Introduction
The Beats Studio 2.0 Wired Over-Ear Headphones have been engineered for an immersive audio experience. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your headphones, ensuring optimal performance and longevity.
Image: Front-side view of the Beats Studio 2.0 Wired Over-Ear Headphones in white, showcasing the sleek design and earcups.
Setup
Unboxing and Contents
Carefully remove all components from the packaging. Verify that all items are present:
- Beats Studio over-ear headphones
- 3.5mm audio cable with RemoteTalk
- Standard 3.5 mm audio cable
- USB 2.0 charging cable (USB-A to USB Micro-B)
- USB power adapter
- Hard-shell carrying case with carabiner clip
- Beats cleaning cloth
- Quick Start-Up Guide
Image: Direct front view of the Beats Studio 2.0 headphones, showing both earcups and the headband.
Charging the Headphones
The Beats Studio 2.0 headphones feature a 20-hour rechargeable battery. To charge:
- Connect the micro USB end of the USB 2.0 charging cable to the charging port on the headphone.
- Connect the USB-A end of the cable to the USB power adapter.
- Plug the USB power adapter into a wall outlet.
The visible Battery Fuel Gauge will indicate the charging status. To conserve battery life, the Auto On/Off feature automatically turns off the headphones when unplugged from an audio source.
Connecting to an Audio Source
The headphones connect via a 3.5mm audio jack:
- Insert one end of the 3.5mm audio cable (either standard or RemoteTalk) into the audio input jack on the headphone.
- Insert the other end of the cable into the 3.5mm audio output jack of your device (e.g., smartphone, tablet, computer).
Operating
Audio Playback
The Beats Acoustic Engine and signature DSP software are designed to deliver a rich and emotional listening experience. Once connected, audio from your source device will play through the headphones.
Adaptive Noise Canceling (ANC)
The headphones feature dual-mode Adaptive Noise Canceling to reduce ambient noise:
- Listening Mode: When music is playing, ANC automatically balances the noise cancellation level with your audio, providing an optimal listening environment.
- ANC Only Mode: If you wish to only cancel external noise without playing music, the headphones can be used in ANC only mode. This mode automatically increases the level of noise cancellation for a quieter environment.
Using the RemoteTalk Cable
The included RemoteTalk cable allows for convenient control of your audio and calls:
- Call Control: Answer or end calls directly from the cable's inline microphone and remote.
- Volume Control: Adjust audio volume.
- Track Control: Play, pause, skip tracks.
Image: Side profile of the Beats Studio 2.0 headphones, highlighting the earcup design and the 'studio' branding on the headband.
Maintenance
Cleaning
To maintain the appearance and hygiene of your headphones:
- Use the provided Beats cleaning cloth to gently wipe the surfaces of the headphones.
- Avoid using harsh chemicals, abrasive cleaners, or excessive moisture.
Storage
When not in use, store your headphones in the hard-shell carrying case to protect them from dust, scratches, and impacts. The foldable design allows for compact storage.
Image: The Beats Studio 2.0 headphones shown in their folded, compact state, ready for storage in the carrying case.
Safety Information
To ensure safe operation and prevent damage:
- Keep the headphones away from liquids.
- Do not charge the headphones during a power outage or electrical storm.
Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones not turning on or holding charge. | Low or depleted battery; defective battery. | Ensure the headphones are fully charged using the provided USB cable and adapter. Check the Battery Fuel Gauge. If issues persist, contact support. |
| No audio or intermittent audio. | Loose cable connection; incorrect cable; audio source issue. | Ensure both ends of the 3.5mm audio cable are securely plugged into the headphones and the audio source. Try a different audio cable or audio source to isolate the problem. |
| Noise Canceling (ANC) not effective or producing static. | ANC limitations; environmental factors. | ANC is most effective against low-frequency, constant noises. High-frequency or sudden noises may not be fully canceled. A faint static sound can be normal with active noise cancellation. Ensure headphones are properly seated on your ears. |
| RemoteTalk cable controls not working. | Incompatibility with device; cable damage. | Ensure your device supports the RemoteTalk cable's functions. Try the standard audio cable to confirm basic audio functionality. Inspect the RemoteTalk cable for any visible damage. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | 900-00063-01 |
| Item Model Number | BT OV STU WHT |
| Connectivity Technology | Wired |
| Headphones Jack | 3.5 mm Jack |
| Ear Placement | Over Ear |
| Noise Control | Active Noise Cancellation |
| Battery Life | Up to 20 hours (rechargeable) |
| Item Weight | 2.07 pounds (0.94 kg) |
| Product Dimensions | 9.57 x 4.52 x 7.28 inches |
| Material | Plastic |
| Special Features | Foldable, Lightweight, Volume Control |
| Manufacturer | Beats Electronics, LLC |
Warranty and Support
Manufacturer's Warranty
This product includes a manufacturer's warranty. Please refer to the warranty documentation provided with your purchase for specific terms and conditions. The product has been cleaned, inspected, and meets manufacturer specifications.
Additional Support
For further assistance or detailed information, you may refer to the official User Manual PDF available online:
For direct support, please contact Beats Electronics, LLC customer service.
