1. Introduction
Thank you for choosing the WMF Lono Bouilloire 1.6L Electric Kettle. This manual provides essential information for the safe and efficient use, maintenance, and care of your new appliance. Please read these instructions thoroughly before first use and keep them for future reference.
Image 1.1: The WMF Lono Bouilloire 1.6L Electric Kettle, featuring a sleek stainless steel design.
2. Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using the kettle.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or electric kettle in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Contact WMF customer service for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or personal injury.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to 'off', then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- Ensure the lid is securely closed before operating.
- This kettle is equipped with Boil-Dry Protection and Overheat Protection. If the kettle is accidentally switched on without water or with insufficient water, it will automatically switch off. Allow it to cool down before refilling.
3. Product Components
Familiarize yourself with the various parts of your WMF Lono Bouilloire 1.6L Electric Kettle:
- Kettle Body: Made from high-quality Cromargan stainless steel.
- Lid: Hinged lid for easy filling.
- Handle: Ergonomically designed for comfortable pouring.
- Water Level Indicator: Transparent window with markings for precise filling.
- Power Base: 360-degree rotational base with cord storage.
- Removable Limescale Filter: Located in the spout to prevent limescale particles from entering your cup.
- On/Off Switch: Located at the base of the handle for easy operation.
Image 3.1: Detailed view of the water level indicator on the side of the kettle, showing measurements up to 1.6 liters.
Image 3.2: The kettle with its lid open, clearly showing the removable limescale filter in the spout area.
4. Setup
4.1 Unpacking
Carefully remove all packaging materials from the kettle and its power base. Ensure all components are present and undamaged. Dispose of packaging responsibly.
4.2 First Use Cleaning
Before using your kettle for the first time, it is recommended to clean it:
- Fill the kettle with fresh water up to the 'MAX' mark (1.6L).
- Boil the water.
- Discard the boiled water.
- Repeat this process two to three times to remove any manufacturing residues.
4.3 Placing the Kettle
Place the power base on a stable, flat, heat-resistant surface. Ensure the power cord is not dangling or in contact with hot surfaces. The kettle can be placed on the power base from any angle due to its 360-degree design.
Image 4.1: The WMF Lono Electric Kettle securely placed on its power base, ready for use.
5. Operating Instructions
5.1 Filling the Kettle
Open the lid and fill the kettle with the desired amount of fresh water. Do not fill below the 'MIN' mark or above the 'MAX' mark (1.6L) indicated on the water level indicator. Close the lid securely.
5.2 Boiling Water
- Place the filled kettle onto the power base.
- Plug the power cord into a suitable electrical outlet (220-240V, 50/60Hz).
- Press the On/Off switch downwards. The indicator light will illuminate, signifying that the kettle is heating.
- The kettle will automatically switch off once the water has boiled. The indicator light will turn off.
- Carefully remove the kettle from the power base and pour the hot water. Be cautious of steam and hot surfaces.
Image 5.1: The On/Off switch located at the base of the kettle's handle, used to initiate the boiling process.
6. Maintenance and Cleaning
Regular cleaning and maintenance will prolong the life of your WMF Lono Electric Kettle.
6.1 Exterior Cleaning
Wipe the exterior of the kettle with a soft, damp cloth. Do not use abrasive cleaners or scouring pads, as these can damage the Cromargan stainless steel finish. Ensure the power base and electrical connections remain dry.
6.2 Interior Cleaning and Descaling
Over time, limescale deposits may build up inside the kettle, especially in hard water areas. This can affect performance and taste. The kettle features a removable and washable limescale filter.
- Filter Cleaning: The limescale filter can be removed from the spout for cleaning. Rinse it under running water or gently brush it to remove deposits. Ensure it is properly reinserted before use.
- Descaling: For thorough descaling, use a commercially available descaling agent suitable for electric kettles. Follow the instructions provided with the descaling agent. Alternatively, you can use a solution of white vinegar and water (e.g., 1 part vinegar to 2 parts water). Fill the kettle with the solution, let it stand for an hour (do not boil), then discard and rinse thoroughly several times with fresh water.
Image 6.1: The clean interior of the WMF Lono Electric Kettle, showing the heating element at the base.
7. Troubleshooting
If you encounter issues with your kettle, refer to the following table before contacting customer service:
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not heat up. | No power supply; Kettle not properly seated on base; On/Off switch not pressed. | Check power outlet; Ensure kettle is correctly placed on the power base; Press the On/Off switch firmly. |
| Kettle switches off prematurely. | Limescale buildup; Boil-dry protection activated. | Descale the kettle; If boil-dry protection activated, allow kettle to cool down before refilling and restarting. |
| Water tastes unusual or has particles. | New kettle residue; Limescale buildup. | Perform first use cleaning again; Clean or descale the kettle and filter. |
| Lid does not close properly. | Obstruction or damage. | Check for any foreign objects preventing closure; If damaged, contact customer support. |
8. Specifications
- Model: WMF Lono Bouilloire 1.6L (6130245121)
- Capacity: 1.6 Litres
- Body Material: Cromargan Stainless Steel
- Max Power Consumption: 2400 W
- Voltage: 220 - 240 V / 50/60 Hz
- Safety Features: Overheat Protection, Boil-Dry Protection
- Special Features: Water Level Indicator, Washable Scale Filter, Removable Limescale Filter
- Product Dimensions: 12.4 x 9.84 x 7.01 inches (approx.)
- Item Weight: 4.4 pounds (approx.)
- Product Care Instructions: Hand wash, Wipe clean
9. Warranty and Customer Support
9.1 Warranty Information
This WMF Lono Electric Kettle comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
9.2 Customer Support
For further assistance, technical support, or spare parts, please visit the official WMF website or contact their customer service department. Contact details can typically be found on the WMF website or in the product packaging.
