Remington Pro Power HC5200 Hair Clipper User Manual

1. Introduction and Product Overview

The Remington Pro Power HC5200 Hair Clipper is designed for efficient and precise hair clipping. Featuring Advanced Steel self-sharpening blades and a powerful Pro Power motor, this clipper delivers consistent performance for various hair types. It offers both corded and cordless operation for convenience.

Image 1.1: Remington Pro Power HC5200 Hair Clipper and packaging. This image displays the product and its main features as presented on the box.

2. Important Safety Information

Warning! Always use the clipper with care to prevent personal injury. Read and understand all instructions before use.

• Charge and handle the battery carefully.
• Avoid using the hair clipper near water or while charging to prevent potential electrical hazards.
• Do not immerse the appliance in water.
• Keep the appliance away from children.
• Ensure the power cord is not damaged before use.
• Clean and maintain the hair clipper according to the instructions provided to prevent bacterial growth and ensure optimal performance.

3. Product Features

• Advanced Steel Blades: Self-sharpening blades for long-lasting cutting performance.
• Pro Power Motor: Delivers powerful cutting performance, suitable for all hair types.
• Adjustable Guide Combs: Includes two adjustable guide combs offering 16 cutting lengths from 3mm to 42mm.
• Corded/Cordless Operation: Can be used with or without the power cord, providing flexibility.
• Lithium-ion Battery: Provides up to 40 minutes of cordless runtime.
• Charge Indicator: Light indicates charging status.
• Included Accessories: Cleaning brush and lubricating oil for maintenance.

Image 3.1: Internal view of the Remington Pro Power HC5200 motor and blades. This illustration highlights the powerful motor and precision steel blades.

4. Setup and Charging

4.1 Initial Charging

1. Before first use, fully charge the clipper for approximately 14-16 hours.
2. Ensure the clipper is switched off before connecting it to the charging adapter.
3. Plug the adapter into a standard electrical outlet. The charge indicator light will illuminate.
4. A full charge provides up to 40 minutes of cordless use.

4.2 Attaching Guide Combs

The HC5200 comes with two adjustable guide combs. These combs allow for various cutting lengths.

1. Ensure the clipper is switched off.
2. Select the desired guide comb. Each comb has a range of adjustable lengths.
3. Align the comb with the clipper blades and push it firmly until it clicks into place.
4. Adjust the cutting length by sliding the selector on the comb to the desired setting (3mm to 42mm). Refer to the markings on the comb for precise length selection.

Image 4.1: Remington HC5200 adjustable guide combs. This image shows the two guide combs that come with the clipper, used for setting different hair lengths.

5. Operating Instructions

5.1 General Hair Clipping Tips

• For best results, use the clipper on clean, dry hair.
• Always start with a longer cutting length setting and gradually reduce it until the desired length is achieved.
• Hold the clipper with the blades pointing downwards and move it against the direction of hair growth.
• Use smooth, even strokes. Do not force the clipper through thick hair.
• Regularly tap or brush away clipped hair from the blades during use to maintain cutting efficiency.

5.2 Corded and Cordless Use

• Cordless: Ensure the clipper is fully charged. Switch on the clipper and begin clipping. The charge indicator light will show when the battery is low.
• Corded: If the battery is depleted or you prefer corded operation, connect the charging adapter to the clipper and a power outlet. You can use the clipper while it is plugged in.

Image 5.1: Man using Remington HC5200 hair clipper to trim hair. This image demonstrates the practical application of the hair clipper for personal grooming.

6. Maintenance and Cleaning

Proper maintenance ensures the longevity and performance of your hair clipper.

6.1 Cleaning After Each Use

1. Switch off the clipper and unplug it if connected to power.
2. Remove the guide comb.
3. Use the provided cleaning brush to brush away any loose hair from the blades and the clipper body.
4. For a more thorough clean, the blades can be detached. Refer to the detailed instructions in the full product manual for blade removal and reattachment.
5. Do not rinse the clipper body under water. The blades can be rinsed under running water if detached, but ensure they are completely dry before reattaching.

6.2 Lubricating the Blades

To maintain optimal cutting performance, lubricate the blades regularly.

1. After cleaning, apply a small drop of the provided lubricating oil to the teeth of the blades.
2. Switch on the clipper for a few seconds to allow the oil to distribute evenly.
3. Wipe off any excess oil with a soft cloth.

7. Troubleshooting

If you encounter issues with your Remington HC5200 Hair Clipper, refer to the following common solutions:

8. Product Specifications

9. Warranty and Support

For warranty information, product registration, or further support, please refer to the official Remington website or contact their customer service department. Keep your proof of purchase for warranty claims.

You can typically find contact information and detailed warranty terms on the manufacturer's official website or within the product packaging.