Product Overview
The Simplex 5000 lock provides fully mechanical pushbutton access control without any wiring, electronics or batteries. Exterior access is by combination. Egress is by an exit device (sold separately) and is free at all times. This lock is designed for controlling access to high-traffic, security sensitive areas in commercial, industrial, educational, governmental, lodging, and multi-unit residential settings.
Image: The Simplex 5000 Series Cylindrical Mechanical Pushbutton Lock, featuring a satin chrome finish and a keypad with numbered buttons (1-5) and an 'ENTER' button, along with a Winston lever handle.
Key Features:
- Single Access Code
- ANSI/BHMA Grade 1 Certified
- Highly weather resistant
- Vandal resistant solid metal pushbuttons (5 buttons)
Setup and Installation
The Kaba Simplex 5000 Series lock is a mechanical device designed for robust security. Proper installation is crucial for its functionality and longevity. It is recommended that installation be performed by a qualified locksmith or professional familiar with door hardware.
Pre-Installation Checks:
- Ensure the door thickness is compatible with the lock's specifications.
- Verify that all components are present as per the packing list. Note that the core is not included with this model.
- Confirm the backset measurement (70mm for this model) matches your door preparation.
Installation Steps (General Guidance):
- Prepare the door: Ensure the door is properly bored and mortised according to the lock's template.
- Install the latch mechanism: Secure the 13mm throw latch into the door edge.
- Assemble the lock components: Carefully align and attach the exterior and interior lock bodies, ensuring the floating face plate is correctly positioned.
- Secure the lock: Fasten the lock assembly to the door using the provided screws.
- Test functionality: Before closing the door, test the lever and pushbutton mechanism to ensure smooth operation.
For detailed, step-by-step installation instructions, please refer to the comprehensive guide provided in the product packaging or consult the manufacturer's official website.
Operating Instructions
The Simplex 5000 Series lock operates mechanically using a single access code. No batteries or external power are required.
To Gain Entry (Exterior):
- Enter the pre-set combination by pressing the correct sequence of the five solid metal pushbuttons.
- Press the "ENTER" button after inputting the combination.
- Turn the Winston lever handle to retract the latch and open the door.
The combination is set during installation or by a qualified technician. Refer to the installation manual for instructions on how to change the combination.
To Exit (Interior):
Egress from the interior is always free. Simply operate the exit device (sold separately) to open the door. No combination is required for exit.
Maintenance
The Simplex 5000 Series lock is designed for durability and minimal maintenance. Regular care will ensure its continued reliable operation.
Cleaning:
- Wipe the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents, which can damage the satin chrome finish.
- For the pushbuttons, use a soft brush to remove any accumulated dust or debris.
Lubrication:
As a mechanical lock, internal components may benefit from periodic lubrication. Use a silicone-based lubricant or a dry graphite lubricant sparingly on moving parts, such as the latch bolt and lever mechanism. Avoid oil-based lubricants, which can attract dirt.
Environmental Considerations:
The lock is highly weather resistant, but extreme conditions may require more frequent inspection. Ensure no water or debris accumulates around the lock mechanism.
Troubleshooting
If you encounter issues with your Simplex 5000 Series lock, refer to the common problems and solutions below. For complex issues, contact a qualified locksmith.
| Problem | Possible Cause | Solution |
|---|---|---|
| Combination not opening lock | Incorrect combination entered; combination has been changed; internal mechanism issue. | Verify the correct combination. Ensure all buttons are fully depressed. If recently changed, confirm the new code. Consult the installation manual for combination reset procedures. |
| Lever does not retract latch | Latch binding; internal mechanism obstruction; incorrect installation. | Check for any obstructions around the latch bolt or strike plate. Ensure the lock is securely mounted and not misaligned. Apply a dry lubricant to the latch bolt. |
| Buttons feel stiff or sticky | Dirt or debris accumulation; lack of lubrication. | Clean the buttons and surrounding area. Apply a small amount of dry graphite lubricant to the button mechanisms. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Simplex |
| Model Name | Simplex 5000 Series Cylindrical Mechanical Pushbutton Lock |
| Model Number | 5021SWL26D |
| Lock Type | Combination Lock |
| Material | Chrome, Metal |
| Finish Type | Satin Chrome |
| Controller Type | Push Button |
| Special Feature | Keyless, Highly Weather Resistant, Vandal Resistant Pushbuttons |
| Certifications | ANSI/BHMA Grade 1 Certified |
| Latch Throw | 13mm |
| Backset | 70mm |
| Core | Not Included (Schlage compatible) |
| Item Weight | 8.3 pounds |
| Package Dimensions | 10.8 x 10.2 x 4.7 inches |
| Batteries Required | No |
Warranty Information
The Kaba Simplex 5000 Series Cylindrical Mechanical Pushbutton Lock comes with a 3-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service.
Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, abuse, unauthorized repairs, or normal wear and tear.
For full warranty terms and conditions, please refer to the documentation included with your product or visit the official Simplex/Kaba Ilco website.
Customer Support
For technical assistance, product inquiries, or warranty claims, please contact Simplex customer support. It is helpful to have your product model number (5021SWL26D) and purchase date available when contacting support.
You may find additional resources, FAQs, and contact information on the official Kaba Ilco website. For professional installation or complex repairs, it is recommended to consult a certified locksmith.
