Ryobi 140132007 4V Lithium Charger Instruction Manual

1. Product Overview

The Ryobi 140132007 is a replacement 4V Lithium Charger designed for various Ryobi TEK4 tools. This charger is essential for maintaining the power of your compatible Ryobi 4V lithium-ion batteries.

What's Included:

• 1 x Ryobi 140132007 Charger

Image: The Ryobi 140132007 4V Lithium Charger, a compact black unit with a charging port.

2. Safety Information

Please read and understand all safety instructions before using this charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Indoor Use Only: This charger is designed for indoor use in dry conditions. Do not expose to rain or wet conditions.
• Correct Voltage: Ensure the power source voltage matches the charger's requirements.
• Avoid Damage: Do not operate the charger if it has received a sharp blow, been dropped, or damaged in any way.
• Keep Dry: Never immerse the charger in water or any other liquid.
• Disconnect When Not in Use: Always unplug the charger from the power outlet when not in use or before cleaning.
• Children: Keep the charger out of reach of children.
• Compatible Batteries: Only charge Ryobi AP4001 4V lithium-ion batteries with this charger. Attempting to charge other battery types may cause personal injury and damage.

3. Setup

1. Unpack the Charger: Carefully remove the charger from its packaging. Inspect it for any signs of damage.
2. Connect to Power: Plug the charger into a standard 120V AC electrical outlet.
3. Identify Battery: Ensure you are using a compatible Ryobi AP4001 4V lithium-ion battery. The battery is not included with the charger.

4. Operating Instructions

Follow these steps to charge your Ryobi 4V lithium-ion battery:

1. Insert Battery: Align the Ryobi AP4001 4V battery with the charging port on the 140132007 charger. Push the battery firmly into the charger until it clicks into place.
2. Charging Indication: The charger typically has an indicator light (not specified in product details, refer to your battery's manual for specific battery charge indicators) that will illuminate to show charging is in progress.
3. Charging Time: A fully discharged Ryobi AP4001 4V battery will take approximately 12 hours to fully charge.
4. Remove Battery: Once charging is complete, disconnect the battery from the charger by pressing any release tabs (if present on the battery) and pulling the battery out. Unplug the charger from the power outlet.

5. Compatibility

This Ryobi 140132007 charger is compatible with the Ryobi AP4001 4V lithium-ion battery and the following Ryobi TEK4 tools:

• Ryobi HP53L 4V Lithium-Ion Reversible Screwdriver
• RP4205 TEK4 Inspection Scope
• RP4206 4V Lithium Ion Inspection Tool
• HP53LK 4V Reversible Screwdriver
• AP4800 TEK4 4 Volt Charger (This charger is a replacement for AP4800)
• HP64L 4 Volt Right Angle Driver
• RP4450 TEK4 4 Volt LED Flashlight
• RP4470 TEK4 4 Volt LED Jobsite Light
• RP4510 TEK4 MP3 Player

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your charger.

• Cleaning: Disconnect the charger from the power supply before cleaning. Use a dry, soft cloth to wipe the exterior of the charger. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the charger in a dry, indoor location away from direct sunlight, moisture, and extreme temperatures.
• Inspection: Periodically inspect the charger and its cord for any signs of damage, such as cuts, frayed wires, or cracked housing. If damage is found, discontinue use and replace the charger.

7. Troubleshooting

If you encounter issues with your charger, refer to the following common problems and solutions:

• Battery Not Charging:
  • Ensure the charger is securely plugged into a working electrical outlet.
  • Verify the battery is correctly inserted into the charger.
  • Check the battery for damage. A damaged battery may not charge.
  • Confirm the battery is a compatible Ryobi AP4001 4V lithium-ion battery.
• Slow Charging:
  • Ensure the charger is operating within its specified temperature range. Extreme temperatures can affect charging efficiency.
  • Verify the power outlet is providing stable voltage.

If troubleshooting steps do not resolve the issue, contact Ryobi customer support or a qualified service technician.

8. Specifications

9. Warranty and Support

Specific warranty information for the Ryobi 140132007 charger is typically provided with the product packaging or can be found on the official Ryobi website. Please retain your proof of purchase for warranty claims.

For technical assistance, replacement parts, or further inquiries, please contact Ryobi customer support through their official channels. Always refer to the original owner's manual for your specific Ryobi tool for complete information.