Introduction
The TP-Link Jetstream TL-SG1008PE is an 8-Port Gigabit Desktop Switch equipped with 8 Power over Ethernet (PoE+) ports. This unmanaged switch is designed to expand your network capacity and provide power to PoE-compatible devices such as wireless access points, IP cameras, and VoIP phones through a single Ethernet cable. It features energy-efficient technology to reduce power consumption and offers simple plug-and-play installation without requiring complex configuration.
Product Features
- 8 Gigabit RJ45 ports for high-speed network connections.
- 8 PoE+ ports (IEEE 802.3af/at compliant) to transfer both data and power over a single cable.
- Total PoE power budget of up to 124W.
- Innovative energy-efficient technology reduces power output by up to 75%.
- Plug and play design, requiring no configuration.
- Compatible with IEEE 802.3af/at compliant Powered Devices (PDs).
- Durable metal casing for reliable operation.
Package Contents
- TL-SG1008PE 8-Port Gigabit Desktop Switch with 8-Port PoE
- Power cord
- Installation guide
- Mounting bracket for 19" rack
- Rubber feet
Physical Overview
Front Panel
This image displays the front panel of the TL-SG1008PE switch. It features eight RJ45 Gigabit Ethernet ports, labeled 1 through 8. To the left of the ports are LED indicators for Power, PoE Status, Link/Act, and PoE MAX, providing visual feedback on the switch's operational status and port activity.
Rear Panel
The rear panel of the TL-SG1008PE switch is shown here. It includes the AC power input connector (100-240V~ 50/60Hz 2.0A) and a grounding screw for electrical safety.
Setup
- Unpack the Switch: Carefully remove the switch and all accessories from the packaging.
- Placement: Place the switch on a stable, flat surface such as a desktop, or install it into a 19-inch rack using the provided mounting brackets. Ensure adequate ventilation around the switch.
- Connect Power: Connect the provided power cord to the AC power input on the rear panel of the switch and then to a standard electrical outlet. The Power LED on the front panel should illuminate.
- Connect Non-PoE Devices: Use standard Ethernet cables to connect your non-PoE network devices (e.g., computers, routers, non-PoE network storage) to any of the RJ45 ports (1-8).
- Connect PoE Devices: Use Ethernet cables to connect your PoE-compatible devices (e.g., IP cameras, wireless access points, VoIP phones) to any of the RJ45 ports (1-8). The switch will automatically detect and provide power to these devices if they are PoE-compliant.
Operating Instructions
The TL-SG1008PE is an unmanaged switch, meaning it operates on a plug-and-play basis without requiring any software configuration. Once powered on and connected, it automatically detects network speeds and provides power to connected PoE devices. The LED indicators on the front panel provide real-time status information.
LED Indicators
| LED | Status | Description |
|---|---|---|
| Power | On | The switch is powered on. |
| PoE Status | On | A PoE device is connected and receiving power. |
| Link/Act (per port) | On | A device is connected to the corresponding port. |
| Flashing | Data is being transmitted or received through the corresponding port. | |
| PoE MAX | On | The total PoE power consumption is approaching or exceeding 124W. |
Maintenance
- Cleaning: Keep the switch clean and free from dust. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners.
- Ventilation: Ensure that the ventilation openings on the switch are not blocked to prevent overheating. Maintain adequate space around the device for airflow.
- Cable Management: Organize network cables to prevent tangles and reduce strain on ports.
- Power Cycle: If the switch experiences issues, try power cycling it by disconnecting and reconnecting the power cord.
Troubleshooting
- No Power: If the Power LED is off, ensure the power cord is securely connected to both the switch and a working electrical outlet. Verify the outlet is supplying power.
- No Link/Connection: If a Link/Act LED is off for a connected device, check the Ethernet cable connection at both ends. Try a different cable or port. Ensure the connected device is powered on and functioning correctly.
- PoE Device Not Powering On: If a PoE device is not receiving power, check the PoE Status LED for that port. Ensure the device is PoE-compatible (IEEE 802.3af/at). Verify that the total power consumption of all PoE devices does not exceed the switch's 124W budget (check the PoE MAX LED). Try connecting the device to a different PoE port.
- Slow Network Speed: Ensure all connected devices and cables support Gigabit Ethernet for optimal performance. Check for excessive network traffic or faulty cables.
Specifications
| Feature | Detail |
|---|---|
| Model Number | TL-SG1008PE |
| Number of Ports | 8 |
| Interface | 8 x 10/100/1000Mbps RJ45 Ports (AUTO Negotiation/AUTO MDI/MDIX) |
| PoE Ports | 8 PoE+ ports (IEEE 802.3af/at compliant) |
| Total PoE Power Budget | 124W |
| Data Transfer Rate | 1000 Megabits Per Second |
| Switch Type | Unmanaged |
| Power Supply | 100-240VAC, 50/60Hz (Internal) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
| Dimensions (W x D x H) | Approx. 294 x 180 x 44 mm (11.6 x 7.1 x 1.7 in) |
| Item Weight | 2.06 Kilograms |
| Case Material | Metal |
Warranty and Support
The TP-Link TL-SG1008PE switch comes with a LIMITED LIFETIME WARRANTY. For technical assistance, TP-Link offers 24/7 technical support. Please refer to the official TP-Link website or the contact information provided in your product packaging for the most up-to-date support details and warranty terms.
For further information, visit the TP-Link Store on Amazon.
