1. Introduction
Thank you for purchasing the Timex T121U Alarm Clock. This compact and user-friendly digital alarm clock features a clear 0.7-inch red LED display, an alarm function, and operates on battery power for convenience. This manual provides comprehensive instructions to help you set up, operate, and maintain your new alarm clock.
2. Important Safety Information
- Indoor Use Only: This product is designed for indoor use. Do not expose to rain or moisture.
- Battery Safety: Use only the specified battery type (1 AA battery, not included). Ensure correct polarity when inserting batteries. Remove batteries if the unit will not be used for an extended period. Do not mix old and new batteries or different types of batteries.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.
- Placement: Place the clock on a stable, flat surface. Avoid placing near heat sources, direct sunlight, or in areas with excessive dust or vibration.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
3. Package Contents
- Timex T121U Alarm Clock with 0.7" Red Display (Purple)
4. Product Overview
Familiarize yourself with the various parts and controls of your Timex T121U Alarm Clock.
Figure 4.1: Front and Top View of the Timex T121U Alarm Clock. Note the red digital display and the buttons for Time, Hour, Min, ALM, Set/Reset, and Snooze located on the top panel.
Figure 4.2: Back View of the Timex T121U Alarm Clock (black variant shown for illustration). This view highlights the battery compartment and the power input port.
Controls and Features:
- TIME Button: Used to enter time setting mode.
- HOUR Button: Adjusts the hour during time or alarm setting.
- MIN Button: Adjusts the minute during time or alarm setting.
- ALM Button: Used to enter alarm setting mode.
- SET/RESET Button: Confirms settings or resets functions.
- SNOOZE Button: Temporarily silences the alarm for a short period.
- 0.7-inch Red LED Display: Shows time, alarm status, and other indicators.
- Battery Compartment: Located on the back for 1 AA battery (for backup power).
5. Initial Setup
5.1 Powering the Unit
- Insert 1 AA battery (not included) into the battery compartment on the back of the clock. Ensure correct polarity (+ and -). This battery provides backup power in case of a power outage.
- Connect the AC power adapter (if included, or use a standard USB power adapter if the clock has a USB power input) to the DC IN port on the back of the clock and then plug it into a standard wall outlet. The display will light up.
5.2 Setting the Time
- Press and hold the TIME button until the hour digits begin to flash.
- Press the HOUR button repeatedly to adjust the hour. Pay attention to the PM indicator if setting a 12-hour format.
- Press the MIN button repeatedly to adjust the minutes.
- Once the desired time is set, press the SET/RESET button to confirm and exit time setting mode.
6. Operating Instructions
6.1 Setting the Alarm
- Press and hold the ALM button until the alarm hour digits begin to flash.
- Press the HOUR button repeatedly to adjust the alarm hour.
- Press the MIN button repeatedly to adjust the alarm minutes.
- Once the desired alarm time is set, press the SET/RESET button to confirm and exit alarm setting mode. The alarm indicator light (usually an icon or 'ALM') will illuminate on the display, indicating the alarm is active.
6.2 Activating/Deactivating the Alarm
- To activate the alarm, ensure the alarm indicator light is on. If it's off, press the ALM button once briefly to toggle it on.
- To deactivate the alarm, press the ALM button once briefly to toggle the alarm indicator light off.
6.3 Snooze Function
When the alarm sounds, press the large SNOOZE button located on the top of the clock. The alarm will temporarily stop and sound again after a few minutes (typically 9-10 minutes). You can repeat this function multiple times.
6.4 Stopping the Alarm
To stop the alarm completely after it sounds (without snoozing), press the SET/RESET button. The alarm will reset for the next day at the set time, provided the alarm function remains active.
7. Care and Maintenance
- Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
- Battery Replacement: If the display dims or the backup function fails during a power outage, replace the AA battery in the compartment on the back.
- Storage: If storing the clock for an extended period, remove the battery to prevent leakage.
8. Troubleshooting
If you experience issues with your alarm clock, please refer to the following table for common problems and solutions.
| Problem | Possible Cause / Solution |
|---|---|
| Clock display is blank or dim. |
|
| Alarm does not sound. |
|
| Time or alarm cannot be set. |
|
| Display segments are faded or missing. |
|
9. Product Specifications
| Feature | Detail |
|---|---|
| Model Number | T121U |
| Brand | Timex |
| Display Type | Digital LED |
| Display Color | Red |
| Display Size | 0.7 inches |
| Color (Product) | Purple |
| Power Source | Electrical (with 1 AA battery for backup) |
| Product Dimensions | 5.52"W x 2.36"H |
| Item Weight | 9.4 ounces |
| Alarm Function | Yes |
| Snooze Function | Yes |
10. Warranty and Support
Timex products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Timex website. Keep your purchase receipt as proof of purchase.
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Timex customer service through their official website or the contact information provided on your product packaging.
Online Support: www.timex.com
