Speed Queen 37927P Washer Timer Instruction Manual

1. Introduction

The Speed Queen 37927P is a genuine replacement timer designed for specific Amana washer models. This component is crucial for controlling the various cycles and functions of the washing machine, ensuring proper operation and timing of wash, rinse, and spin cycles. It is manufactured to meet original equipment specifications, providing reliable performance as a direct replacement part.

2. Safety Information

WARNING: To reduce the risk of electric shock, injury, or death, always observe the following safety precautions:

• Always disconnect the appliance from its power source before attempting any installation, repair, or maintenance procedures.
• Installation and servicing should be performed by a qualified technician. If you are unsure about your ability to safely install this part, seek professional assistance.
• Wear appropriate personal protective equipment, such as gloves and eye protection, during installation.
• Ensure all wiring connections are secure and correctly matched according to the appliance's wiring diagram.
• Keep children and pets away from the work area during installation.

3. Package Contents

• 1 x Speed Queen 37927P Washer Timer
• This is a genuine replacement part. No additional components or tools are included.

4. Setup and Installation

The Speed Queen 37927P timer is a replacement part for existing washing machine timers. Installation typically involves replacing the old timer with this new unit. Due to variations in appliance models, it is essential to consult your specific washing machine's service manual for detailed, model-specific installation instructions.

General Installation Steps:

1. Disconnect Power: Ensure the washing machine is completely disconnected from its electrical power supply. Turn off the circuit breaker or unplug the appliance.
2. Access the Timer: Depending on your washer model, you may need to remove the control panel or other access covers to reach the timer assembly.
3. Document Wiring: Before disconnecting any wires, take clear photographs or make a detailed diagram of the existing wiring connections to the old timer. This will ensure correct re-connection.
4. Disconnect Old Timer: Carefully disconnect all wires from the old timer and unmount it from its position.
5. Install New Timer: Mount the new Speed Queen 37927P timer in the same location as the old one.
6. Connect Wiring: Reconnect all wires to the new timer, matching them precisely according to your documentation from step 3. Double-check all connections for security.
7. Reassemble: Reattach any covers or control panels that were removed.
8. Restore Power: Once fully reassembled and all connections are verified, restore power to the washing machine.

Image of the Speed Queen 37927P washer timer, showing its electrical connectors and housing.

5. Operating Instructions

The 37927P timer functions as an integral control component within your washing machine's system. Its operation is not directly controlled by the user but is managed through the washer's main control knob or electronic interface. Once installed, the timer will automatically regulate the various stages of the wash cycle based on the user's selection on the washing machine's control panel.

For specific cycle selections, operational procedures, and understanding of your washing machine's functions, please refer to your washing machine's original user manual.

6. Maintenance

The Speed Queen 37927P timer is a sealed electrical component and does not require routine user maintenance. To ensure its longevity and proper function:

• Keep the area around the timer and control panel clean and free from dust, lint, and moisture.
• Avoid exposing the washing machine to excessive humidity or water splashes.
• Do not attempt to open or repair the timer unit, as this may void any applicable warranty and could lead to electrical hazards.

7. Troubleshooting

If your washing machine exhibits issues after replacing the timer, consider the following:

• Washer Not Starting: Ensure the washing machine is properly plugged in and receiving power. Check the circuit breaker. Verify all wiring connections to the new timer are secure and correct.
• Cycles Not Advancing or Incorrect Timing: This could indicate an issue with the timer itself or other related components. Double-check all wiring.
• Error Codes: If your washing machine displays error codes, consult your washer's user manual or service manual for their meaning and recommended solutions.

If problems persist after verifying connections and basic checks, it is recommended to contact a qualified appliance technician for diagnosis and repair. Do not attempt complex electrical repairs yourself unless you are qualified.

8. Specifications

9. Warranty Information

The Speed Queen 37927P is a genuine OEM (Original Equipment Manufacturer) part. Specific warranty coverage for this replacement part is typically provided by the manufacturer. For detailed information regarding the warranty period, terms, and conditions, please refer to the official Speed Queen warranty statement that accompanied your original appliance or contact Speed Queen customer support directly.

10. Customer Support

For technical assistance, inquiries about replacement parts, or warranty claims, please contact Speed Queen customer service. You can typically find contact information, including phone numbers and online support portals, on the official Speed Queen website:

Official Website: www.speedqueen.com

When contacting support, please have your washing machine's model and serial number, as well as the part number (37927P), readily available.