3604 vacuum sealer, demonstrating the sealing function.
5.2. Sealing Only
Use this function to seal bags without vacuuming, suitable for delicate items or creating custom-sized bags from a roll.
- Prepare the Bag: Place the open end of the bag over the sealing bar.
- Close the Lid: Firmly press down on both sides of the lid until it clicks into place.
- Initiate Sealing: The appliance will automatically detect the bag and initiate the sealing process. The sealing indicator light will illuminate.
- Release: Once the sealing is complete and the light turns off, open the lid and remove the sealed bag.
6. Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your vacuum sealer.
- Always Unplug: Before cleaning, ensure the appliance is unplugged from the power outlet and has cooled down.
- Exterior Cleaning: Wipe the exterior of the appliance with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Sealing Bar and Vacuum Chamber: Carefully wipe the sealing bar and the vacuum chamber with a damp cloth to remove any food residue or moisture. Ensure these areas are completely dry before closing the lid or storing the appliance.
- Do Not Immerse: Never immerse the main unit in water or any other liquid.
- Storage: Store the appliance in a clean, dry place. For best results, store with the lid unlatched to prevent compression of the sealing gaskets.
7. Troubleshooting
If you encounter issues with your SEVERIN FS 3604 Vacuum Sealer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | No power supply. | Check if the power cord is securely plugged into the outlet and the appliance. Test the outlet with another device. |
| Vacuuming is not effective or incomplete. | Bag not properly placed; bag is damaged; moisture in the vacuum chamber; lid not fully closed. | Ensure the open end of the bag is flat and fully inside the vacuum chamber. Check the bag for holes or tears. Clean and dry the vacuum chamber. Press down firmly on the lid until it clicks on both sides. |
| Bag does not seal properly. | Sealing bar is dirty or wet; bag material is unsuitable; sealing bar is worn. | Clean and dry the sealing bar. Ensure you are using appropriate vacuum sealer bags. If the sealing bar is worn, contact customer support. |
| Air re-enters the bag after sealing. | Poor seal; bag is punctured; food with sharp edges. | Ensure the seal is complete and even. Check the bag for small punctures. For sharp foods, use a paper towel or soft material to cushion sharp edges inside the bag. |
8. Specifications
Key technical details for the SEVERIN FS 3604 Vacuum Sealer:
- Model: FS 3604 (S73604)
- Power: 160 Watts
- Voltage: 230 Volts
- Dimensions (L x W x H): 34 x 13.5 x 10 cm (13.4 x 5.3 x 3.9 inches)
- Weight: 1.72 Kilograms (3.79 lbs)
- Material: Plastic
- Color: White
- Operation Mode: Automatic
- Maximum Film Width: 28.5 cm
9. Warranty and Support
SEVERIN products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official SEVERIN website. Keep your proof of purchase for any warranty claims.
For technical support, spare parts, or service inquiries, please contact SEVERIN customer service through their official channels. Contact details can typically be found on the product packaging, the official SEVERIN website, or your retailer's support page.
Online Resources: For additional tips, recipes, and product information, visit the official Severin Brand Store.
