Introduction
The CLEAN REMOTE CR1 is a universal TV remote control designed for simplicity and hygiene. It is compatible with over 250 brands of televisions, including both modern flat screens and older models. This remote features a one-touch setup, eliminating the need for complex programming codes. Its spill-proof, non-porous surface allows for easy cleaning and disinfection, making it ideal for environments where cleanliness is paramount, such as hotels, motels, and healthcare facilities. The design prevents guests from altering TV settings, ensuring consistent operation.
Package Contents
- CLEAN REMOTE CR1 Universal TV Remote Control
- Instruction Manual (this document)
Note: Batteries are not included and must be purchased separately. Two AAA batteries are required.
Setup
1. Battery Installation
- Locate the battery compartment on the back of the remote control. The CR1 features a hidden battery compartment with an attached door.
- Slide the battery compartment door downwards or press the latch to open it.
- Insert two (2) AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment door securely.
2. Initial Use (No Programming Required)
The CLEAN REMOTE CR1 is designed for one-touch setup and requires no programming codes. Once batteries are installed, the remote is ready to operate most major TV brands. Simply point the remote at your television and press the POWER button.

Image: Front view of the CLEAN REMOTE CR1, illustrating its simple button layout.
Operating Instructions
The CLEAN REMOTE CR1 features a simplified button layout for essential TV functions:
- POWER: Turns the television on or off.
- CHANNEL UP/DOWN: Changes the TV channel up or down.
- VOLUME UP/DOWN: Adjusts the television volume up or down.
- MUTE: Silences the television audio.
- INPUT/SOURCE: Cycles through available video input sources (e.g., HDMI 1, AV, Component).
- NUMBER BUTTONS (0-9): For direct channel entry.
Point the remote directly at the television's infrared receiver for optimal performance. The maximum effective range is approximately 10 meters (33 feet).
Maintenance and Cleaning
The CLEAN REMOTE CR1 is designed for easy maintenance and superior hygiene. Its non-porous, spill-proof surface helps prevent the accumulation of bacteria and makes cleaning simple.
- Ensure the remote is not in use during cleaning.
- Use a soft, damp cloth with a mild, non-abrasive cleaning solution or disinfectant wipe.
- Gently wipe down all surfaces of the remote control. Avoid excessive moisture.
- Do not submerge the remote in any liquid.
- Allow the remote to air dry completely before use.
Regular cleaning helps maintain the remote's hygienic properties and extends its lifespan.
Troubleshooting
- Remote is not responding:
- Check if the batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with new AAA alkaline batteries.
- Ensure there are no obstructions between the remote and the TV's infrared sensor.
- Confirm you are within the effective operating range (approximately 10 meters).
- Remote controls some functions but not others:
- While the CR1 is universal, some very specific or advanced TV functions may not be supported by its simplified design.
- Ensure the TV is not in a mode that restricts certain remote functions (e.g., hotel mode).
- TV does not respond to the remote at all:
- Verify that the TV is powered on and functioning correctly with its original remote or manual controls.
- If the issue persists after trying new batteries and ensuring clear line of sight, the remote may be faulty or incompatible with a specific TV model.
Specifications
| Feature | Detail |
|---|---|
| Brand | CLEAN REMOTE |
| Model Name | CR1 (4330951856) |
| Special Feature | Universal, No Codes Needed |
| Color | Black |
| Compatible Devices | Television |
| Connectivity Technology | Infrared (IR) |
| Maximum Range | 10 Meters (approx. 33 feet) |
| Battery Type | 2 x AAA Alkaline Batteries (not included) |
| Controller Type | Button Control |
| Item Weight | Approximately 16 ounces (for a 10-pack, individual remote weight not specified) |
Warranty and Support
CLEAN REMOTE products are manufactured to high standards. For specific warranty information, please refer to the documentation provided at the time of purchase or contact CLEAN REMOTE customer support directly. Keep your purchase receipt as proof of purchase.
Customer Support:
For technical assistance, troubleshooting, or warranty inquiries, please visit the official CLEAN REMOTE website or contact their customer service department. Contact details are typically available on the product packaging or the manufacturer's website.
Please note that product specifications and features are subject to change without prior notice.